
05-26-2008
|
|
|
|
Re: RAID 1 after first drive Installation
with a mirror drive you can "usually" instal the second drive, correctly
amend any bios settings then reboot & enter the raid config utility to build
the array (this only applies to a mirror array)
NB I've not checked your mobo manual but on some, certain sata connectors
have to be used, I assume also that your raid controler is by default
supported in Vista & you dont have to use the F6 option to install third
party (raid controler) drivers in either a clean or repair instalation.
"newbie" <newbie@discussions.microsoft.com> wrote in message
news:EB5C36DE-99FC-4200-8437-61DEEDEF6B65@microsoft.com...
> mobo supports RAID - standard instruction is to install and RAID drives
> before OS install.
>
> "DL" wrote:
>
>> If your mobo supports raid
>> Read the mobo manual, available from Asus if you dont have it
>>
>> "newbie" <newbie@discussions.microsoft.com> wrote in message
>> news:F742DE62-ED53-4135-92B9-0FC5B73A30C5@microsoft.com...
>> >I mean "RAID 1" after first drive install.
>> >
>> > "newbie" wrote:
>> >
>> >> MB P5DWH; Vista Ultimate; Hitachi DeskStar 300 GB.
>> >>
>> >> ANyone knows if its posible to "raid 2" on an Intel motherboard after
>> >> clean
>> >> installof Vistal Ultimate?
>>
>>
>>
|