RE: Multiple Display Adapters - Cannot get 2nd to work..

Im having a similar problem with two display adapters, but I removed my
Nvidia card and dropped in a second ATI card. I cant get the second (older
model) ATI card to enable now, but I cant tell if its a driver compatibility
problem or ?

"Steve Childs" wrote:

> I've got an ATI X800 PCI-E card as my main adapter, but I've got a Radeon
> 9250 and Geforce FX5200, both PCI. With Beta 2 I tried both cards and niether
> worked, the driver for the 2nd card wouldn't load.
>
> At the moment I've got the 5200 plugged in and its not working, but I read
> that Vista only allows one WDDM to be installed, so multiple cards would need
> to be from the same manufacturer.
>
> Has anyone else got Vista to work with multiple graphics cards?
>
> I'm up to RC1 now and haven't tried the ATI card yet, just wondering if
> anyone else had got any experience with this issue.

I've since found out what it was. Vista only allows one Vista Mode Device
driver to load at once, so the driver needs to support both cards. Needless
to say, they need at the least to be from the same manufacturer. I ended up
buying a new GF 7600 card to go with the 5200 and it then worked fine.
However, you do have the problem that the 5200 is the highest spec PCI card
you can find (or at least I could) and performance sucks with the Aero skin
on.

In the end I uninstalled Vista, reinstalled XP and put my X800 back in with
my 9250 and they're both working fine.

I have the same issue, The Cards I am using are the ATI x600 PICe and an ATI
FireMV PCI, it appears that the both cards work independantly (with the
correct driver installed), but when you try and enable both cards together
you get the very helpful "Windows has stopped this device because it has
reported problems. (Code 43)" with no additional information, It does not
matter which card is first, (i.e disabling one then the other) Is there a way
to get this to work? I hate the thought of going backwards, even thought in
this case going backwards is definitly going forward!

"Steve Childs" wrote:

> I've since found out what it was. Vista only allows one Vista Mode Device
> driver to load at once, so the driver needs to support both cards. Needless
> to say, they need at the least to be from the same manufacturer. I ended up
> buying a new GF 7600 card to go with the 5200 and it then worked fine.
> However, you do have the problem that the 5200 is the highest spec PCI card
> you can find (or at least I could) and performance sucks with the Aero skin
> on.
>
> In the end I uninstalled Vista, reinstalled XP and put my X800 back in with
> my 9250 and they're both working fine.

Hello,
Here is the link with information about this situation:
MultiMonitor Support and Windows Vista
http://www.microsoft.com/whdc/device...imonVista.mspx


Thanks,
Darrell Gorter[MSFT]

This posting is provided "AS IS" with no warranties, and confers no rights
--------------------
|>Thread-Topic: Multiple Display Adapters - Cannot get 2nd to work..
|>thread-index: Acc/DAL18KEkt4GQQNWqf7UmFMcSKg==
|>X-WBNR-Posting-Host: 216.75.170.134
|>From: =?Utf-8?B?S2VudGVjaA==?= <Kentech@discussions.microsoft.com>
|>References: <39DE5BF4-335B-44B3-BA49-C828CE2B8D4F@microsoft.com>
<8D9B3494-5107-4988-A49E-6ADD204381E1@microsoft.com>
<11DB0C32-0847-48E6-BAA2-851A094F69C6@microsoft.com>
|>Subject: RE: Multiple Display Adapters - Cannot get 2nd to work..
|>Date: Tue, 23 Jan 2007 08:32:02 -0800
|>Lines: 21
|>Message-ID: <9151BFBE-2B8E-435E-A565-B55321702093@microsoft.com>
|>MIME-Version: 1.0
|>Content-Type: text/plain;
|> charset="Utf-8"
|>Content-Transfer-Encoding: 7bit
|>X-Newsreader: Microsoft CDO for Windows 2000
|>Content-Class: urn:content-classes:message
|>Importance: normal
|>Priority: normal
|>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
|>Newsgroups: microsoft.public.windows.vista.hardware_devices
|>Path: TK2MSFTNGHUB02.phx.gbl
|>Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.vista.hardware_devices:21 42
|>NNTP-Posting-Host: tk2msftibfm01.phx.gbl 10.40.244.149
|>X-Tomcat-NG: microsoft.public.windows.vista.hardware_devices
|>
|>I have the same issue, The Cards I am using are the ATI x600 PICe and an
ATI
|>FireMV PCI, it appears that the both cards work independantly (with the
|>correct driver installed), but when you try and enable both cards
together
|>you get the very helpful "Windows has stopped this device because it has
|>reported problems. (Code 43)" with no additional information, It does not
|>matter which card is first, (i.e disabling one then the other) Is there a
way
|>to get this to work? I hate the thought of going backwards, even thought
in
|>this case going backwards is definitly going forward!
|>
|>"Steve Childs" wrote:
|>
|>> I've since found out what it was. Vista only allows one Vista Mode
Device
|>> driver to load at once, so the driver needs to support both cards.
Needless
|>> to say, they need at the least to be from the same manufacturer. I
ended up
|>> buying a new GF 7600 card to go with the 5200 and it then worked fine.
|>> However, you do have the problem that the 5200 is the highest spec PCI
card
|>> you can find (or at least I could) and performance sucks with the Aero
skin
|>> on.
|>>
|>> In the end I uninstalled Vista, reinstalled XP and put my X800 back in
with
|>> my 9250 and they're both working fine.
|>