VISTA - printing problems from FSX

I KNOW that this question might be silly, but still..... here's my problem.

I bought FSX Deluxe + Acc pack some time ago. After flying the lessons for
some days i finally managed to make the solo flight and was awarded a
certificate for that. I had to fill my name in that certificate and then
print it out. The printer box opened all right and I could choose my printer,
BUT when I choose the "print" option nothing happens!!! I have tried 2
different printers and to print to file, but no print command is sent from
FSX to the printer. OK having that certificate might for someone be silly but
I think it would be a nice thing to have.

This question was originally posted at the FSX forum but I was recommended
to post it here by a member. He was pretty sure that Mr Allan Morris could
solve this problem.

I have checked the printer queue and it's empty regardless of the printer I
choose.
My printer has no problems writing in landscape-mode.
When I open the printer properties where I can se the document name, status
and so on, at the same time that I ask for a printout, I can se a quick
flicker of the message "spooling" and then nothing. It's not possible to
print to file.
It seems funny that ALL other printouts from FSX work regardless in witch
mode I have FSX.

I have MATROX TripleHead2Go installed so I can have a "wide" view in FSX.
Just to be sure I UNINSTALLED Matrox, connected the monitor directly to my PC
and tried again, but with the same result.

My Printers are HP LaserJet 5p and Canon i950 and I use Windows Vista Home
Premium. I have 2,40 GHz Core 2 Dual processors, 4 GB of RAM and a Nvidia
GeForce 8800GT graphics card.



Jack J Jackson
Sweden/Spain

One thing you might try is printing to a XPS file. That is basically
Microsoft's version of a PDF file. Once it prints to that, you can print
that to a regular printer, and on a piece of paper. If it doesn't print to
the XPS file, then post back, and we'll try something else.

And it's not silly. I have my printout for my certificate, as well. It's
well deserved.

--

Dustin Harper
dharper@vistarip.com
http://www.vistarip.com | Vista Resource & Information Page


"Jack J Jackson" <JackJJackson@discussions.microsoft.com> wrote in message
news:7039F6DB-7A69-4D92-A38B-112FAA49B0B7@microsoft.com...
>I KNOW that this question might be silly, but still..... here's my problem.
>
> I bought FSX Deluxe + Acc pack some time ago. After flying the lessons for
> some days i finally managed to make the solo flight and was awarded a
> certificate for that. I had to fill my name in that certificate and then
> print it out. The printer box opened all right and I could choose my
> printer,
> BUT when I choose the "print" option nothing happens!!! I have tried 2
> different printers and to print to file, but no print command is sent from
> FSX to the printer. OK having that certificate might for someone be silly
> but
> I think it would be a nice thing to have.
>
> This question was originally posted at the FSX forum but I was recommended
> to post it here by a member. He was pretty sure that Mr Allan Morris could
> solve this problem.
>
> I have checked the printer queue and it's empty regardless of the printer
> I
> choose.
> My printer has no problems writing in landscape-mode.
> When I open the printer properties where I can se the document name,
> status
> and so on, at the same time that I ask for a printout, I can se a quick
> flicker of the message "spooling" and then nothing. It's not possible to
> print to file.
> It seems funny that ALL other printouts from FSX work regardless in witch
> mode I have FSX.
>
> I have MATROX TripleHead2Go installed so I can have a "wide" view in FSX.
> Just to be sure I UNINSTALLED Matrox, connected the monitor directly to my
> PC
> and tried again, but with the same result.
>
> My Printers are HP LaserJet 5p and Canon i950 and I use Windows Vista Home
> Premium. I have 2,40 GHz Core 2 Dual processors, 4 GB of RAM and a Nvidia
> GeForce 8800GT graphics card.
>
>
>
> Jack J Jackson
> Sweden/Spain
>

I tried the same thing here, and it does not print on my printers (Samsung
CLP-300, and Canon Pixma 4000), and I even tried to make it as an XPS and
PDF (using DanePrairie Win2PDF), and it was not working


"Dustin Harper" <dharper@vistarip.com> wrote in message
news:53B7916F-162D-40B8-96EE-13E97237496A@microsoft.com...
> One thing you might try is printing to a XPS file. That is basically
> Microsoft's version of a PDF file. Once it prints to that, you can print
> that to a regular printer, and on a piece of paper. If it doesn't print to
> the XPS file, then post back, and we'll try something else.
>
> And it's not silly. I have my printout for my certificate, as well. It's
> well deserved.
>
> --
>
> Dustin Harper
> dharper@vistarip.com
> http://www.vistarip.com | Vista Resource & Information Page
>
>
> "Jack J Jackson" <JackJJackson@discussions.microsoft.com> wrote in message
> news:7039F6DB-7A69-4D92-A38B-112FAA49B0B7@microsoft.com...
>>I KNOW that this question might be silly, but still..... here's my
>>problem.
>>
>> I bought FSX Deluxe + Acc pack some time ago. After flying the lessons
>> for
>> some days i finally managed to make the solo flight and was awarded a
>> certificate for that. I had to fill my name in that certificate and then
>> print it out. The printer box opened all right and I could choose my
>> printer,
>> BUT when I choose the "print" option nothing happens!!! I have tried 2
>> different printers and to print to file, but no print command is sent
>> from
>> FSX to the printer. OK having that certificate might for someone be silly
>> but
>> I think it would be a nice thing to have.
>>
>> This question was originally posted at the FSX forum but I was
>> recommended
>> to post it here by a member. He was pretty sure that Mr Allan Morris
>> could
>> solve this problem.
>>
>> I have checked the printer queue and it's empty regardless of the printer
>> I
>> choose.
>> My printer has no problems writing in landscape-mode.
>> When I open the printer properties where I can se the document name,
>> status
>> and so on, at the same time that I ask for a printout, I can se a quick
>> flicker of the message "spooling" and then nothing. It's not possible to
>> print to file.
>> It seems funny that ALL other printouts from FSX work regardless in witch
>> mode I have FSX.
>>
>> I have MATROX TripleHead2Go installed so I can have a "wide" view in FSX.
>> Just to be sure I UNINSTALLED Matrox, connected the monitor directly to
>> my PC
>> and tried again, but with the same result.
>>
>> My Printers are HP LaserJet 5p and Canon i950 and I use Windows Vista
>> Home
>> Premium. I have 2,40 GHz Core 2 Dual processors, 4 GB of RAM and a Nvidia
>> GeForce 8800GT graphics card.
>>
>>
>>
>> Jack J Jackson
>> Sweden/Spain
>>
>

--
Thank You in Advance
Merci a l'avance

Martin