And yes, another can't reach DHCP.

::Hi Barb and everyone else! ::
::I have read a lot about this problem, forums and so on. I have the
same problem, I can’t reach my DHCP server, tired everything!
Unchecked ipv6, netsh reset reset / catalog… reinstalled vista
like 3 times, and the drivers the same thing. Disabled discovery and
enabled it again. ipconfig release,flushdns and renew... yeah.. tried
alot!::

::System: P5N-E Sli Asus motherboard, some say the nvidia chip, have a
build in firewall? ::
::Have a Linksys router, have the same setting as when I was running
xp, worked perfect. ::
::I have filled in as much as possible, what I have tried.::

::Microsoft Windows [Version 6.0.6000]::
::Copyright (c) 2006 Microsoft Corporation. All rights reserved.::

::C:\Windows\system32>ipconfig /all::

::Windows IP Configuration::

::Host Name . . . . . . . . . . . . : Dennis-PC::
::Primary Dns Suffix . . . . . . . :::
::Node Type . . . . . . . . . . . . : Hybrid::
::IP Routing Enabled. . . . . . . . : No::
::WINS Proxy Enabled. . . . . . . . : No::

::Ethernet adapter Local Area Connection:::

::Connection-specific DNS Suffix . :::
:escription . . . . . . . . . . . : NVIDIA nForce Networking
Controller::
::Physical Address. . . . . . . . . : 00-1B-FC-CF-FE-C2::
:HCP Enabled. . . . . . . . . . . : Yes::
::Autoconfiguration Enabled . . . . : Yes::
::Link-local IPv6 Address . . . . . :
fe80::f072:875c:3a95:e657%8(Preferred)::
::Autoconfiguration IPv4 Address. . : 169.254.230.87(Preferred)::
::Subnet Mask . . . . . . . . . . . : 255.255.0.0::
:efault Gateway . . . . . . . . . :::
:HCPv6 IAID . . . . . . . . . . . : 167779324::
:NS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1::
::fec0:0:0:ffff::2%1::
::fec0:0:0:ffff::3%1::
::NetBIOS over Tcpip. . . . . . . . : Enabled::

::Tunnel adapter Local Area Connection* 6:::

::Connection-specific DNS Suffix . :::
:escription . . . . . . . . . . . :
isatap.{7D67A48B-93F0-496D-8511-4719CE01B::
::CCB}::
::Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0::
:HCP Enabled. . . . . . . . . . . : No::
::Autoconfiguration Enabled . . . . : Yes::
::Link-local IPv6 Address . . . . . :
fe80::5efe:169.254.230.87%9(Preferred)::
:efault Gateway . . . . . . . . . :::
:NS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1::
::fec0:0:0:ffff::2%1::
::fec0:0:0:ffff::3%1::
::NetBIOS over Tcpip. . . . . . . . : Disabled::

::C:\Windows\system32> ::

:o you have the million dollar question? ::
Best Regards Dennis / Denmark


--
WuggyBuggy

your message is very hard to read. I can't tell whether the ipconfig
below is yours or someone else's.

Have you upgraded the firmware on your router? Which hardware
version, model, firmware version is your router? have you tried
disabling ipV6? Have you tried this fix:
http://support.microsoft.com/default...b/928233/en-us ?

On Tue, 2 Oct 2007 09:57:17 -0500, WuggyBuggy
<WuggyBuggy.2xu024@no-mx.forums.net> wrote:

>
>::Hi Barb and everyone else! ::
>::I have read a lot about this problem, forums and so on. I have the
>same problem, I can’t reach my DHCP server, tired everything!
>Unchecked ipv6, netsh reset reset / catalog… reinstalled vista
>like 3 times, and the drivers the same thing. Disabled discovery and
>enabled it again. ipconfig release,flushdns and renew... yeah.. tried
>alot!::
>
>::System: P5N-E Sli Asus motherboard, some say the nvidia chip, have a
>build in firewall? ::
>::Have a Linksys router, have the same setting as when I was running
>xp, worked perfect. ::
>::I have filled in as much as possible, what I have tried.::
>
>::Microsoft Windows [Version 6.0.6000]::
>::Copyright (c) 2006 Microsoft Corporation. All rights reserved.::
>
>::C:\Windows\system32>ipconfig /all::
>
>::Windows IP Configuration::
>
>::Host Name . . . . . . . . . . . . : Dennis-PC::
>::Primary Dns Suffix . . . . . . . :::
>::Node Type . . . . . . . . . . . . : Hybrid::
>::IP Routing Enabled. . . . . . . . : No::
>::WINS Proxy Enabled. . . . . . . . : No::
>
>::Ethernet adapter Local Area Connection:::
>
>::Connection-specific DNS Suffix . :::
>:escription . . . . . . . . . . . : NVIDIA nForce Networking
>Controller::
>::Physical Address. . . . . . . . . : 00-1B-FC-CF-FE-C2::
>:HCP Enabled. . . . . . . . . . . : Yes::
>::Autoconfiguration Enabled . . . . : Yes::
>::Link-local IPv6 Address . . . . . :
>fe80::f072:875c:3a95:e657%8(Preferred)::
>::Autoconfiguration IPv4 Address. . : 169.254.230.87(Preferred)::
>::Subnet Mask . . . . . . . . . . . : 255.255.0.0::
>:efault Gateway . . . . . . . . . :::
>:HCPv6 IAID . . . . . . . . . . . : 167779324::
>:NS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1::
>::fec0:0:0:ffff::2%1::
>::fec0:0:0:ffff::3%1::
>::NetBIOS over Tcpip. . . . . . . . : Enabled::
>
>::Tunnel adapter Local Area Connection* 6:::
>
>::Connection-specific DNS Suffix . :::
>:escription . . . . . . . . . . . :
>isatap.{7D67A48B-93F0-496D-8511-4719CE01B::
>::CCB}::
>::Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0::
>:HCP Enabled. . . . . . . . . . . : No::
>::Autoconfiguration Enabled . . . . : Yes::
>::Link-local IPv6 Address . . . . . :
>fe80::5efe:169.254.230.87%9(Preferred)::
>:efault Gateway . . . . . . . . . :::
>:NS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1::
>::fec0:0:0:ffff::2%1::
>::fec0:0:0:ffff::3%1::
>::NetBIOS over Tcpip. . . . . . . . : Disabled::
>
>::C:\Windows\system32> ::
>
>:o you have the million dollar question? ::
>Best Regards Dennis / Denmark
--

Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/

First, you need to make sure you enable DHCP on router/DHCP server.

If you use wired connection, then might try to change the network cable.
Ensure network adapter driver is installed correctly also.

Ping 127.0.0.1, should get reply if the network adapter is working well.

Hope helps..


picoHat
http://www.home-network-help.com

Sorry about that.

Yes I did try the regedit fix, didn't do any improvement. The ipconfig
/all is mine.

My firmware on the router is the newest. The model is a WRT54G Linksys,
V5


--
WuggyBuggy

picoHat;469505 Wrote:
> First, you need to make sure you enable DHCP on router/DHCP server.
>
> If you use wired connection, then might try to change the network
> cable.
> Ensure network adapter driver is installed correctly also.
>
> Ping 127.0.0.1, should get reply if the network adapter is working
> well.
>
> Hope helps..
>
>
> picoHat
> 'Home Network, Wireless Network and Computer Networking Made Easy'
> (http://www.home-network-help.com)

Yeah the DHCP is up and running... it gives my laptop a ip :/ The
127.0.0.1 works but when i ping my router i get :

PING: transmit failed, error code 1231

PING: transmit failed, error code 1231

PING: transmit failed, error code 1231

PING: transmit failed, error code 1231


--
WuggyBuggy

1. Click on Start button.
2. Type Cmd in the Start Search text box.
3. Press Ctrl-Shift-Enter keyboard shortcut to run Command Prompt as
Administrator. Allow the elevation request.
4. Type
netsh int ip reset
in the cmd windowsl, and then press the Enter key.
5. Restart the computer.


Also, please reset your router to factory defaults (there is
usually a reset button or hole you hold in). Reboot the computer.
Power cycle the router. Does anything change?

On Tue, 2 Oct 2007 10:42:30 -0500, WuggyBuggy
<WuggyBuggy.2xu250@no-mx.forums.net> wrote:

>
>Sorry about that.
>
>Yes I did try the regedit fix, didn't do any improvement. The ipconfig
>/all is mine.
>
>My firmware on the router is the newest. The model is a WRT54G Linksys,
>V5
--

Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/

HAI
Guys i am using VISTA.i am using the DSL connection.It was
working fine all at sudden i lost the connection.when i typer IPCONFIG i
got "Media state disconnected".Tried everything to resolve stil the
same.If anyone help on this.....


--
sulap

On Sat, 15 Mar 2008 15:48:34 -0500, sulap
<sulap.36c0q4@no-mx.forums.net> wrote:

>HAI
>Guys i am using VISTA.i am using the DSL connection.It was
>working fine all at sudden i lost the connection.when i typer IPCONFIG i
>got "Media state disconnected".Tried everything to resolve stil the
>same.If anyone help on this.....

"Media state disconnected" means that the computer isn't physically
connected to a network. Check the cable to the DSL modem, and make
sure that the DSL modem is turned on.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com

WuggyBuggy;469453 Wrote:
> ::Hi Barb and everyone else! ::
> ::I have read a lot about this problem, forums and so on. I have the
> same problem, I can’t reach my DHCP server, tired everything! Unchecked
> ipv6, netsh reset reset / catalog… reinstalled vista like 3 times, and
> the drivers the same thing. Disabled discovery and enabled it again.
> ipconfig release,flushdns and renew... yeah.. tried alot!::
>
> ::System: P5N-E Sli Asus motherboard, some say the nvidia chip, have a
> build in firewall? ::
> ::Have a Linksys router, have the same setting as when I was running
> xp, worked perfect. ::
> ::I have filled in as much as possible, what I have tried.::
>
> ::Microsoft Windows [Version 6.0.6000]::
> ::Copyright (c) 2006 Microsoft Corporation. All rights reserved.::
>
> ::C:\Windows\system32>ipconfig /all::
>
> ::Windows IP Configuration::
>
> ::Host Name . . . . . . . . . . . . : Dennis-PC::
> ::Primary Dns Suffix . . . . . . . :::
> ::Node Type . . . . . . . . . . . . : Hybrid::
> ::IP Routing Enabled. . . . . . . . : No::
> ::WINS Proxy Enabled. . . . . . . . : No::
>
> ::Ethernet adapter Local Area Connection:::
>
> ::Connection-specific DNS Suffix . :::
> :escription . . . . . . . . . . . : NVIDIA nForce Networking
> Controller::
> ::Physical Address. . . . . . . . . : 00-1B-FC-CF-FE-C2::
> :HCP Enabled. . . . . . . . . . . : Yes::
> ::Autoconfiguration Enabled . . . . : Yes::
> ::Link-local IPv6 Address . . . . . :
> fe80::f072:875c:3a95:e657%8(Preferred)::
> ::Autoconfiguration IPv4 Address. . : 169.254.230.87(Preferred)::
> ::Subnet Mask . . . . . . . . . . . : 255.255.0.0::
> :efault Gateway . . . . . . . . . :::
> :HCPv6 IAID . . . . . . . . . . . : 167779324::
> :NS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1::
> ::fec0:0:0:ffff::2%1::
> ::fec0:0:0:ffff::3%1::
> ::NetBIOS over Tcpip. . . . . . . . : Enabled::
>
> ::Tunnel adapter Local Area Connection* 6:::
>
> ::Connection-specific DNS Suffix . :::
> :escription . . . . . . . . . . . :
> isatap.{7D67A48B-93F0-496D-8511-4719CE01B::
> ::CCB}::
> ::Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0::
> :HCP Enabled. . . . . . . . . . . : No::
> ::Autoconfiguration Enabled . . . . : Yes::
> ::Link-local IPv6 Address . . . . . :
> fe80::5efe:169.254.230.87%9(Preferred)::
> :efault Gateway . . . . . . . . . :::
> :NS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1::
> ::fec0:0:0:ffff::2%1::
> ::fec0:0:0:ffff::3%1::
> ::NetBIOS over Tcpip. . . . . . . . : Disabled::
>
> ::C:\Windows\system32> ::
>
> :o you have the million dollar question? Would it be easyere to
> buy another netcontroller and put in my box?::
> Best Regards Dennis / Denmark


I know this has been a while... but I have an extremely similar
motherboard with the same problem - I recieve a 169.254.x.x (I can ping
127.0.0.1 but not router). I have also been searching for 2 days now and
have tried repairing a corrupt TCP/IP stack, disabling IPv6, setting
static IP, setting speed/duplex setting slower, system restore to before
the problem existed, restarting DHCP service, adding registry DWORD32 to
DhcpEnableSomething. I am using an Asus P5N32E-SLI with nforce
networking controller which I have seen in a few posts with this
issue... I have downloaded updated drivers and old drivers neither which
of them have any effect on the problem. the router has enough addresses
and has other machines on it that are fine, I have tested the cable on
laptop which works fine gets DHCP ip... The lights on the back are green
like they are connected.

The strange thing is.. It has worked perfectly for over a year and
nothing changed on the system (no microsoft updates, in the previous
week the only new install was an iTunes update which I uninstalled). I
have really searched and will continue but this post is the most similar
I have found to my problem and was hoping there was some resolution to
it.

Oh, I am using Vista Ultimate x64 SP1

There has to be a fix somewhere for this


--
pleasuretek

Hi
Take a look at this.
http://support.microsoft.com/kb/928233
Jack (MS, MVP-Networking)

"pleasuretek" <guest@unknown-email.com> wrote in message
news:f817dae24c035d49946b8fcc6f51023b@nntp-gateway.com...
>
> WuggyBuggy;469453 Wrote:
>> ::Hi Barb and everyone else! ::
>> ::I have read a lot about this problem, forums and so on. I have the
>> same problem, I can’t reach my DHCP server, tired everything! Unchecked
>> ipv6, netsh reset reset / catalog… reinstalled vista like 3 times, and
>> the drivers the same thing. Disabled discovery and enabled it again.
>> ipconfig release,flushdns and renew... yeah.. tried alot!::
>>
>> ::System: P5N-E Sli Asus motherboard, some say the nvidia chip, have a
>> build in firewall? ::
>> ::Have a Linksys router, have the same setting as when I was running
>> xp, worked perfect. ::
>> ::I have filled in as much as possible, what I have tried.::
>>
>> ::Microsoft Windows [Version 6.0.6000]::
>> ::Copyright (c) 2006 Microsoft Corporation. All rights reserved.::
>>
>> ::C:\Windows\system32>ipconfig /all::
>>
>> ::Windows IP Configuration::
>>
>> ::Host Name . . . . . . . . . . . . : Dennis-PC::
>> ::Primary Dns Suffix . . . . . . . :::
>> ::Node Type . . . . . . . . . . . . : Hybrid::
>> ::IP Routing Enabled. . . . . . . . : No::
>> ::WINS Proxy Enabled. . . . . . . . : No::
>>
>> ::Ethernet adapter Local Area Connection:::
>>
>> ::Connection-specific DNS Suffix . :::
>> :escription . . . . . . . . . . . : NVIDIA nForce Networking
>> Controller::
>> ::Physical Address. . . . . . . . . : 00-1B-FC-CF-FE-C2::
>> :HCP Enabled. . . . . . . . . . . : Yes::
>> ::Autoconfiguration Enabled . . . . : Yes::
>> ::Link-local IPv6 Address . . . . . :
>> fe80::f072:875c:3a95:e657%8(Preferred)::
>> ::Autoconfiguration IPv4 Address. . : 169.254.230.87(Preferred)::
>> ::Subnet Mask . . . . . . . . . . . : 255.255.0.0::
>> :efault Gateway . . . . . . . . . :::
>> :HCPv6 IAID . . . . . . . . . . . : 167779324::
>> :NS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1::
>> ::fec0:0:0:ffff::2%1::
>> ::fec0:0:0:ffff::3%1::
>> ::NetBIOS over Tcpip. . . . . . . . : Enabled::
>>
>> ::Tunnel adapter Local Area Connection* 6:::
>>
>> ::Connection-specific DNS Suffix . :::
>> :escription . . . . . . . . . . . :
>> isatap.{7D67A48B-93F0-496D-8511-4719CE01B::
>> ::CCB}::
>> ::Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0::
>> :HCP Enabled. . . . . . . . . . . : No::
>> ::Autoconfiguration Enabled . . . . : Yes::
>> ::Link-local IPv6 Address . . . . . :
>> fe80::5efe:169.254.230.87%9(Preferred)::
>> :efault Gateway . . . . . . . . . :::
>> :NS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1::
>> ::fec0:0:0:ffff::2%1::
>> ::fec0:0:0:ffff::3%1::
>> ::NetBIOS over Tcpip. . . . . . . . : Disabled::
>>
>> ::C:\Windows\system32> ::
>>
>> :o you have the million dollar question? Would it be easyere to
>> buy another netcontroller and put in my box?::
>> Best Regards Dennis / Denmark
>
>
> I know this has been a while... but I have an extremely similar
> motherboard with the same problem - I recieve a 169.254.x.x (I can ping
> 127.0.0.1 but not router). I have also been searching for 2 days now and
> have tried repairing a corrupt TCP/IP stack, disabling IPv6, setting
> static IP, setting speed/duplex setting slower, system restore to before
> the problem existed, restarting DHCP service, adding registry DWORD32 to
> DhcpEnableSomething. I am using an Asus P5N32E-SLI with nforce
> networking controller which I have seen in a few posts with this
> issue... I have downloaded updated drivers and old drivers neither which
> of them have any effect on the problem. the router has enough addresses
> and has other machines on it that are fine, I have tested the cable on
> laptop which works fine gets DHCP ip... The lights on the back are green
> like they are connected.
>
> The strange thing is.. It has worked perfectly for over a year and
> nothing changed on the system (no microsoft updates, in the previous
> week the only new install was an iTunes update which I uninstalled). I
> have really searched and will continue but this post is the most similar
> I have found to my problem and was hoping there was some resolution to
> it.
>
> Oh, I am using Vista Ultimate x64 SP1
>
> There has to be a fix somewhere for this
>
>
> --
> pleasuretek