Vista entering reduced functionality mode without warning

I received a free copy of Vista Business through the "Power of Together"
promotion.

As I'm currently evaluating whether or not Vista is going to fit my needs I
haven't yet activated the copy. I'm currently try to find a permanent
solution to an issue where Vista appears to go into something that I can only
describe as partial reduced functionality mode after every reboot. The
control panel in the start menu shows as empty, attempting to open the
control panel causes the window to appear briefly and then close. Other
features like the Windows Welcome Center show similar behavior either not
opening at all (with the mouse cursor switching to the circular activity
animation) or the window opening and the closing immediately.

I spent many hours troubleshooting thinking this was potentially a
hardware/driver issue until I eventually discovered people complaining of the
same issue and that what I was facing was in fact Vista going into reduced
functionality mode without telling me. The current work-around for the issue
is stopping and restarting the Software License service after a reboot but
obviously that isn't a permanent solution.

I've reinstalled Vista several times and I can't isolate anything in
particular that would be causing this issue. Does anyone have any
suggestions on how to resolve this?

Regards,

Shelby Cain

Shelby--

There are ways to renew the 30 day period, but I suspect you're beyond that.
We've posted them many times on this and the general group. Your post isn't
clear and I'll tell you why.

You say you have a legit Vista sitting on the shelf you acquired from the PT
offer. You obviously are complaining about a Vista setup on that box that
has gone into reduced functionality mode and ironically, you're trying to
evaluate whether to use the Power Together Vista that is legit by using
what?

Vista what edition from where Shelby? You ID it as "I'm currently try to
find a permanent
> solution to an issue where Vista appears to go into something that I can
> only
> describe as partial reduced functionality mode after every reboot:

So if that is an issue for you, it has to do with what you have on the box
and what product key you put in or how you activated it.

To me this doesn't make sense. You have a non-working Vista on the box that
you think is in reduced functionality mode (meaning you can do next to
nothing with it). Why not put in that PT Biz and format and install it.
Evaluate Vista by using Vista. You don't make mention of XP on that
particular box.

1) Shelby is using a Beta?
2) Shelby has a non-legit copy that went into reduced functionality mode?

I'd like to help but I need a post that tells me what's really going on
Shelby.

Vista legit doesn't go into reduced functionality mode lol "without telling
you." And no offense but if you have a Vista that is going to go into
reduced functionality mode--how precisely would it "tell you?"--Warning
message? Some people that use pirated Vista get warnings or when they load
them without a PK they get countdown warnings that could be extended by a
command.

Why are you futzing with whatever Vista you have on the box when you could
get a nicely running Vista by installing the one you have sitting on your
desk? What I can't wait to find out is what in the world kind of Vista did
you spend hours trying to troubleshoot? Does this Vista have a DVD attached
to it. If it does, try to do a startup repair on it. Just search this group
or the general group with the word "boot."

If I missed your point let me know. But your post cries out for what Vista
you have that you're struggling with you think is in reduced functionality
mode, and why you don't just pop in that new Vista waiting for an installt
hat we know is good.

If you think that there are a known percent of Vista legits that go into
reduced functionailty mode, it's a problem I feared would happen given the
erratic WGA performance for a year before Vista RTM'd but hasn't been
reported widely on the web.

Good luck,

CH


"Shelby Cain" <Shelby Cain@discussions.microsoft.com> wrote in message
news:2146E384-1A30-4692-9EC8-E4389DA821F9@microsoft.com...
>I received a free copy of Vista Business through the "Power of Together"
> promotion.
>
> As I'm currently evaluating whether or not Vista is going to fit my needs
> I
> haven't yet activated the copy. I'm currently try to find a permanent
> solution to an issue where Vista appears to go into something that I can
> only
> describe as partial reduced functionality mode after every reboot. The
> control panel in the start menu shows as empty, attempting to open the
> control panel causes the window to appear briefly and then close. Other
> features like the Windows Welcome Center show similar behavior either not
> opening at all (with the mouse cursor switching to the circular activity
> animation) or the window opening and the closing immediately.
>
> I spent many hours troubleshooting thinking this was potentially a
> hardware/driver issue until I eventually discovered people complaining of
> the
> same issue and that what I was facing was in fact Vista going into reduced
> functionality mode without telling me. The current work-around for the
> issue
> is stopping and restarting the Software License service after a reboot but
> obviously that isn't a permanent solution.
>
> I've reinstalled Vista several times and I can't isolate anything in
> particular that would be causing this issue. Does anyone have any
> suggestions on how to resolve this?
>
> Regards,
>
> Shelby Cain

Shelby--

Are you in any of these categories? Because if you're presenting a legit
Vista including its product key that has gone into reduced functionality
that you have activated that would be interesting. If I had that case, I'd
call MSFT Activation. Or are you misnaming a situation as reduced
functionality that isn't reduced functionality but is a broken Vista that
can be fixed via Startup Repair accessed from the Vista DVD?

The behavior of reduced functionality mode in Windows Vista
http://support.microsoft.com/kb/925582/en-us


CH

"Shelby Cain" <Shelby Cain@discussions.microsoft.com> wrote in message
news:2146E384-1A30-4692-9EC8-E4389DA821F9@microsoft.com...
>I received a free copy of Vista Business through the "Power of Together"
> promotion.
>
> As I'm currently evaluating whether or not Vista is going to fit my needs
> I
> haven't yet activated the copy. I'm currently try to find a permanent
> solution to an issue where Vista appears to go into something that I can
> only
> describe as partial reduced functionality mode after every reboot. The
> control panel in the start menu shows as empty, attempting to open the
> control panel causes the window to appear briefly and then close. Other
> features like the Windows Welcome Center show similar behavior either not
> opening at all (with the mouse cursor switching to the circular activity
> animation) or the window opening and the closing immediately.
>
> I spent many hours troubleshooting thinking this was potentially a
> hardware/driver issue until I eventually discovered people complaining of
> the
> same issue and that what I was facing was in fact Vista going into reduced
> functionality mode without telling me. The current work-around for the
> issue
> is stopping and restarting the Software License service after a reboot but
> obviously that isn't a permanent solution.
>
> I've reinstalled Vista several times and I can't isolate anything in
> particular that would be causing this issue. Does anyone have any
> suggestions on how to resolve this?
>
> Regards,
>
> Shelby Cain

"Chad Harris" wrote:

>
> Shelby--
>
> There are ways to renew the 30 day period, but I suspect you're beyond that.
> We've posted them many times on this and the general group. Your post isn't
> clear and I'll tell you why.
>

Your assumption is incorrect. I'm currently 3 days into a _clean_ install
(the _third_ one) on a system I built a week ago. I've haven't attempted to
activate my copy of Vista because of the problem I'm experiencing.

> You say you have a legit Vista sitting on the shelf you acquired from the PT
> offer. You obviously are complaining about a Vista setup on that box that
> has gone into reduced functionality mode and ironically, you're trying to
> evaluate whether to use the Power Together Vista that is legit by using
> what?
>

I'm evaluating whether Vista (Business edition obviously as that was the
version the PT promo gave out) is going to be problematic (more specifically
if driver support is problematic) or not on my hardware or if I should
purchase an oem version of XP instead. Obviously, I'd like to save money if
possible but I don't want to waste this license of Vista by activating it on
my system if Vista isn't going to run well. So far, the issue I'm
experiencing is a deal-breaker unless a solution for my problem becomes
apparent.

> So if that is an issue for you, it has to do with what you have on the box
> and what product key you put in or how you activated it.
>
> To me this doesn't make sense. You have a non-working Vista on the box that
> you think is in reduced functionality mode (meaning you can do next to
> nothing with it). Why not put in that PT Biz and format and install it.
> Evaluate Vista by using Vista. You don't make mention of XP on that
> particular box.
>
> 1) Shelby is using a Beta?
> 2) Shelby has a non-legit copy that went into reduced functionality mode?
>

1) I think my original post clearly states the copy of Vista I'm using was
received from the PT promo.
2) Why would my copy of Vista from the PT promotional be non-legit?

> I'd like to help but I need a post that tells me what's really going on
> Shelby.
>

What is going on is that I have a fresh install of Vista Business on a
system I built that is well within the 30 day evaluation period that
_appears_ to be switching to some sort of reduced functionality mode where I
can still run installed third-party applications yet things like the control
panel, windows welcome center, personalize desktop, etc refuse to open. The
crux of the issue is the fact that once I stop and restart the software
licensing service everything starts working normally and this leads me to
believe that this issue is somehow related to Vista's anti-piracy features.

> Vista legit doesn't go into reduced functionality mode lol "without telling
> you." And no offense but if you have a Vista that is going to go into

To respond in kind, "LOL RITE". It is clearly _impossible_ that a software
product as complex as Vista could have a _bug_ and Microsoft has _never_,
_ever_ had any bugs or problems with WGA in the past.

Why don't you check out this newsgroup post where someone is having the
_exact_ _same_ _issue_ I'm describing (in fact this was how I figured out
that restarting the SL service as a work-around) with the only material
difference being they've _already_ _activated_ their copy of Vista:

http://groups.google.com/group/micro...4bc805669d7932

>
> If you think that there are a known percent of Vista legits that go into
> reduced functionailty mode, it's a problem I feared would happen given the
> erratic WGA performance for a year before Vista RTM'd but hasn't been
> reported widely on the web.
>

I'm not making accusations here and I'm only reporting my experiences. I
find it very difficult to believe that my issue isn't related to Vista's
anti-piracy features since restarting the SL services fixes the issue but
I'll at least admit that there is a possibility that I'm wrong where you seem
to believe that the chances that I'm right is zero.

I'm obviously not the only person experiencing this issue and that is enough
for me regardless of whether or not you believe my issue is related to
Vista's anti-piracy features. Personally, I don't care about anything other
than figuring out the cause of this issue is so that I can utilize the free
copy of Vista I received from the PT promo as opposed to shelling out cash
for an oem version of XP.

Regards,

Shelby Cain

"Chad Harris" wrote:

> Shelby--
>
> Are you in any of these categories? Because if you're presenting a legit
> Vista including its product key that has gone into reduced functionality
> that you have activated that would be interesting. If I had that case, I'd
> call MSFT Activation. Or are you misnaming a situation as reduced
> functionality that isn't reduced functionality but is a broken Vista that
> can be fixed via Startup Repair accessed from the Vista DVD?
>
> The behavior of reduced functionality mode in Windows Vista
> http://support.microsoft.com/kb/925582/en-us
>
>

I realize that what I'm experiencing deviates from what you'd expect if
Vista was running in reduced functionality mode and that's why I said
"partial" in my first post. However, I can't help but feel that the fact
that my system starts working normally after I manually stop and start the
licensing service means that this is somehow related to Vista's
anti-tampering/anti-piracy features. This is the third clean install I'm on
and so far this has happened every single time.

I'd be tempted to call Microsoft for support but I really don't want to tie
this copy of Vista to my hardware if there isn't a known solution.

Regards,

Shelby Cain

Shelby--

I've complained about bugs that Vista does have as much as anyone. So
you're not springing something on me overnight. I've been using it for a
year and a half--every build.

So far, the issue I'm experiencing is a deal-breaker unless a solution for
my problem becomes
apparent.

You indicate now more clearly that Vista is broken but you are well within
the 30 day period. Those symptoms are quintissential reduced
functionality,but for whatever reason you have them.

You have two choices and a workaround. I've worked with this on somene's
box and I can tell you that all the MSKBs on control panel repair won't
work.

Workaround for control panel not coming up:

You can make a control panel easily by putting the most but not every applet
in a folder. Just make a folder on your desk; type control panel in the
search box>when folder comes up click Classic View and drag or copy everyone
of those shortcuts into your new folder.

Choice One: Format and start over--and activate within 30 days. That gives
you 30 more days to test. If you need to you could renew the 30 days a
couple times.

Or you can try to fix it with Startup Repair using your Power Together
acquired DVD.

I am sorry I misunderstood that you were within the period to activate it at
first. I agree with you it should not have gone into reduced functionality
mode which it appears to have. You should let them know. If this is
happening it confirms some of my fear that SPP would not function well for
everyone; and it would impose reduced functionality on legit Vista either
prior to or after the 30 day period.

One way to directly report this issue is to make a comment on the Vista team
blog, or you could let Darrell Gorter who is directly involved with Vista
setup know

darrellg@microsoft.com


Choice 2: Try to repair it but I doubt very seriously if it will repair:

You can try the Recovery link that allows you to
use Win RE's Startup Repair or if no joy, System Restore from there which
sometimes works when F8's Safe Mode>System Restore options (all 4 should be
tried) won't.

You can run Startup Repair by putting your Vista DVD in after the
language screen in setup. You can also run System Restore from the same
location.

You run the startup repair tool this way (and system restore from here is
also sometimes effective):

http://support.microsoft.com/kb/925810/en-us

How To Run Startup Repair In Vista Ultimate (Multiple Screenshots)
http://www.windowsvista.windowsreins...rtup/index.htm

Note The computer must be configured to start from a CD or from a DVD. For
information about how to configure the computer to start from a CD or from a
DVD, see the information that came with the computer.
2. Restart the computer. To do this, click Start, click the arrow next to
the Lock button, and then click Restart.

This usually means that you enter bios setup by whatever key or keys
(sometimes there is more than one key that will do it for your model--go to
pc manufacturer site) and configure CD to be first in the boot order.

See for ref:
Access/Enter Motherboard BIOS
http://www.michaelstevenstech.com/bios_manufacturer.htm

Note If you cannot restart the computer by using this method, use the power
button to turn off the computer. Then, turn the computer back on.

3. Set your language preference, and then click Next.

Note In most cases, the startup repair process starts automatically, and you
do not have the option to select it in the System Recovery Options menu.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, click the operating system
that you want to repair, and then click Next.

6. In the System Recovery Options menu, click Startup Repair to start the
repair process.

7. When the repair process is complete, click Finish.

Additional References for Startup Repair With Screenshots:

How to Use Startup Repair:

***Accessing Windows RE (Repair Environment):***

1) Insert Media into PC (the DVD you burned)

2) ***You will see on the Vista logo setup screen after lang. options in the
lower left corner, a link called "System Recovery Options."***

Screenshot: System Recovery Options (Lower Left Link)
http://blogs.itecn.net/photos/liuhui...4/500x375.aspx

Screenshot: (Click first option "Startup Repair"
http://www.leedesmond.com/images/img...SysRecOpt2.bmp

How To Run Startup Repair In Vista Ultimate (Multiple Screenshots)
http://www.windowsvista.windowsreins...rtup/index.htm

3) Select your OS for repair.

4) Its been my experience that you can see some causes of the crash from
theWin RE feature:

You'll have a choice there of using:

1) Startup Repair
2) System Restore
3) Complete PC Restore
___________________

You could also:

Try to F8 to the Windows Adv Options Menu>try 3 safe modes there (I don't
use WGA) and Last Known Good>then I go to Win RE in Vista. That gives you a
choice of Safe Mode, Safe Mode with Networking,and Safe Mode with Command
Prompt.

These methods are outlined in

A description of the Safe Mode Boot options in Windows XP/and Vista
http://support.microsoft.com/kb/315222/

You will need this reference:

How to start the System Restore tool at a command prompt in Windows XP
http://support.microsoft.com/kb/304449/en-us

The command to use for system restore at the safe mode cmd prompt is:

%systemroot%\system32\restore\rstrui.exe

The reason for doing this is one of these choices may work, when the other
doesn't. My experience is that people do not fully try F8 when they think
or have said they have. It is that they can almost always reach Windows
Advanced Options though.


Good luck,

CH





_______________


"Shelby Cain" <ShelbyCain@discussions.microsoft.com> wrote in message
news:A116440A-075A-4875-8E9F-4DB7F57BD178@microsoft.com...
>
>
> "Chad Harris" wrote:
>
>> Shelby--
>>
>> Are you in any of these categories? Because if you're presenting a legit
>> Vista including its product key that has gone into reduced functionality
>> that you have activated that would be interesting. If I had that case,
>> I'd
>> call MSFT Activation. Or are you misnaming a situation as reduced
>> functionality that isn't reduced functionality but is a broken Vista that
>> can be fixed via Startup Repair accessed from the Vista DVD?
>>
>> The behavior of reduced functionality mode in Windows Vista
>> http://support.microsoft.com/kb/925582/en-us
>>
>>
>
> I realize that what I'm experiencing deviates from what you'd expect if
> Vista was running in reduced functionality mode and that's why I said
> "partial" in my first post. However, I can't help but feel that the fact
> that my system starts working normally after I manually stop and start the
> licensing service means that this is somehow related to Vista's
> anti-tampering/anti-piracy features. This is the third clean install I'm
> on
> and so far this has happened every single time.
>
> I'd be tempted to call Microsoft for support but I really don't want to
> tie
> this copy of Vista to my hardware if there isn't a known solution.
>
> Regards,
>
> Shelby Cain
>
>

"Chad Harris" wrote:

> Shelby--
>
> I've complained about bugs that Vista does have as much as anyone. So
> you're not springing something on me overnight. I've been using it for a
> year and a half--every build.
>

For what it is worth, the public preview builds of Vista I tested (on
different hardware) worked very well.

>
> You indicate now more clearly that Vista is broken but you are well within
> the 30 day period. Those symptoms are quintissential reduced
> functionality,but for whatever reason you have them.
>
> You have two choices and a workaround. I've worked with this on somene's
> box and I can tell you that all the MSKBs on control panel repair won't
> work.
>
> Workaround for control panel not coming up:
>
> You can make a control panel easily by putting the most but not every applet
> in a folder. Just make a folder on your desk; type control panel in the
> search box>when folder comes up click Classic View and drag or copy everyone
> of those shortcuts into your new folder.
>

I believe (although I can't recall for sure) one of my first attempts was to
make shortcuts to the cpl files in system32. None of the applets would start
up. I'll try and verify that though.

> Choice One: Format and start over--and activate within 30 days. That gives
> you 30 more days to test. If you need to you could renew the 30 days a
> couple times.
>

I have no problems reformatting and reinstalling to continue testing. I'd
like to get this issue identified as I'm sure I'm not the only one suffering
from it.
>
> I am sorry I misunderstood that you were within the period to activate it at
> first. I agree with you it should not have gone into reduced functionality
> mode which it appears to have. You should let them know. If this is
> happening it confirms some of my fear that SPP would not function well for
> everyone; and it would impose reduced functionality on legit Vista either
> prior to or after the 30 day period.
>

Had you asked me two weeks ago if it'd be possible for Vista's anti-piracy
features to malfunction and bite someone that was using a truly legit install
my response would have been "I seriously doubt it as Microsoft would probably
test those features to the nth degree". Now, having experienced this issue
where it _appears_ that Vista is running in some sort of RF mode, I'm not so
sure I'd be confident in saying that. I guess the good thing here is that at
least this issue doesn't appear very widespread.

> One way to directly report this issue is to make a comment on the Vista team
> blog, or you could let Darrell Gorter who is directly involved with Vista
> setup know
>
> darrellg@microsoft.com
>

Thanks for the information. I'll post on the blog and contact him privately
and see if he'd be interested in any logs off the machine in question.

>
> Choice 2: Try to repair it but I doubt very seriously if it will repair:
>

[snip]

I'll probably give that a try eventually but, like you, I'm pretty skeptical
a repair install will help when a clean install hasn't.

Regards,

Shelby Cain

"Shelby Cain" wrote:
>
> I'll probably give that a try eventually but, like you, I'm pretty skeptical
> a repair install will help when a clean install hasn't.
>

Seems like the 4th clean install may not be acting up. I had planned on
making a restore point after every driver I installed until I was able to
reproduce the issue but it looks like that isn't going to happen.

The interesting thing to note about this install that is different from the
previous three is that the Nvidia 100.65 WHQL drivers were auto-installed via
Windows Update whereas I had to manually install them before with the drivers
obtained from Nvidia's website. I've noticed that the other person
complaining about this issue has the exact same video card I do and I'm
wondering if that is a really just a coincidence.

I'll update this thread if I'm able to reproduce the issue but it seems like
I'm no longer having the issue.

Regards,

Shelby Cain

"Shelby Cain" wrote:

>
>
> "Shelby Cain" wrote:
> >
> > I'll probably give that a try eventually but, like you, I'm pretty skeptical
> > a repair install will help when a clean install hasn't.
> >
>
> Seems like the 4th clean install may not be acting up. I had planned on
> making a restore point after every driver I installed until I was able to
> reproduce the issue but it looks like that isn't going to happen.
>
> The interesting thing to note about this install that is different from the
> previous three is that the Nvidia 100.65 WHQL drivers were auto-installed via
> Windows Update whereas I had to manually install them before with the drivers
> obtained from Nvidia's website. I've noticed that the other person
> complaining about this issue has the exact same video card I do and I'm
> wondering if that is a really just a coincidence.
>
> I'll update this thread if I'm able to reproduce the issue but it seems like
> I'm no longer having the issue.
>

.... and of course 5 minutes after I made that post it starts doing the same
thing. This is really frustrating.

Shelby--

I agree with everything you said. I think Darrell would probably like to
get your logs--he's been consistently helpful on this group and others and
the Beta groups for a long time. In my experience the setup people want to
get to the logs to analyze them if they can provide material that tells what
is going on.

One thing I want to make clear. Although I don't *think a startup repair
(which is different coding in Vista than a repair install in XP will work
with these symptoms, it could and we're only talking about a couple minutes
of time. Doing this has no risk to what you have whatsoever. Here are the
directions for using Vista Win RE's Startup Repair and Safe Mode from that
environmnet.

I put up the steps for doing this (different from an XP repair install
booting from the XP CD) with the Vista DVD on my last post as well as steps
that could work from the F8 aka Windows Advanced Options menu.

You can try the Recovery link that allows you touse Win RE's Startup Repair
or if no joy, System Restore from there whichsometimes works when F8's Safe
Mode>System Restore options (all 4 should be tried):

You can run Startup Repair by putting your Vista DVD in after the
language screen in setup. You can also run System Restore from the same
location.

You run the startup repair tool this way (and system restore from here is
also sometimes effective):

http://support.microsoft.com/kb/925810/en-us

How To Run Startup Repair In Vista Ultimate (Multiple Screenshots)
http://www.windowsvista.windowsreins...rtup/index.htm

Note The computer must be configured to start from a CD or from a DVD. For
information about how to configure the computer to start from a CD or from a
DVD, see the information that came with the computer.
2. Restart the computer. To do this, click Start, click the arrow next to
the Lock button, and then click Restart.

This usually means that you enter bios setup by whatever key or keys
(sometimes there is more than one key that will do it for your model--go to
PC manufacturer site) and configure CD to be first in the boot order.

See for ref:
Access/Enter Motherboard BIOS
http://www.michaelstevenstech.com/bios_manufacturer.htm

Note If you cannot restart the computer by using this method, use the power
button to turn off the computer. Then, turn the computer back on.

3. Set your language preference, and then click Next.

Note In most cases, the startup repair process starts automatically, and you
do not have the option to select it in the System Recovery Options menu.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, click the operating system
that you want to repair, and then click Next.

6. In the System Recovery Options menu, click Startup Repair to start the
repair process.

7. When the repair process is complete, click Finish.

Additional References for Startup Repair With Screenshots:

How to Use Startup Repair:

***Accessing Windows RE (Repair Environment):***

1) Insert Media into PC (the DVD you burned)

2) ***You will see on the Vista logo setup screen after lang. options in the
lower left corner, a link called "System Recovery Options."***

Screenshot: System Recovery Options (Lower Left Link)
http://blogs.itecn.net/photos/liuhui...4/500x375.aspx

Screenshot: (Click first option "Startup Repair"
http://www.leedesmond.com/images/img...SysRecOpt2.bmp

How To Run Startup Repair In Vista Ultimate (Multiple Screenshots)
http://www.windowsvista.windowsreins...rtup/index.htm

3) Select your OS for repair.

4) Its been my experience that you can see some causes of the crash from
theWin RE feature:

You'll have a choice there of using:

1) Startup Repair
2) System Restore
3) Complete PC Restore
___________________

You could also:

Try to F8 to the Windows Adv Options Menu>try 3 safe modes there (I don't
use WGA) and Last Known Good>then I go to Win RE in Vista. That gives you a
choice of Safe Mode, Safe Mode with Networking,and Safe Mode with Command
Prompt.

These methods are outlined in

A description of the Safe Mode Boot options in Windows XP/and Vista
http://support.microsoft.com/kb/315222/

You will need this reference:

How to start the System Restore tool at a command prompt in Windows XP
http://support.microsoft.com/kb/304449/en-us

The command to use for system restore at the safe mode cmd prompt is:

%systemroot%\system32\restore\rstrui.exe

The reason for doing this is one of these choices may work, when the other
doesn't. My experience is that people do not fully try F8 when they think
or have said they have. It is that they can almost always reach Windows
Advanced Options though.


Good luck,

CH







"Shelby Cain" <ShelbyCain@discussions.microsoft.com> wrote in message
news:0FA67547-478E-4788-BDC1-2075436FE55B@microsoft.com...
>
>
> "Chad Harris" wrote:
>
>> Shelby--
>>
>> I've complained about bugs that Vista does have as much as anyone. So
>> you're not springing something on me overnight. I've been using it for a
>> year and a half--every build.
>>
>
> For what it is worth, the public preview builds of Vista I tested (on
> different hardware) worked very well.
>
>>
>> You indicate now more clearly that Vista is broken but you are well
>> within
>> the 30 day period. Those symptoms are quintissential reduced
>> functionality,but for whatever reason you have them.
>>
>> You have two choices and a workaround. I've worked with this on somene's
>> box and I can tell you that all the MSKBs on control panel repair won't
>> work.
>>
>> Workaround for control panel not coming up:
>>
>> You can make a control panel easily by putting the most but not every
>> applet
>> in a folder. Just make a folder on your desk; type control panel in the
>> search box>when folder comes up click Classic View and drag or copy
>> everyone
>> of those shortcuts into your new folder.
>>
>
> I believe (although I can't recall for sure) one of my first attempts was
> to
> make shortcuts to the cpl files in system32. None of the applets would
> start
> up. I'll try and verify that though.
>
>> Choice One: Format and start over--and activate within 30 days. That
>> gives
>> you 30 more days to test. If you need to you could renew the 30 days a
>> couple times.
>>
>
> I have no problems reformatting and reinstalling to continue testing. I'd
> like to get this issue identified as I'm sure I'm not the only one
> suffering
> from it.
>>
>> I am sorry I misunderstood that you were within the period to activate it
>> at
>> first. I agree with you it should not have gone into reduced
>> functionality
>> mode which it appears to have. You should let them know. If this is
>> happening it confirms some of my fear that SPP would not function well
>> for
>> everyone; and it would impose reduced functionality on legit Vista either
>> prior to or after the 30 day period.
>>
>
> Had you asked me two weeks ago if it'd be possible for Vista's anti-piracy
> features to malfunction and bite someone that was using a truly legit
> install
> my response would have been "I seriously doubt it as Microsoft would
> probably
> test those features to the nth degree". Now, having experienced this
> issue
> where it _appears_ that Vista is running in some sort of RF mode, I'm not
> so
> sure I'd be confident in saying that. I guess the good thing here is that
> at
> least this issue doesn't appear very widespread.
>
>> One way to directly report this issue is to make a comment on the Vista
>> team
>> blog, or you could let Darrell Gorter who is directly involved with
>> Vista
>> setup know
>>
>> darrellg@microsoft.com
>>
>
> Thanks for the information. I'll post on the blog and contact him
> privately
> and see if he'd be interested in any logs off the machine in question.
>
>>
>> Choice 2: Try to repair it but I doubt very seriously if it will repair:
>>
>
> [snip]
>
> I'll probably give that a try eventually but, like you, I'm pretty
> skeptical
> a repair install will help when a clean install hasn't.
>
> Regards,
>
> Shelby Cain
>
>