Scanjet 7400C

Installed just-released HP driver for 7400C scanner

Hardware configuration works fine on XP

Initally tests OK under Camera and Scanner Imaging Control
Panel

When I try to scan using Windows Fax and Scan the I can select the scanner
and options and when I press the scan button the scan initally starts then
halts. After a while I get a message box "A problem prevented the document
from being scanned. Please try again..."

I can not try again because the system no longer sees the scanner again and
must reboot

Problem repeats every time

Any ideas?

Some reading for you.. the first link contains the bad news.. HP have
discontinued support for your model..

The second link contains info that will, according to those who have tried
it, bring life back to your scanner (and many others)

HP dropped support for the HP 6300 after the release of XP.. I now use and
have used since that time a Canon scanner (lide 30)

http://h10025.www1.hp.com/ewfrf/wc/s...=59553&lang=en

http://www.hamrick.com/


"Paul" <carnsux@hotmail.com> wrote in message
news:0A7B1AE5-ED5F-4A6E-8A44-4879BD725A3A@microsoft.com...
> Installed just-released HP driver for 7400C scanner
>
> Hardware configuration works fine on XP
>
> Initally tests OK under Camera and Scanner Imaging Control
> Panel
>
> When I try to scan using Windows Fax and Scan the I can select the scanner
> and options and when I press the scan button the scan initally starts then
> halts. After a while I get a message box "A problem prevented the
> document from being scanned. Please try again..."
>
> I can not try again because the system no longer sees the scanner again
> and must reboot
>
> Problem repeats every time
>
> Any ideas?
>

--


Mike Hall
MS MVP Windows Shell/User
http://msmvps.com/blogs/mikehall/

Any luck using the HP XP scanning software running in XP compatibility mode?
I have a HP 5470c scanner and the HP XP scanning software works perfectly,
although I haven't tried to use Ultimate's native Windows Fax and Scan.


"Mike Hall MVP" <mikehall@mvps.org> wrote in message
news:%23DVvDfmiHHA.4112@TK2MSFTNGP04.phx.gbl...
> Some reading for you.. the first link contains the bad news.. HP have
> discontinued support for your model..
>
> The second link contains info that will, according to those who have tried it,
> bring life back to your scanner (and many others)
>
> HP dropped support for the HP 6300 after the release of XP.. I now use and
> have used since that time a Canon scanner (lide 30)
>
> http://h10025.www1.hp.com/ewfrf/wc/s...=59553&lang=en
>
> http://www.hamrick.com/
>
>
> "Paul" <carnsux@hotmail.com> wrote in message
> news:0A7B1AE5-ED5F-4A6E-8A44-4879BD725A3A@microsoft.com...
>> Installed just-released HP driver for 7400C scanner
>>
>> Hardware configuration works fine on XP
>>
>> Initally tests OK under Camera and Scanner Imaging Control
>> Panel
>>
>> When I try to scan using Windows Fax and Scan the I can select the scanner
>> and options and when I press the scan button the scan initally starts then
>> halts. After a while I get a message box "A problem prevented the document
>> from being scanned. Please try again..."
>>
>> I can not try again because the system no longer sees the scanner again and
>> must reboot
>>
>> Problem repeats every time
>>
>> Any ideas?
>>
>
> --
>
>
> Mike Hall
> MS MVP Windows Shell/User
> http://msmvps.com/blogs/mikehall/
>
>
>

"Paul" <carnsux@hotmail.com> wrote in message
news:0A7B1AE5-ED5F-4A6E-8A44-4879BD725A3A@microsoft.com...
> Installed just-released HP driver for 7400C scanner
>
> Hardware configuration works fine on XP
>
> Initally tests OK under Camera and Scanner Imaging Control
> Panel
>
> When I try to scan using Windows Fax and Scan the I can select the scanner
> and options and when I press the scan button the scan initally starts then
> halts. After a while I get a message box "A problem prevented the
> document from being scanned. Please try again..."
>
> I can not try again because the system no longer sees the scanner again
> and must reboot
>
> Problem repeats every time
>
> Any ideas?
>

I don't have a fix, but I can tell you that the same driver works OK with my
7400c on Vista.
I can scan from within Windows Photo Gallery, and 3-rd party apps see it as
a TWAIN source OK.

Perhaps you could un-install the device and re-install the drivers again?

--
Ron

I'd uninstall and install again using Right mouse click and Run As
Administrator on the HP file to start the installation.

Make sure you follow the HP instructions and do not have the scanner or
its USB cable plugged into the PC when you install the software

Installation Instructions

Run the downloaded file to install the driver.

On Windows Vista, you may get a Program Compatibility Assistant warning
that the program may not have installed correctly. Click This program
installed correctly. DO NOT click "Reinstall using recommended
settings."

Connect the scanner to the PC after installing the driver. <<----

When the installation has completed, you can delete the downloaded
file.

Paul, I feel your pain.

I have the exact same issue (Windows Vista 32-bit Business Edition).
The scanner fails to scan in any application I have tried it with
(Windows Fax & Scan, Photoshop 7, and Windows Photo Gallery). With Fax &
Scan, it begins scanning but halts halfway through, there is a long
pause and then I receive the following error:

"An error occured while setting scanner properties. If another program
is scanning, please wait for it to complete and try again"

I have completely uninstalled the drivers using Device Manager, and
manually deleted the files out of Windows\System32. No difference. I
have also unplugged the scanner, installed the driver, and plugged it in
after the fact. Actually - that's another clue... Windows acts like it
doesn't know what it is when I do that. If I let Vista search for a
driver, it comes up with the HP Vista driver, but the end result is the
same.

The only thing I can think of (short of basically saying that HP did
not fully test this driver and that it is at least partially broken) is
that maybe some remnants of previous drivers that I tried to use to get
the scanner to work with Vista have screwed thing up.

I had previously tried the HP 7400C driver for Windows XP and the
VueScan driver. As we all know, the XP driver does not install properly
(maybe that's what's causing the problem), and the VueScan driver simply
did not work at all for me.

The scanner works - I know this because I dual-boot with XP Pro, and
the scanner works fine.


--
hitman05