NEC Superscript 1260

Hoping someone here can help out. I have the above NEC Laser printer and
love it. But unfortunately, Vista isn't recognizing the printer. I've been
on NEC's website for product support and I'm told that they are not
developing a driver for Vista. The printer worked fine with XP. Is there
anyway around this? This printer cost me over $1000 so I really want to be
able to use it with Vista. Thank you.

I would try the HP PCL driver
http://h20000.www2.hp.com/bizsupport...&swEnvOID=2093

Be careful of line breaks in the URL or use this
http://tinyurl.com/2rd2j5


Tom
MSMVP
Windows Shell/User

"Josh" <joshua_joseph@rogers.com> wrote in message
news:%23fkAZi1bHHA.4632@TK2MSFTNGP03.phx.gbl...
> Hoping someone here can help out. I have the above NEC Laser printer
> and
> love it. But unfortunately, Vista isn't recognizing the printer.
> I've been
> on NEC's website for product support and I'm told that they are not
> developing a driver for Vista. The printer worked fine with XP. Is
> there
> anyway around this? This printer cost me over $1000 so I really want
> to be
> able to use it with Vista. Thank you.
>

Well I tried that driver, installed it ... was able to print a test page
which didn't look quite right in format. However, after trying to print a
word doc. and a couple other emails, they would be blank or with just a few
solid lines on the page. So I'm back to square one ...


"Tom Ferguson" <tom.msmvp@gmail.com> wrote in message
news:OQjyiK2bHHA.1508@TK2MSFTNGP06.phx.gbl...
>I would try the HP PCL driver
> http://h20000.www2.hp.com/bizsupport...&swEnvOID=2093
>
> Be careful of line breaks in the URL or use this
> http://tinyurl.com/2rd2j5
>
>
> Tom
> MSMVP
> Windows Shell/User
>
> "Josh" <joshua_joseph@rogers.com> wrote in message
> news:%23fkAZi1bHHA.4632@TK2MSFTNGP03.phx.gbl...
>> Hoping someone here can help out. I have the above NEC Laser printer and
>> love it. But unfortunately, Vista isn't recognizing the printer. I've
>> been
>> on NEC's website for product support and I'm told that they are not
>> developing a driver for Vista. The printer worked fine with XP. Is
>> there
>> anyway around this? This printer cost me over $1000 so I really want to
>> be
>> able to use it with Vista. Thank you.
>>
>

OK. Try this one. I hold out little hope but nothing to lose.

http://h20000.www2.hp.com/bizsupport...eriesId=503548

Tom
MSMVP
Windows Shell/User

"Josh" <s_w_a_k@hotmail.com> wrote in message
news:OsGvZq2bHHA.1508@TK2MSFTNGP06.phx.gbl...
> Well I tried that driver, installed it ... was able to print a test
> page which didn't look quite right in format. However, after trying
> to print a word doc. and a couple other emails, they would be blank or
> with just a few solid lines on the page. So I'm back to square one
> ...
>
>
> "Tom Ferguson" <tom.msmvp@gmail.com> wrote in message
> news:OQjyiK2bHHA.1508@TK2MSFTNGP06.phx.gbl...
>>I would try the HP PCL driver
>> http://h20000.www2.hp.com/bizsupport...&swEnvOID=2093
>>
>> Be careful of line breaks in the URL or use this
>> http://tinyurl.com/2rd2j5
>>
>>
>> Tom
>> MSMVP
>> Windows Shell/User
>>
>> "Josh" <joshua_joseph@rogers.com> wrote in message
>> news:%23fkAZi1bHHA.4632@TK2MSFTNGP03.phx.gbl...
>>> Hoping someone here can help out. I have the above NEC Laser
>>> printer and
>>> love it. But unfortunately, Vista isn't recognizing the printer.
>>> I've been
>>> on NEC's website for product support and I'm told that they are not
>>> developing a driver for Vista. The printer worked fine with XP. Is
>>> there
>>> anyway around this? This printer cost me over $1000 so I really
>>> want to be
>>> able to use it with Vista. Thank you.
>>>
>>
>

No go ... Didn't work at all ... URGH!


"Tom Ferguson" <tom.msmvp@gmail.com> wrote in message
news:uDbn5O%23bHHA.4772@TK2MSFTNGP05.phx.gbl...
> OK. Try this one. I hold out little hope but nothing to lose.
>
> http://h20000.www2.hp.com/bizsupport...eriesId=503548
>
> Tom
> MSMVP
> Windows Shell/User
>
> "Josh" <s_w_a_k@hotmail.com> wrote in message
> news:OsGvZq2bHHA.1508@TK2MSFTNGP06.phx.gbl...
>> Well I tried that driver, installed it ... was able to print a test page
>> which didn't look quite right in format. However, after trying to print
>> a word doc. and a couple other emails, they would be blank or with just a
>> few solid lines on the page. So I'm back to square one ...
>>
>>
>> "Tom Ferguson" <tom.msmvp@gmail.com> wrote in message
>> news:OQjyiK2bHHA.1508@TK2MSFTNGP06.phx.gbl...
>>>I would try the HP PCL driver
>>> http://h20000.www2.hp.com/bizsupport...&swEnvOID=2093
>>>
>>> Be careful of line breaks in the URL or use this
>>> http://tinyurl.com/2rd2j5
>>>
>>>
>>> Tom
>>> MSMVP
>>> Windows Shell/User
>>>
>>> "Josh" <joshua_joseph@rogers.com> wrote in message
>>> news:%23fkAZi1bHHA.4632@TK2MSFTNGP03.phx.gbl...
>>>> Hoping someone here can help out. I have the above NEC Laser printer
>>>> and
>>>> love it. But unfortunately, Vista isn't recognizing the printer. I've
>>>> been
>>>> on NEC's website for product support and I'm told that they are not
>>>> developing a driver for Vista. The printer worked fine with XP. Is
>>>> there
>>>> anyway around this? This printer cost me over $1000 so I really want
>>>> to be
>>>> able to use it with Vista. Thank you.
>>>>
>>>
>>
>

Sorry. We seem to have reached the end of that particular string.

Tom

"Josh" <s_w_a_k@hotmail.com> wrote in message
news:OW%23cwmBcHHA.596@TK2MSFTNGP06.phx.gbl...
> No go ... Didn't work at all ... URGH!
>
>
> "Tom Ferguson" <tom.msmvp@gmail.com> wrote in message
> news:uDbn5O%23bHHA.4772@TK2MSFTNGP05.phx.gbl...
>> OK. Try this one. I hold out little hope but nothing to lose.
>>
>> http://h20000.www2.hp.com/bizsupport...eriesId=503548
>>
>> Tom
>> MSMVP
>> Windows Shell/User
>>
>> "Josh" <s_w_a_k@hotmail.com> wrote in message
>> news:OsGvZq2bHHA.1508@TK2MSFTNGP06.phx.gbl...
>>> Well I tried that driver, installed it ... was able to print a test
>>> page which didn't look quite right in format. However, after trying
>>> to print a word doc. and a couple other emails, they would be blank
>>> or with just a few solid lines on the page. So I'm back to square
>>> one ...
>>>
>>>
>>> "Tom Ferguson" <tom.msmvp@gmail.com> wrote in message
>>> news:OQjyiK2bHHA.1508@TK2MSFTNGP06.phx.gbl...
>>>>I would try the HP PCL driver
>>>> http://h20000.www2.hp.com/bizsupport...&swEnvOID=2093
>>>>
>>>> Be careful of line breaks in the URL or use this
>>>> http://tinyurl.com/2rd2j5
>>>>
>>>>
>>>> Tom
>>>> MSMVP
>>>> Windows Shell/User
>>>>
>>>> "Josh" <joshua_joseph@rogers.com> wrote in message
>>>> news:%23fkAZi1bHHA.4632@TK2MSFTNGP03.phx.gbl...
>>>>> Hoping someone here can help out. I have the above NEC Laser
>>>>> printer and
>>>>> love it. But unfortunately, Vista isn't recognizing the printer.
>>>>> I've been
>>>>> on NEC's website for product support and I'm told that they are
>>>>> not
>>>>> developing a driver for Vista. The printer worked fine with XP.
>>>>> Is there
>>>>> anyway around this? This printer cost me over $1000 so I really
>>>>> want to be
>>>>> able to use it with Vista. Thank you.
>>>>>
>>>>
>>>
>>
>