Backup/Restore using Vista Backup not recognising 2nd SATA drive

When I first tried to backup to a 2nd SATA disk, Windows Vista backup would
not detect the drive. However after formating it I could backup to that drive
and used the Backup Files option. After my primary hard drive crashed I
reinstalled Vista, and now want to restore the files off the 2nd disk. I can
see the Global catalog and Backed up files on the 2nd drive using Explorer,
but using Vista's Backup,Advanced Restore I cannot detect the backup
device....nor restore any of my backed up files!

Any suggestions?
Cheers

What path are you following through the wizard? Check out this blog post for
tips:

http://blogs.technet.com/filecab/arc...read-this.aspx

--
This posting is provided "AS IS" with no warranties, and confers no rights.

Want to learn more about Windows file and storage technologies? Visit our
team blog at http://blogs.technet.com/filecab/default.aspx.
"ChrisBeeChris" <ChrisBeeChris@discussions.microsoft.com> wrote in message
news:01410B0A-3B62-492A-A401-1B568D8C74D2@microsoft.com...
> When I first tried to backup to a 2nd SATA disk, Windows Vista backup
> would
> not detect the drive. However after formating it I could backup to that
> drive
> and used the Backup Files option. After my primary hard drive crashed I
> reinstalled Vista, and now want to restore the files off the 2nd disk. I
> can
> see the Global catalog and Backed up files on the 2nd drive using
> Explorer,
> but using Vista's Backup,Advanced Restore I cannot detect the backup
> device....nor restore any of my backed up files!
>
> Any suggestions?
> Cheers

Thanks... its not a restore problem as such, it is a problem with the Vista
Backup software not recognising my second SATA drive. If I go to backup
files, the secondary drive is not detected (formatted as NTFS) yet I can see
it under Windows Explorer and browse to the Global Catalogue files created
when I did a backup.

If I copied off the backup files,re formatted it so its recognised by Vista,
then copy the backup sets to it, should I be able to restore from them still?

Problem solved - The secondary hard drive was designated as the system drive,
but all the Windows and data was on the primary drive. I was unable to read
any of the restore catalogues off the secondary drive. Have no idea how this
became the system drive.

Removed the secondary drive, reformatted the primary drive and loaded Vista
back on. The primary drive was now the system drive, so connected up the
secondary drive and then was able to access the restore catalogue of it.