code 80240016 on last WU ... though no problem ... ?

I just updated my Vista SP2 computer and during the installation saw the
error code 80240016. When the computer rebooted everything was fine, all
the updates were installed. Just for good measure I tried WU again and
there were no updates to be had.

This is not typical behavior but everything seems fine. Just passing this
on.

All the best, Dave Horne

All HR results are not necessarily *error codes*, they are *result* codes.
0x80240016 signifies that the result came from the Windows Update Agent
and the system was pending a mandatory restart.
That's all it meant, Dave.

Appendix G: Windows Update Agent Result Codes
http://technet.microsoft.com/en-us/l...42(WS.10).aspx

MowGreen
================
* -343-* FDNY
Never Forgotten
================

banthecheck.com
"Security updates should *never* have *non-security content* prechecked



Dave Horne wrote:
> I just updated my Vista SP2 computer and during the installation saw the
> error code 80240016. When the computer rebooted everything was fine, all
> the updates were installed. Just for good measure I tried WU again and
> there were no updates to be had.
>
> This is not typical behavior but everything seems fine. Just passing
> this on.
>
> All the best, Dave Horne

Mow, thanks for the info. DH



"MowGreen" <mowgreen@nowandzen.com> wrote in message
news:%23NM%23xnnqKHA.3848@TK2MSFTNGP06.phx.gbl...
> All HR results are not necessarily *error codes*, they are *result* codes.
> 0x80240016 signifies that the result came from the Windows Update Agent
> and the system was pending a mandatory restart.
> That's all it meant, Dave.
>
> Appendix G: Windows Update Agent Result Codes
> http://technet.microsoft.com/en-us/l...42(WS.10).aspx
>
> MowGreen
> ================
> * -343-* FDNY
> Never Forgotten
> ================
>
> banthecheck.com
> "Security updates should *never* have *non-security content* prechecked
>
>
>
> Dave Horne wrote:
>> I just updated my Vista SP2 computer and during the installation saw the
>> error code 80240016. When the computer rebooted everything was fine, all
>> the updates were installed. Just for good measure I tried WU again and
>> there were no updates to be had.
>>
>> This is not typical behavior but everything seems fine. Just passing
>> this on.
>>
>> All the best, Dave Horne