HP 1012 Laserjet driver.

Does anyone know if HP has yet produced a driver for the 1012 LaserJet for
Vista?

Many thanks,

Peter.

In article <uAaiNHjzIHA.2188@TK2MSFTNGP04.phx.gbl>, Pvr wrote:

> Does anyone know if HP has yet produced a driver for the 1012 LaserJet for*
> Vista?

There isn't one on their website for the LJ1012 but have you tried installing
the XP printer software using compatibility mode and Run as Administrator?

You must follow the usual USB procedure of installing the software before you
connect the USB cable to the PC.

If you have something already installed, remove HP software using Control
Panel / Remove Programs and delete any printer icon in Control Panel /
Printers and reboot, all with the printer disconnected.

Try the HP LJ 4 driver on the Vista DVD. No guarantee- a bit of a shot in
the twilight.

Tom
MSMVP 1998-2007

"PVR" <peterv666@.adelphia.com> wrote in message
news:uAaiNHjzIHA.2188@TK2MSFTNGP04.phx.gbl...
> Does anyone know if HP has yet produced a driver for the 1012 LaserJet for
> Vista?
>
> Many thanks,
>
> Peter.
>

I have the even older Laserjet 1010 and not sure is this is correct by I
got my printer to work so thought I'd pass it along....

Hook up your printer and let Windows tell you it know a printer is on
the generic IEEE port but can't find it.

Grab the PCL 6 universal HP driver. (I didn't try the PCL5 driver!)

http://tinyurl.com/5nlyvy

Get that installed.

Goto the control panel and double click the printer icon. Right click
on the right side of the screen and choose the add a printer.

Select the Dot4_001 Generic IEEE port and then choose the HP Laserjet
Family Driver PCL5. This will install the printer - print a test page
and you're done.

As I say, I used this procedure to get my laserjet 1010 printing so
hope it works for you.


--
Justpassing
------------------------------------------------------------------------
Justpassing's Profile: http://forums.techarena.in/member.php?u=53227
View this thread: http://forums.techarena.in/showthread.php?t=986258

http://forums.techarena.in

[Riv]

The above caused by NEW Hp slimline to be unable to start and needing a system restore. Plus I read somewhere that the 1012 is not a PCL printer.

Try it with caution and make certain you have a recent restore point.

Good post. I have a Gateway with Vista and I connected the HP 1012 to
find that HP and Windows dropped the ball on providing a driver for it
to work. Your suggested solution allowed me to print a test page.


--
MinorityMan77
------------------------------------------------------------------------
MinorityMan77's Profile: http://forums.techarena.in/members/minorityman77.htm
View this thread: http://forums.techarena.in/vista-print-fax/986258.htm

http://forums.techarena.in

select laserjet 1015......it works


--
RBLA