Print spooler stops running

I have a Gateway laptop running Vista Home Premium. I also have a Dell 4600
on which I have a Epson Stylus Color 600 installed. I can share this printer
with another computer running Windows 98SE with no problem. When I try to add
this printer and share it with laptop on my network I get the message telling
me that the spooler subsystem has stopped running. When I restart it and
reboot I get the message again that it has stopped. The only way I can clear
this problem is to do a restore system to a good working date. This has been
happening since the day I first put my laptop in service. I am able to print
to PrimoPDF which I resorted to after being unable to install my printer. It
looks like a lot of others running Vista are experiencing the same problem I
have. Do you think SP1 will address this problem?

Remove printer from registry than update vista, printer driver and adobe
reader. If you print from adobe, print as an image.

good lack

Boba Vankufer

"Kenny" <Kenny@discussions.microsoft.com> wrote in message
news:15358F2A-351C-4A27-B9AD-1B94881ADD17@microsoft.com...
>I have a Gateway laptop running Vista Home Premium. I also have a Dell 4600
> on which I have a Epson Stylus Color 600 installed. I can share this
> printer
> with another computer running Windows 98SE with no problem. When I try to
> add
> this printer and share it with laptop on my network I get the message
> telling
> me that the spooler subsystem has stopped running. When I restart it and
> reboot I get the message again that it has stopped. The only way I can
> clear
> this problem is to do a restore system to a good working date. This has
> been
> happening since the day I first put my laptop in service. I am able to
> print
> to PrimoPDF which I resorted to after being unable to install my printer.
> It
> looks like a lot of others running Vista are experiencing the same problem
> I
> have. Do you think SP1 will address this problem?

I am sure this is a dumb question - but how do I remove a printer from the
registry.

"Boba & Ilinka" wrote:

> Remove printer from registry than update vista, printer driver and adobe
> reader. If you print from adobe, print as an image.
>
> good lack
>
> Boba Vankufer
>
> "Kenny" <Kenny@discussions.microsoft.com> wrote in message
> news:15358F2A-351C-4A27-B9AD-1B94881ADD17@microsoft.com...
> >I have a Gateway laptop running Vista Home Premium. I also have a Dell 4600
> > on which I have a Epson Stylus Color 600 installed. I can share this
> > printer
> > with another computer running Windows 98SE with no problem. When I try to
> > add
> > this printer and share it with laptop on my network I get the message
> > telling
> > me that the spooler subsystem has stopped running. When I restart it and
> > reboot I get the message again that it has stopped. The only way I can
> > clear
> > this problem is to do a restore system to a good working date. This has
> > been
> > happening since the day I first put my laptop in service. I am able to
> > print
> > to PrimoPDF which I resorted to after being unable to install my printer.
> > It
> > looks like a lot of others running Vista are experiencing the same problem
> > I
> > have. Do you think SP1 will address this problem?
>
>

not dumb, it's the last step when all others fail.

http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/search/?adv=1

This posting is provided "AS IS" with no warranties, and confers no rights.

"joy" <joy@discussions.microsoft.com> wrote in message
news:675BE49B-3399-4CB9-B36A-FBD3BE74B628@microsoft.com...
>I am sure this is a dumb question - but how do I remove a printer from the
> registry.
>
> "Boba & Ilinka" wrote:
>
>> Remove printer from registry than update vista, printer driver and adobe
>> reader. If you print from adobe, print as an image.
>>
>> good lack
>>
>> Boba Vankufer
>>
>> "Kenny" <Kenny@discussions.microsoft.com> wrote in message
>> news:15358F2A-351C-4A27-B9AD-1B94881ADD17@microsoft.com...
>> >I have a Gateway laptop running Vista Home Premium. I also have a Dell
>> >4600
>> > on which I have a Epson Stylus Color 600 installed. I can share this
>> > printer
>> > with another computer running Windows 98SE with no problem. When I try
>> > to
>> > add
>> > this printer and share it with laptop on my network I get the message
>> > telling
>> > me that the spooler subsystem has stopped running. When I restart it
>> > and
>> > reboot I get the message again that it has stopped. The only way I can
>> > clear
>> > this problem is to do a restore system to a good working date. This has
>> > been
>> > happening since the day I first put my laptop in service. I am able to
>> > print
>> > to PrimoPDF which I resorted to after being unable to install my
>> > printer.
>> > It
>> > looks like a lot of others running Vista are experiencing the same
>> > problem
>> > I
>> > have. Do you think SP1 will address this problem?
>>
>>

I am currently using an IBM Lenovo T61 Thinkpad notebook running Windows
Vista 32-bit Edition. I am experiencing problems with my EPSON CX3810
printer. The scanner part of the printer is working fine, but when I go
to print, I get an error message that says "Spooler SubSystem App has
stopped working". I've tried everything to fix this from reinstalling
the driver, deleting it out of the registry, and manually trying to
install the printer, but none of it has worked. I know I have downloaded
the right driver from EPSON and that it has worked in the past. (I
recently had my hard drive reimaged, and prior to the reimaging the
printer had worked fine). I have an EPSON Stylus 600 at home and that
works without a problem. Any help on this subject would be greatly
appreciated.


--
pescatch
------------------------------------------------------------------------
pescatch's Profile: http://forums.techarena.in/members/pescatch.htm
View this thread: http://forums.techarena.in/vista-print-fax/947116.htm

http://forums.techarena.in

The most common cause of a spooler sub-system failure is indeed problems
with the printer driver(s). I suggest you try deleting the driver (again),
cleaning up, and re-installing the drivers.

http://www.epson.ca/cgi-bin/ceStore/...atform=Windows

This site might help with the driver clean-up.
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
--

Tom
MSMVP 1998-2007


"pescatch" <pescatch.3fig3c@DoNotSpam.com> wrote in message
newsescatch.3fig3c@DoNotSpam.com...
>
> I am currently using an IBM Lenovo T61 Thinkpad notebook running Windows
> Vista 32-bit Edition. I am experiencing problems with my EPSON CX3810
> printer. The scanner part of the printer is working fine, but when I go
> to print, I get an error message that says "Spooler SubSystem App has
> stopped working". I've tried everything to fix this from reinstalling
> the driver, deleting it out of the registry, and manually trying to
> install the printer, but none of it has worked. I know I have downloaded
> the right driver from EPSON and that it has worked in the past. (I
> recently had my hard drive reimaged, and prior to the reimaging the
> printer had worked fine). I have an EPSON Stylus 600 at home and that
> works without a problem. Any help on this subject would be greatly
> appreciated.
>
>
> --
> pescatch
> ------------------------------------------------------------------------
> pescatch's Profile: http://forums.techarena.in/members/pescatch.htm
> View this thread: http://forums.techarena.in/vista-print-fax/947116.htm
>
> http://forums.techarena.in
>