Vista x64 install SATA/AHCI signed driver problem

Hi guys,

I'm having problems trying to install Vista x64 Ultimate on my G33
Express machine, which utilizes the ICH9 controller for the SATA/AHCI
capabilities. I've got a single WD Raptor 74GB connected to port 1, and
am trying to install Vista x64 in either SATA or AHCI modes.

Scenario 1: SATA x64

When I attempt to install x64, it will notify me that no drives are
found. I opt to load drivers, and try to provide Intel's Matrix Storage
Manager v8.7.0.1007 files, v7.8, or even the x64-floppy, but they don't
seem to provide SATA drivers for x64.

Scenario 2: AHCI x64

When I try to set BIOS to AHCI mode instead and restart the Vista
install process, this time I'm confronted by a message that indicates
that unsigned drivers are not supported in x64 and kicks me out.

Scenario 3: SATA x32

When I try x32 install instead, Vista still doesn't find any compatible
Intel drivers, and no drives are found.

Scenario 4: AHCI x32

Vista will accept the SATA driver provided by Intel, but still no
drives are found. The Raptor does not have any problems being detected
in BIOS.

Starting to run out of ideas...any help would be appreciated, thanks!

li Arc


--
li Arc

What motherboard do you have?

On Wed, 4 Mar 2009 19:16:40 -0600, li Arc <guest@unknown-email.com>
wrote:

>
>Hi guys,
>
>I'm having problems trying to install Vista x64 Ultimate on my G33
>Express machine, which utilizes the ICH9 controller for the SATA/AHCI
>capabilities. I've got a single WD Raptor 74GB connected to port 1, and
>am trying to install Vista x64 in either SATA or AHCI modes.
>
>Scenario 1: SATA x64
>
>When I attempt to install x64, it will notify me that no drives are
>found. I opt to load drivers, and try to provide Intel's Matrix Storage
>Manager v8.7.0.1007 files, v7.8, or even the x64-floppy, but they don't
>seem to provide SATA drivers for x64.
>
>Scenario 2: AHCI x64
>
>When I try to set BIOS to AHCI mode instead and restart the Vista
>install process, this time I'm confronted by a message that indicates
>that unsigned drivers are not supported in x64 and kicks me out.
>
>Scenario 3: SATA x32
>
>When I try x32 install instead, Vista still doesn't find any compatible
>Intel drivers, and no drives are found.
>
>Scenario 4: AHCI x32
>
>Vista will accept the SATA driver provided by Intel, but still no
>drives are found. The Raptor does not have any problems being detected
>in BIOS.
>
>Starting to run out of ideas...any help would be appreciated, thanks!
>
>li Arc