Disk to Disk Image

Today I installed Windows Vista Ultimate on my workstation, and use GHOST83
backuped the system, as the follow steps,
1. Connect 3 SATA HDDs on SATA port0, port1 and port2;
2. Create a RAID1 volume with SATA0 and SATA1 in RAID BIOS;
3. Install Windows Vista via Microsoft resource DVD on RAID 1 volume;
4. Format the entire HDD on SATA port2 for NTFS under OS;
5. Boot to DOS and launch GHOST83;
6. Run Disk-to-Disk image to backup the system disk on other disk;
7. Reboot system after it done;
8. Shutdown the system during it POST;
9. Remove the RAID1 volume;
10. Power on system and try to boot from the copy HDD;
11. But it failed and show "Windows boot manager";
12. Boot from the RAID1 volume again and found that the file size on
resource HDD and the copy HDD is the same;
The copy HDD is not bootable. I am confused. Who can give me some suggestions?

is the disk marked active if so try booting from the vista dvd and do
fix boot might solve your problem i had a similar problem going from
single drive images to a raid drive would boot from raid drive as long
as i kept the old drive installed i think it had to do with the drive
numbering ie 0 1 for some reason the raid by itself was still being
installed as 1 and not 0
in the end i just reinstalled xp 32 vista 32 and vista 64 then done
backups on the raid and now i can replace the images from any partion
without problems i have kept the old single drive image to see if i
can get it to work some rainy day when im bored


--
chinga69

CHEERS CHINGA69