Microsoft Windows Vista Community Forums - Vistaheads
Recommended Download



Welcome to the Microsoft Windows Vista Community Forums - Vistaheads, YOUR Largest Resource for Windows Vista related information.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so , join our community today!

If you have any problems with the registration process or your account login, please contact us.

Driver Scanner

Using a Wireless Ethernet bridge with Vista

microsoft.public.windows.vista.networking sharing






Speedup My PC
Reply
  #1 (permalink)  
Old 02-08-2008
Andy1L
 

Posts: n/a
Using a Wireless Ethernet bridge with Vista
Hi,
I just upgraded to Vista Business on my laptop and I can't get it to connect
to the internet using my Netgear Wireless Ethernet Bridge.

The Network Identification process identifies the wired LAN and the wireless
network, tells me I'm connected to multiple networks and only grants me Local
access. I can connect to LAN devices on the other end of the bridge but it
won't connect outside of my subnet.

I have an XP desktop machine that uses the same bridge to connect to the DSL
router downstairs and it works fine. The laptop also worked fine when it was
running XP.

Any one got any ideas?
Reply With Quote
Sponsored Links
  #2 (permalink)  
Old 02-08-2008
Tom Godzone
 

Posts: n/a
RE: Using a Wireless Ethernet bridge with Vista
Hi
I have similar problem with Vista (Ultimate), XP and Netgear. Both machines
connect fine to my broadband modem and the XP connects fine through the
Netgear WPN824v2. But when i connect the Vista machine either into the
Netgear (with or without the XP machine connected) the interconnect
connection on both machines appears to drop every 15-30 mins and takes 5 mins
to recover.
I have spent many hours on the Netgear support line but the best they could
do in the end was swap out the router. Unfortunately the new one has the
same problem. My previous Linksys router displayed similar behaviour.
Conclusion - there is something odd happening with Vista?
HELP too!
Tom
--
Tom Godzone


"Andy1L" wrote:

> Hi,
> I just upgraded to Vista Business on my laptop and I can't get it to connect
> to the internet using my Netgear Wireless Ethernet Bridge.
>
> The Network Identification process identifies the wired LAN and the wireless
> network, tells me I'm connected to multiple networks and only grants me Local
> access. I can connect to LAN devices on the other end of the bridge but it
> won't connect outside of my subnet.
>
> I have an XP desktop machine that uses the same bridge to connect to the DSL
> router downstairs and it works fine. The laptop also worked fine when it was
> running XP.
>
> Any one got any ideas?

Reply With Quote
  #3 (permalink)  
Old 02-08-2008
Barb Bowman
 

Posts: n/a
Re: Using a Wireless Ethernet bridge with Vista
please post the text output of ipconfig /all

http://digitalmediaphile.wordpress.c...t-text-output/

does the netgear device have the latest firmware?

On Fri, 8 Feb 2008 00:47:00 -0800, Tom Godzone
<tomgodzone@discussions.microsoft.com> wrote:

>Hi
>I have similar problem with Vista (Ultimate), XP and Netgear. Both machines
>connect fine to my broadband modem and the XP connects fine through the
>Netgear WPN824v2. But when i connect the Vista machine either into the
>Netgear (with or without the XP machine connected) the interconnect
>connection on both machines appears to drop every 15-30 mins and takes 5 mins
>to recover.
>I have spent many hours on the Netgear support line but the best they could
>do in the end was swap out the router. Unfortunately the new one has the
>same problem. My previous Linksys router displayed similar behaviour.
>Conclusion - there is something odd happening with Vista?
>HELP too!
>Tom

--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
Reply With Quote
  #4 (permalink)  
Old 02-08-2008
Barb Bowman
 

Posts: n/a
Re: Using a Wireless Ethernet bridge with Vista
please post the text output of ipconfig /all

http://digitalmediaphile.wordpress.c...t-text-output/

does the netgear device have the latest firmware?



On Fri, 8 Feb 2008 00:25:00 -0800, Andy1L
<Andy1L@discussions.microsoft.com> wrote:

>Hi,
>I just upgraded to Vista Business on my laptop and I can't get it to connect
>to the internet using my Netgear Wireless Ethernet Bridge.
>
>The Network Identification process identifies the wired LAN and the wireless
>network, tells me I'm connected to multiple networks and only grants me Local
>access. I can connect to LAN devices on the other end of the bridge but it
>won't connect outside of my subnet.
>
>I have an XP desktop machine that uses the same bridge to connect to the DSL
>router downstairs and it works fine. The laptop also worked fine when it was
>running XP.
>
>Any one got any ideas?

--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
Reply With Quote
  #5 (permalink)  
Old 02-08-2008
Andy1L
 

Posts: n/a
Re: Using a Wireless Ethernet bridge with Vista
Hi Barb,
The Netgear has the latest firmware on it and here's the ipconfig info:

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\w112507>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : GBCWBWHLA7061
Primary Dns Suffix . . . . . . . : energis.corp.energis.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : localnet

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area
Network)
Physical Address. . . . . . . . . : 00-1E-37-5B-F8-7D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network
Con
nection
Physical Address. . . . . . . . . : 00-1C-BF-7B-F8-7F
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::1ca6:59c7:f30e:abfb%9(Preferred)
IPv4 Address. . . . . . . . . . . : 172.16.0.10(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 172.16.0.1
DHCPv6 IAID . . . . . . . . . . . : 151002303
DNS Servers . . . . . . . . . . . : 212.159.13.50
212.159.13.49
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit
Controlle
r
Physical Address. . . . . . . . . : 00-1C-23-21-32-21
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 9:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . :
isatap.{A9623A01-6A6D-49E0-B5A2-AFB0803DF
8AC}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:172.16.0.10%19(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 212.159.13.50
212.159.13.49
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 7:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . :
isatap.{634D01AE-E18D-49F3-99FE-DEECDEEC8
5F2}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 13:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . :
isatap.{72313D8D-894A-4A68-BD9C-72D3F66FD
8C4}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 10:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 17:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes


"Barb Bowman" wrote:

> please post the text output of ipconfig /all
>
> http://digitalmediaphile.wordpress.c...t-text-output/
>
> does the netgear device have the latest firmware?
>
>
>
> On Fri, 8 Feb 2008 00:25:00 -0800, Andy1L
> <Andy1L@discussions.microsoft.com> wrote:
>
> >Hi,
> >I just upgraded to Vista Business on my laptop and I can't get it to connect
> >to the internet using my Netgear Wireless Ethernet Bridge.
> >
> >The Network Identification process identifies the wired LAN and the wireless
> >network, tells me I'm connected to multiple networks and only grants me Local
> >access. I can connect to LAN devices on the other end of the bridge but it
> >won't connect outside of my subnet.
> >
> >I have an XP desktop machine that uses the same bridge to connect to the DSL
> >router downstairs and it works fine. The laptop also worked fine when it was
> >running XP.
> >
> >Any one got any ideas?

> --
>
> Barb Bowman
> MS-MVP
> http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
> http://blogs.digitalmediaphile.com/barb/
>

Reply With Quote
  #6 (permalink)  
Old 02-08-2008
Gerald
 

Posts: n/a
RE: Using a Wireless Ethernet bridge with Vista
Hi

Vista's TCP/IP stack has an ability to auto-tune the TCP/IP Window size - se
> Windows Scaling.
> Some routers and security appliances are not fully RFC 1323 compliant and
> they cannot yet handle Vista's
> stack.
>
> Go to a command prompt and open it as an administrator,
>
> Issue the following command and reboot your system, netsh int tcp set global
> autotuninglevel=disabled
>
> ***Observe to ensure that the command shell returns an OK - to indicate the
> command executed as desired.
>
> ****You may have to navigate to actually execute the command - e.g., to
> netsh and then to interface and then
> issue, the command.
>
> *****Do contact your appliance and or router vendor and advise them of the
> SPI limitation and compliance issue
> ref RFC 1323.


"Andy1L" wrote:

> Hi,
> I just upgraded to Vista Business on my laptop and I can't get it to connect
> to the internet using my Netgear Wireless Ethernet Bridge.
>
> The Network Identification process identifies the wired LAN and the wireless
> network, tells me I'm connected to multiple networks and only grants me Local
> access. I can connect to LAN devices on the other end of the bridge but it
> won't connect outside of my subnet.
>
> I have an XP desktop machine that uses the same bridge to connect to the DSL
> router downstairs and it works fine. The laptop also worked fine when it was
> running XP.
>
> Any one got any ideas?

Reply With Quote
  #7 (permalink)  
Old 02-08-2008
Andy1L
 

Posts: n/a
RE: Using a Wireless Ethernet bridge with Vista
Hi Gerald,
Thanks very much for the suggestion. I've tried it and it still refuses to
extend the connection from a "Local" to an "Internet".

I don't have a DHCP server accessible to the laptop so I have an Alternate
Configuration specified under the TCP/IPv4 settings. This is on the same
network as the bridge and the access point. Not sure if this would make a
difference or not?

"Gerald" wrote:

> Hi
>
> Vista's TCP/IP stack has an ability to auto-tune the TCP/IP Window size - se
> > Windows Scaling.
> > Some routers and security appliances are not fully RFC 1323 compliant and
> > they cannot yet handle Vista's
> > stack.
> >
> > Go to a command prompt and open it as an administrator,
> >
> > Issue the following command and reboot your system, netsh int tcp set global
> > autotuninglevel=disabled
> >
> > ***Observe to ensure that the command shell returns an OK - to indicate the
> > command executed as desired.
> >
> > ****You may have to navigate to actually execute the command - e.g., to
> > netsh and then to interface and then
> > issue, the command.
> >
> > *****Do contact your appliance and or router vendor and advise them of the
> > SPI limitation and compliance issue
> > ref RFC 1323.

>
> "Andy1L" wrote:
>
> > Hi,
> > I just upgraded to Vista Business on my laptop and I can't get it to connect
> > to the internet using my Netgear Wireless Ethernet Bridge.
> >
> > The Network Identification process identifies the wired LAN and the wireless
> > network, tells me I'm connected to multiple networks and only grants me Local
> > access. I can connect to LAN devices on the other end of the bridge but it
> > won't connect outside of my subnet.
> >
> > I have an XP desktop machine that uses the same bridge to connect to the DSL
> > router downstairs and it works fine. The laptop also worked fine when it was
> > running XP.
> >
> > Any one got any ideas?

Reply With Quote
  #8 (permalink)  
Old 02-08-2008
Gerald
 

Posts: n/a
RE: Using a Wireless Ethernet bridge with Vista
Hi

Do u get the same error using wired and/or wireless connection to Netgear?

Try disabling IPv6 and setting static ip on IPv4.

Check the router firmware level.

Disable all firewalls and AV/Spyware temporarily.

I am using a Netgear DG834G Wireless and dont have any problems.


"Andy1L" wrote:

> Hi Gerald,
> Thanks very much for the suggestion. I've tried it and it still refuses to
> extend the connection from a "Local" to an "Internet".
>
> I don't have a DHCP server accessible to the laptop so I have an Alternate
> Configuration specified under the TCP/IPv4 settings. This is on the same
> network as the bridge and the access point. Not sure if this would make a
> difference or not?
>
> "Gerald" wrote:
>
> > Hi
> >
> > Vista's TCP/IP stack has an ability to auto-tune the TCP/IP Window size - se
> > > Windows Scaling.
> > > Some routers and security appliances are not fully RFC 1323 compliant and
> > > they cannot yet handle Vista's
> > > stack.
> > >
> > > Go to a command prompt and open it as an administrator,
> > >
> > > Issue the following command and reboot your system, netsh int tcp set global
> > > autotuninglevel=disabled
> > >
> > > ***Observe to ensure that the command shell returns an OK - to indicate the
> > > command executed as desired.
> > >
> > > ****You may have to navigate to actually execute the command - e.g., to
> > > netsh and then to interface and then
> > > issue, the command.
> > >
> > > *****Do contact your appliance and or router vendor and advise them of the
> > > SPI limitation and compliance issue
> > > ref RFC 1323.

> >
> > "Andy1L" wrote:
> >
> > > Hi,
> > > I just upgraded to Vista Business on my laptop and I can't get it to connect
> > > to the internet using my Netgear Wireless Ethernet Bridge.
> > >
> > > The Network Identification process identifies the wired LAN and the wireless
> > > network, tells me I'm connected to multiple networks and only grants me Local
> > > access. I can connect to LAN devices on the other end of the bridge but it
> > > won't connect outside of my subnet.
> > >
> > > I have an XP desktop machine that uses the same bridge to connect to the DSL
> > > router downstairs and it works fine. The laptop also worked fine when it was
> > > running XP.
> > >
> > > Any one got any ideas?

Reply With Quote
  #9 (permalink)  
Old 02-08-2008
Barb Bowman
 

Posts: n/a
Re: Using a Wireless Ethernet bridge with Vista
please unbind IPv6
http://digitalmediaphile.wordpress.c...windows-vista/

also please check to see that you have the latest driver for the
Intel wireless

let us know if this resolves your problem

On Fri, 8 Feb 2008 03:35:02 -0800, Andy1L
<Andy1L@discussions.microsoft.com> wrote:

>Hi Barb,
>The Netgear has the latest firmware on it and here's the ipconfig info:
>
>Microsoft Windows [Version 6.0.6000]
>Copyright (c) 2006 Microsoft Corporation. All rights reserved.
>
>C:\Users\w112507>ipconfig /all
>
>Windows IP Configuration
>
> Host Name . . . . . . . . . . . . : GBCWBWHLA7061
> Primary Dns Suffix . . . . . . . : energis.corp.energis.com
> Node Type . . . . . . . . . . . . : Hybrid
> IP Routing Enabled. . . . . . . . : No
> WINS Proxy Enabled. . . . . . . . : No
> DNS Suffix Search List. . . . . . : localnet
>
>Ethernet adapter Bluetooth Network Connection:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Bluetooth Device (Personal Area
>Network)
> Physical Address. . . . . . . . . : 00-1E-37-5B-F8-7D
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
>
>Wireless LAN adapter Wireless Network Connection:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network
>Con
>nection
> Physical Address. . . . . . . . . : 00-1C-BF-7B-F8-7F
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
> Link-local IPv6 Address . . . . . : fe80::1ca6:59c7:f30e:abfb%9(Preferred)
> IPv4 Address. . . . . . . . . . . : 172.16.0.10(Preferred)
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 172.16.0.1
> DHCPv6 IAID . . . . . . . . . . . : 151002303
> DNS Servers . . . . . . . . . . . : 212.159.13.50
> 212.159.13.49
> NetBIOS over Tcpip. . . . . . . . : Enabled
>
>Ethernet adapter Local Area Connection:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit
>Controlle
>r
> Physical Address. . . . . . . . . : 00-1C-23-21-32-21
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
>
>Tunnel adapter Local Area Connection* 9:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . :
>isatap.{A9623A01-6A6D-49E0-B5A2-AFB0803DF
>8AC}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> Link-local IPv6 Address . . . . . : fe80::5efe:172.16.0.10%19(Preferred)
> Default Gateway . . . . . . . . . :
> DNS Servers . . . . . . . . . . . : 212.159.13.50
> 212.159.13.49
> NetBIOS over Tcpip. . . . . . . . : Disabled
>
>Tunnel adapter Local Area Connection* 7:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . :
>isatap.{634D01AE-E18D-49F3-99FE-DEECDEEC8
>5F2}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
>Tunnel adapter Local Area Connection* 13:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . :
>isatap.{72313D8D-894A-4A68-BD9C-72D3F66FD
>8C4}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
>Tunnel adapter Local Area Connection* 10:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
> Physical Address. . . . . . . . . : 02-00-54-55-4E-01
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
>Tunnel adapter Local Area Connection* 17:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
>
>"Barb Bowman" wrote:
>
>> please post the text output of ipconfig /all
>>
>> http://digitalmediaphile.wordpress.c...t-text-output/
>>
>> does the netgear device have the latest firmware?
>>
>>
>>
>> On Fri, 8 Feb 2008 00:25:00 -0800, Andy1L
>> <Andy1L@discussions.microsoft.com> wrote:
>>
>> >Hi,
>> >I just upgraded to Vista Business on my laptop and I can't get it to connect
>> >to the internet using my Netgear Wireless Ethernet Bridge.
>> >
>> >The Network Identification process identifies the wired LAN and the wireless
>> >network, tells me I'm connected to multiple networks and only grants me Local
>> >access. I can connect to LAN devices on the other end of the bridge but it
>> >won't connect outside of my subnet.
>> >
>> >I have an XP desktop machine that uses the same bridge to connect to the DSL
>> >router downstairs and it works fine. The laptop also worked fine when it was
>> >running XP.
>> >
>> >Any one got any ideas?

>> --
>>
>> Barb Bowman
>> MS-MVP
>> http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
>> http://blogs.digitalmediaphile.com/barb/
>>

--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
Reply With Quote
  #10 (permalink)  
Old 02-08-2008
Tom Godzone
 

Posts: n/a
Re: Using a Wireless Ethernet bridge with Vista
Here you go -

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\tom>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Chignell-9200-P
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82566DC Gigabit Network
Connecti
on
Physical Address. . . . . . . . . : 00-19-D1-81-72-55
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::49c0:bc75:f8ee:5787%9(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, 9 February 2008 8:22:46 a.m.
Lease Expires . . . . . . . . . . : Sunday, 10 February 2008 8:22:46 a.m.
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 201333201
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 6:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . :
2001:0:4137:9e66:2460:f86:3f57:fefd(Prefe
rred)
Link-local IPv6 Address . . . . . : fe80::2460:f86:3f57:fefd%8(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 7:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . :
isatap.{E71EAD57-15AD-4F1D-A8EB-D4DC014ED
313}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.2%11(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\tom>

And yes, I do have the latest Netgear firmware for the WPN824v2.

Many thanks

Tom
--
Tom Godzone


"Barb Bowman" wrote:

> please post the text output of ipconfig /all
>
> http://digitalmediaphile.wordpress.c...t-text-output/
>
> does the netgear device have the latest firmware?
>
> On Fri, 8 Feb 2008 00:47:00 -0800, Tom Godzone
> <tomgodzone@discussions.microsoft.com> wrote:
>
> >Hi
> >I have similar problem with Vista (Ultimate), XP and Netgear. Both machines
> >connect fine to my broadband modem and the XP connects fine through the
> >Netgear WPN824v2. But when i connect the Vista machine either into the
> >Netgear (with or without the XP machine connected) the interconnect
> >connection on both machines appears to drop every 15-30 mins and takes 5 mins
> >to recover.
> >I have spent many hours on the Netgear support line but the best they could
> >do in the end was swap out the router. Unfortunately the new one has the
> >same problem. My previous Linksys router displayed similar behaviour.
> >Conclusion - there is something odd happening with Vista?
> >HELP too!
> >Tom

> --
>
> Barb Bowman
> MS-MVP
> http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
> http://blogs.digitalmediaphile.com/barb/
>

Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
ethernet problems in Windows Vista with wireless connection raymondvillain microsoft.public.windows.vista.general 18 12-06-2007 00:58
Ethernet and Wireless Together Phil microsoft.public.windows.vista.networking sharing 1 10-10-2007 04:39
Vista ics wireless wired bridge canalrun microsoft.public.windows.vista.networking sharing 1 09-24-2007 22:20
Vista/Win 2K Pro wireless & ethernet connection Dan microsoft.public.windows.vista.networking sharing 0 06-21-2007 21:54
Security World: ES520 Secure Wireless Access Bridge awarded with Wi-Fi Certification Steve Security News 0 04-11-2007 14:36




All times are GMT +1. The time now is 11:04.




Driver Scanner - Free Scan Now

Vistaheads.com is part of the Heads Network. See also XPHeads.com , Win7Heads.com and Win8Heads.com.


Design by Vjacheslav Trushkin for phpBBStyles.com.
Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 RC 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120