Having problems setting up POP with Windows Mail and Yahoo Mail Pl

The following are the messages that I recieve:

The connection to the server has failed. Subject 'again', Account: 'yahoo
mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, Secure(SSL):
Yes, Socket Error: 10061, Error Number: 0x800CCC0E

The connection to the server has failed. Account: 'yahoo mail', Server:
'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket
Error: 10061, Error Number: 0x800CCC0E

I have yahoo mail plus. I have enabled to use POP through yahoo mail plus.
I followed the directions and I haven't been able to send or recieve and
email. I was hoping that someone might could figure out what I have done
incorrectly. Thanks so much.

Laurie

Your settings look correct to me, so it is a mystery why nothing is working.
There are a few circumstances where the SSL option is not compatible,
so try this: on the Advanced tab of the account properties, unselect SSL,
then change the receiving port to 110, and the sending port to 587.

--
Gary VanderMolen [MS-MVP WLM]


"Laurie" <Laurie@discussions.microsoft.com> wrote in message news:72E994A7-1CE7-4F1D-BE19-DEB7931693C0@microsoft.com...
> The following are the messages that I recieve:
>
> The connection to the server has failed. Subject 'again', Account: 'yahoo
> mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, Secure(SSL):
> Yes, Socket Error: 10061, Error Number: 0x800CCC0E
>
> The connection to the server has failed. Account: 'yahoo mail', Server:
> 'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket
> Error: 10061, Error Number: 0x800CCC0E
>
> I have yahoo mail plus. I have enabled to use POP through yahoo mail plus.
> I followed the directions and I haven't been able to send or recieve and
> email. I was hoping that someone might could figure out what I have done
> incorrectly. Thanks so much.
>
> Laurie

Are those the correct server names? It seems to be rejecting the sever
name itself. Have you tried mail.yahoo.com or just pop.yahoo.com? Give
that a try and see if that works.

--
Dustin Harper
dharper@vistarip.com
http://www.vistarip.com


Laurie wrote:
> The following are the messages that I recieve:
>
> The connection to the server has failed. Subject 'again', Account: 'yahoo
> mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, Secure(SSL):
> Yes, Socket Error: 10061, Error Number: 0x800CCC0E
>
> The connection to the server has failed. Account: 'yahoo mail', Server:
> 'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket
> Error: 10061, Error Number: 0x800CCC0E
>
> I have yahoo mail plus. I have enabled to use POP through yahoo mail plus.
> I followed the directions and I haven't been able to send or recieve and
> email. I was hoping that someone might could figure out what I have done
> incorrectly. Thanks so much.
>
> Laurie

Gary-

I unselected the SSL options on both the POP3 and the SMTP and changed the
ports to 110 and 587 respectively and these are the errors now given:

The connection to the server has failed. Subject 'again', Account: 'yahoo
mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 110, Secure(SSL):
Yes, Socket Error: 10061, Error Number: 0x800CCC0E

The connection to the server has failed. Account: 'yahoo mail', Server:
'pop.mail.yahoo.com', Protocol: POP3, Port: 587, Secure(SSL): Yes, Socket
Error: 10061, Error Number: 0x800CCC0E

Thanks so much for your help.

"Gary VanderMolen" wrote:

> Your settings look correct to me, so it is a mystery why nothing is working.
> There are a few circumstances where the SSL option is not compatible,
> so try this: on the Advanced tab of the account properties, unselect SSL,
> then change the receiving port to 110, and the sending port to 587.
>
> --
> Gary VanderMolen [MS-MVP WLM]
>
>
> "Laurie" <Laurie@discussions.microsoft.com> wrote in message news:72E994A7-1CE7-4F1D-BE19-DEB7931693C0@microsoft.com...
> > The following are the messages that I recieve:
> >
> > The connection to the server has failed. Subject 'again', Account: 'yahoo
> > mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, Secure(SSL):
> > Yes, Socket Error: 10061, Error Number: 0x800CCC0E
> >
> > The connection to the server has failed. Account: 'yahoo mail', Server:
> > 'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket
> > Error: 10061, Error Number: 0x800CCC0E
> >
> > I have yahoo mail plus. I have enabled to use POP through yahoo mail plus.
> > I followed the directions and I haven't been able to send or recieve and
> > email. I was hoping that someone might could figure out what I have done
> > incorrectly. Thanks so much.
> >
> > Laurie
>

You got the port numbers backwards.

"Laurie" <Laurie@discussions.microsoft.com> wrote in message
news:1CDCA235-86DA-4E52-9A0C-0BB308263C9E@microsoft.com...
>
> I unselected the SSL options on both the POP3 and the SMTP and changed the
> ports to 110 and 587 respectively and these are the errors now given:
>
> The connection to the server has failed. Subject 'again', Account: 'yahoo
> mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 110,
> Secure(SSL):
> Yes, Socket Error: 10061, Error Number: 0x800CCC0E
>
> The connection to the server has failed. Account: 'yahoo mail', Server:
> 'pop.mail.yahoo.com', Protocol: POP3, Port: 587, Secure(SSL): Yes, Socket
> Error: 10061, Error Number: 0x800CCC0E
>
> Thanks so much for your help.
>
> "Gary VanderMolen" wrote:
>
>> Your settings look correct to me, so it is a mystery why nothing is
>> working.
>> There are a few circumstances where the SSL option is not compatible,
>> so try this: on the Advanced tab of the account properties, unselect SSL,
>> then change the receiving port to 110, and the sending port to 587.
>>
>> "Laurie" <Laurie@discussions.microsoft.com> wrote in message
>> news:72E994A7-1CE7-4F1D-BE19-DEB7931693C0@microsoft.com...
>> > The following are the messages that I recieve:
>> >
>> > The connection to the server has failed. Subject 'again', Account:
>> > 'yahoo
>> > mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465,
>> > Secure(SSL):
>> > Yes, Socket Error: 10061, Error Number: 0x800CCC0E
>> >
>> > The connection to the server has failed. Account: 'yahoo mail', Server:
>> > 'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes,
>> > Socket
>> > Error: 10061, Error Number: 0x800CCC0E
>> >
>> > I have yahoo mail plus. I have enabled to use POP through yahoo mail
>> > plus.
>> > I followed the directions and I haven't been able to send or recieve
>> > and
>> > email. I was hoping that someone might could figure out what I have
>> > done
>> > incorrectly. Thanks so much.

The server names are correct for Yahoo Mail Plus users, see
http://help.yahoo.com/l/us/yahoo/mai...op/pop-08.html

--
Gary VanderMolen [MS-MVP WLM]


"Dustin Harper" <dharper@vistarip.com> wrote in message news:%23rAzr5JKIHA.1208@TK2MSFTNGP05.phx.gbl...
> Are those the correct server names? It seems to be rejecting the sever
> name itself. Have you tried mail.yahoo.com or just pop.yahoo.com? Give
> that a try and see if that works.
>
> --
> Dustin Harper
> dharper@vistarip.com
> http://www.vistarip.com
>
>
> Laurie wrote:
>> The following are the messages that I recieve:
>>
>> The connection to the server has failed. Subject 'again', Account: 'yahoo
>> mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, Secure(SSL):
>> Yes, Socket Error: 10061, Error Number: 0x800CCC0E
>>
>> The connection to the server has failed. Account: 'yahoo mail', Server:
>> 'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket
>> Error: 10061, Error Number: 0x800CCC0E
>>
>> I have yahoo mail plus. I have enabled to use POP through yahoo mail plus.
>> I followed the directions and I haven't been able to send or recieve and
>> email. I was hoping that someone might could figure out what I have done
>> incorrectly. Thanks so much.
>>
>> Laurie

You messed up on a couple of things. You swapped the port numbers.
The incoming (POP3) server should be Port 110. The outgoing
(SMTP) server should be Port 587. Also, the error message still shows
that SSL is still enabled, which should have been unselected for both.

--
Gary VanderMolen [MS-MVP WLM]


"Laurie" <Laurie@discussions.microsoft.com> wrote in message news:1CDCA235-86DA-4E52-9A0C-0BB308263C9E@microsoft.com...
> Gary-
>
> I unselected the SSL options on both the POP3 and the SMTP and changed the
> ports to 110 and 587 respectively and these are the errors now given:
>
> The connection to the server has failed. Subject 'again', Account: 'yahoo
> mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 110, Secure(SSL):
> Yes, Socket Error: 10061, Error Number: 0x800CCC0E
>
> The connection to the server has failed. Account: 'yahoo mail', Server:
> 'pop.mail.yahoo.com', Protocol: POP3, Port: 587, Secure(SSL): Yes, Socket
> Error: 10061, Error Number: 0x800CCC0E
>
> Thanks so much for your help.
>
> "Gary VanderMolen" wrote:
>
>> Your settings look correct to me, so it is a mystery why nothing is working.
>> There are a few circumstances where the SSL option is not compatible,
>> so try this: on the Advanced tab of the account properties, unselect SSL,
>> then change the receiving port to 110, and the sending port to 587.
>>
>> --
>> Gary VanderMolen [MS-MVP WLM]
>>
>>
>> "Laurie" <Laurie@discussions.microsoft.com> wrote in message news:72E994A7-1CE7-4F1D-BE19-DEB7931693C0@microsoft.com...
>> > The following are the messages that I recieve:
>> >
>> > The connection to the server has failed. Subject 'again', Account: 'yahoo
>> > mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, Secure(SSL):
>> > Yes, Socket Error: 10061, Error Number: 0x800CCC0E
>> >
>> > The connection to the server has failed. Account: 'yahoo mail', Server:
>> > 'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket
>> > Error: 10061, Error Number: 0x800CCC0E
>> >
>> > I have yahoo mail plus. I have enabled to use POP through yahoo mail plus.
>> > I followed the directions and I haven't been able to send or recieve and
>> > email. I was hoping that someone might could figure out what I have done
>> > incorrectly. Thanks so much.
>> >
>> > Laurie
>>

How do I change incoming mail from POP to POP3 and outgoing mail from SMPT to
something?

"Laurie" wrote:

> The following are the messages that I recieve:
>
> The connection to the server has failed. Subject 'again', Account: 'yahoo
> mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, Secure(SSL):
> Yes, Socket Error: 10061, Error Number: 0x800CCC0E
>
> The connection to the server has failed. Account: 'yahoo mail', Server:
> 'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket
> Error: 10061, Error Number: 0x800CCC0E
>
> I have yahoo mail plus. I have enabled to use POP through yahoo mail plus.
> I followed the directions and I haven't been able to send or recieve and
> email. I was hoping that someone might could figure out what I have done
> incorrectly. Thanks so much.
>
> Laurie

'Tools|Accounts|Mail|Properties|Servers tab'. POP and POP3 are the same
animal in this case and what do you want to change SMTP to?

Hal
--
Hal Hostetler, CPBE -- hhh@kvoa.com
Senior Engineer/MIS -- MS MVP-Print/Imaging -- WA7BGX
http://www.kvoa.com -- "When News breaks, we fix it!"
KVOA Television, Tucson, AZ. NBC Channel 4
Live at Hot Licks - www.badnewsbluesband.com

"Lynette Eaker" <Lynette Eaker@discussions.microsoft.com> wrote in message
news6919A0C-F493-4D76-B483-B893B52C32AF@microsoft.com...
> How do I change incoming mail from POP to POP3 and outgoing mail from SMPT
to
> something?
>
> "Laurie" wrote:
>
> > The following are the messages that I recieve:
> >
> > The connection to the server has failed. Subject 'again', Account:
'yahoo
> > mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465,
Secure(SSL):
> > Yes, Socket Error: 10061, Error Number: 0x800CCC0E
> >
> > The connection to the server has failed. Account: 'yahoo mail', Server:
> > 'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes,
Socket
> > Error: 10061, Error Number: 0x800CCC0E
> >
> > I have yahoo mail plus. I have enabled to use POP through yahoo mail
plus.
> > I followed the directions and I haven't been able to send or recieve and
> > email. I was hoping that someone might could figure out what I have
done
> > incorrectly. Thanks so much.
> >
> > Laurie

First you need to find out what your server names are........
Then go to Tools - Accounts - (youraccount) - Properties - Servers


--
http://get.live.com/wlmail/overview


"Lynette Eaker" <Lynette Eaker@discussions.microsoft.com> wrote in message
news6919A0C-F493-4D76-B483-B893B52C32AF@microsoft.com...
> How do I change incoming mail from POP to POP3 and outgoing mail from SMPT
> to
> something?
>
> "Laurie" wrote:
>
>> The following are the messages that I recieve:
>>
>> The connection to the server has failed. Subject 'again', Account: 'yahoo
>> mail', Server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465,
>> Secure(SSL):
>> Yes, Socket Error: 10061, Error Number: 0x800CCC0E
>>
>> The connection to the server has failed. Account: 'yahoo mail', Server:
>> 'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket
>> Error: 10061, Error Number: 0x800CCC0E
>>
>> I have yahoo mail plus. I have enabled to use POP through yahoo mail
>> plus.
>> I followed the directions and I haven't been able to send or recieve and
>> email. I was hoping that someone might could figure out what I have done
>> incorrectly. Thanks so much.
>>
>> Laurie