Microsoft .NET Framework 2.0 Service Pack

I also am having issues with Quickbooks b/c of this .NET update. I have
payroll to run for my client tomorrow - eeks! I tried Method 1, but it will
not allow me to uninstall b/c it says it cannot find the original source.
Any other ideas? I have not tried Method 2 yet - quite honestly, it makes me
uncomfortable installing, uninstalling, etc. b/c I hate to find that I've dug
a deeper hole.

Any updates are appreciated. I have no idea what I'll do if I cannot run
payroll. I'm so glad I've at least found these threads and know I'm not
alone.

Kristin in PA

"PA Bear [MS MVP]" wrote:

> See Resolution: Method 1 (preferable) or Method 2 in
> http://support.microsoft.com/kb/923100
>
> If no joy, see this related post by my colleague MowGreen:
> http://groups.google.com/group/micro...76de7769d04493
>
> How to determine which versions of the .NET Framework are installed and
> whether service packs have been applied
> http://support.microsoft.com/kb/318785
> --
> ~Robear Dyer (PA Bear)
> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
> AumHa VSOP & Admin http://aumha.net
> DTS-L http://dts-l.net/
>
>
> Heart wrote:
> > This morning I could not open Quicbooks. When I checked the Intuit web
> > site,
> > They recommended removing and then reinstalling Microsoft .NET Framework
> > 2.0
> > Service Pack. I have tried to remove Microsoft .NET Framework 2.0 Service
> > Pack and reinstall.
> >
> > During the removal, I got the following message:
> > Program has encountered a problem during setup.
> > Setup did not complete correctly.
> >
> > I then checked for updates. The recommended updates were both Framework
> > 2.0
> > and 3.0. I tried downloading and installing the updates. I got the
> > following
> > error message:
> > Error Code: 0x643
> > Try to install the update again, or request help from one of the following
> > resources.
> >
> > For self-help options:
> >
> > Frequently Asked Questions
> > Find Solutions
> > Windows Update Newsgroup
> >
> > I have worked through the first two options with no success. I am now at
> > the
> > third. Does anyone have a recommendation on what to do next?
>
>

Method 1 didn't work for me;however method 2 worked PERFECTLY.I don't know
what damage I may have caused to my computer using the automatic cleanup
tool,but when I rebooted,Quickbooks opened up,& then all the automatic
updates downloaded(although rather slowly).Good luck-this mishap cost me
almost $2,000 because Quickbooks wasn't working when I needed it.

"Kristin in PA" wrote:

> I also am having issues with Quickbooks b/c of this .NET update. I have
> payroll to run for my client tomorrow - eeks! I tried Method 1, but it will
> not allow me to uninstall b/c it says it cannot find the original source.
> Any other ideas? I have not tried Method 2 yet - quite honestly, it makes me
> uncomfortable installing, uninstalling, etc. b/c I hate to find that I've dug
> a deeper hole.
>
> Any updates are appreciated. I have no idea what I'll do if I cannot run
> payroll. I'm so glad I've at least found these threads and know I'm not
> alone.
>
> Kristin in PA
>
> "PA Bear [MS MVP]" wrote:
>
> > See Resolution: Method 1 (preferable) or Method 2 in
> > http://support.microsoft.com/kb/923100
> >
> > If no joy, see this related post by my colleague MowGreen:
> > http://groups.google.com/group/micro...76de7769d04493
> >
> > How to determine which versions of the .NET Framework are installed and
> > whether service packs have been applied
> > http://support.microsoft.com/kb/318785
> > --
> > ~Robear Dyer (PA Bear)
> > MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
> > AumHa VSOP & Admin http://aumha.net
> > DTS-L http://dts-l.net/
> >
> >
> > Heart wrote:
> > > This morning I could not open Quicbooks. When I checked the Intuit web
> > > site,
> > > They recommended removing and then reinstalling Microsoft .NET Framework
> > > 2.0
> > > Service Pack. I have tried to remove Microsoft .NET Framework 2.0 Service
> > > Pack and reinstall.
> > >
> > > During the removal, I got the following message:
> > > Program has encountered a problem during setup.
> > > Setup did not complete correctly.
> > >
> > > I then checked for updates. The recommended updates were both Framework
> > > 2.0
> > > and 3.0. I tried downloading and installing the updates. I got the
> > > following
> > > error message:
> > > Error Code: 0x643
> > > Try to install the update again, or request help from one of the following
> > > resources.
> > >
> > > For self-help options:
> > >
> > > Frequently Asked Questions
> > > Find Solutions
> > > Windows Update Newsgroup
> > >
> > > I have worked through the first two options with no success. I am now at
> > > the
> > > third. Does anyone have a recommendation on what to do next?
> >
> >

PROBLEM FINALLY SOLVED. My anti-spyware program was the culprit. When I
shut down Sunbelt's Counter Spy in Services.msc, I was able to install both
the Service Pack for Net Framework 2 as well as Net Framework 3. Hope this
helps!


"rufus" <rufus@discussions.microsoft.com> wrote in message
news:15BABE47-A4E4-41E6-84C3-B1D6731A431F@microsoft.com...
> Method 1 didn't work for me;however method 2 worked PERFECTLY.I don't know
> what damage I may have caused to my computer using the automatic cleanup
> tool,but when I rebooted,Quickbooks opened up,& then all the automatic
> updates downloaded(although rather slowly).Good luck-this mishap cost me
> almost $2,000 because Quickbooks wasn't working when I needed it.
>
> "Kristin in PA" wrote:
>
>> I also am having issues with Quickbooks b/c of this .NET update. I have
>> payroll to run for my client tomorrow - eeks! I tried Method 1, but it
>> will
>> not allow me to uninstall b/c it says it cannot find the original source.
>> Any other ideas? I have not tried Method 2 yet - quite honestly, it
>> makes me
>> uncomfortable installing, uninstalling, etc. b/c I hate to find that I've
>> dug
>> a deeper hole.
>>
>> Any updates are appreciated. I have no idea what I'll do if I cannot run
>> payroll. I'm so glad I've at least found these threads and know I'm not
>> alone.
>>
>> Kristin in PA
>>
>> "PA Bear [MS MVP]" wrote:
>>
>> > See Resolution: Method 1 (preferable) or Method 2 in
>> > http://support.microsoft.com/kb/923100
>> >
>> > If no joy, see this related post by my colleague MowGreen:
>> > http://groups.google.com/group/micro...76de7769d04493
>> >
>> > How to determine which versions of the .NET Framework are installed and
>> > whether service packs have been applied
>> > http://support.microsoft.com/kb/318785
>> > --
>> > ~Robear Dyer (PA Bear)
>> > MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
>> > AumHa VSOP & Admin http://aumha.net
>> > DTS-L http://dts-l.net/
>> >
>> >
>> > Heart wrote:
>> > > This morning I could not open Quicbooks. When I checked the Intuit
>> > > web
>> > > site,
>> > > They recommended removing and then reinstalling Microsoft .NET
>> > > Framework
>> > > 2.0
>> > > Service Pack. I have tried to remove Microsoft .NET Framework 2.0
>> > > Service
>> > > Pack and reinstall.
>> > >
>> > > During the removal, I got the following message:
>> > > Program has encountered a problem during setup.
>> > > Setup did not complete correctly.
>> > >
>> > > I then checked for updates. The recommended updates were both
>> > > Framework
>> > > 2.0
>> > > and 3.0. I tried downloading and installing the updates. I got the
>> > > following
>> > > error message:
>> > > Error Code: 0x643
>> > > Try to install the update again, or request help from one of the
>> > > following
>> > > resources.
>> > >
>> > > For self-help options:
>> > >
>> > > Frequently Asked Questions
>> > > Find Solutions
>> > > Windows Update Newsgroup
>> > >
>> > > I have worked through the first two options with no success. I am now
>> > > at
>> > > the
>> > > third. Does anyone have a recommendation on what to do next?
>> >
>> >

I have a true fix for Microsoft.net frame 2.0 I have spent countless hours
researching this subject. It started when one of our office computers would
not load Quick books. I would like to ask for a small donation for my help,
I am
trying to scrape up some cash for a new computer. You can reach me at
ebaybilljo39@yahoo.com or call me at 206 664 1913.


"Heart" wrote:

> This morning I could not open Quicbooks. When I checked the Intuit web site,
> They recommended removing and then reinstalling Microsoft .NET Framework 2.0
> Service Pack. I have tried to remove Microsoft .NET Framework 2.0 Service
> Pack and reinstall.
>
> During the removal, I got the following message:
> Program has encountered a problem during setup.
> Setup did not complete correctly.
>
> I then checked for updates. The recommended updates were both Framework 2.0
> and 3.0. I tried downloading and installing the updates. I got the following
> error message:
> Error Code: 0x643
> Try to install the update again, or request help from one of the following
> resources.
>
> For self-help options:
>
> Frequently Asked Questions
> Find Solutions
> Windows Update Newsgroup
>
> I have worked through the first two options with no success. I am now at the
> third. Does anyone have a recommendation on what to do next?
>
> --
> Heart

Why pay you when the resolution's available here for free?

billjo39 wrote:
> I have a true fix for Microsoft.net frame 2.0 I have spent countless
> hours
> researching this subject. It started when one of our office computers
> would
> not load Quick books. I would like to ask for a small donation for my
> help,
> I am
> trying to scrape up some cash for a new computer. You can reach me at
> ebaybilljo39@yahoo.com or call me at 206 664 1913.
>
>
> "Heart" wrote:
>
>> This morning I could not open Quicbooks. When I checked the Intuit web
>> site, They recommended removing and then reinstalling Microsoft .NET
>> Framework 2.0 Service Pack. I have tried to remove Microsoft .NET
>> Framework 2.0 Service Pack and reinstall.
>>
>> During the removal, I got the following message:
>> Program has encountered a problem during setup.
>> Setup did not complete correctly.
>>
>> I then checked for updates. The recommended updates were both Framework
>> 2.0
>> and 3.0. I tried downloading and installing the updates. I got the
>> following error message:
>> Error Code: 0x643
>> Try to install the update again, or request help from one of the
>> following
>> resources.
>>
>> For self-help options:
>>
>> Frequently Asked Questions
>> Find Solutions
>> Windows Update Newsgroup
>>
>> I have worked through the first two options with no success. I am now at
>> the third. Does anyone have a recommendation on what to do next?
>>
>> --
>> Heart