Welcome to the Microsoft Windows Vista Community Forums - Vistaheads, YOUR Largest Resource for Windows Vista related information.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so , join our community today!
If you have any problems with the registration process or your account login, please contact us.
|
|
|
previously working USB devices now showing as "Unknown Device"
microsoft.public.windows.vista hardware devices
|
Click On Your Flag for Translation
|

01-08-2007
|
|
|
|
previously working USB devices now showing as "Unknown Device"
Hello-
All of a sudden a few days ago, many of my USB devices started showing as
Unknown Devices in the Device Manager. I've read that this sometimes happens
in WinXP too- but no post that I found about the problem proposed a solution
(for Vista or XP.) If I disable the "Standard Enhanced PC to USB Host
Controller", the system then locates drivers for all of the devices, but runs
them in USB 1.1 (slow!) mode.
I'm seeing this for flash storage devices (thumb drives, flash card readers,
ipod), logitech quickcam 5000, plantronics USB headset etc. Oddly, my MS
Intellimouse Explorer 3.0 and APC UPS work fine!
Anyone know what to do?
I have a ton of USB devices defined in the registry under
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB\ , but regedit does not
allow me to remove any of these.
I also unfortunately don't have a System Restore Point to back when my USB
devices were working.
If anyone has ideas for something to try, please post! Thanks, Al
|
|

01-08-2007
|
|
|
|
RE: previously working USB devices now showing as "Unknown Device"
I'm basically having this problem:
http://support.microsoft.com/kb/920875
except that the page has a hotfix for only XP and not Vista! Hmmm....
"A L" wrote:
> Hello-
>
> All of a sudden a few days ago, many of my USB devices started showing as
> Unknown Devices in the Device Manager. I've read that this sometimes happens
> in WinXP too- but no post that I found about the problem proposed a solution
> (for Vista or XP.) If I disable the "Standard Enhanced PC to USB Host
> Controller", the system then locates drivers for all of the devices, but runs
> them in USB 1.1 (slow!) mode.
>
> I'm seeing this for flash storage devices (thumb drives, flash card readers,
> ipod), logitech quickcam 5000, plantronics USB headset etc. Oddly, my MS
> Intellimouse Explorer 3.0 and APC UPS work fine!
>
> Anyone know what to do?
> I have a ton of USB devices defined in the registry under
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB\ , but regedit does not
> allow me to remove any of these.
>
> I also unfortunately don't have a System Restore Point to back when my USB
> devices were working.
>
> If anyone has ideas for something to try, please post! Thanks, Al
|
|

01-08-2007
|
|
|
|
Re: previously working USB devices now showing as "Unknown Device"
have you tried uninstalling the ROOT HUBS, shutting down for 3-5 minutes,
rebooting and allowing the system to find and reinstall the USB devices.
mikeyhsd@sport.rr.com
"A L" <AL@discussions.microsoft.com> wrote in message news:97982AB4-57B3-4165-93D3-84FFE87F6261@microsoft.com...
Hello-
All of a sudden a few days ago, many of my USB devices started showing as
Unknown Devices in the Device Manager. I've read that this sometimes happens
in WinXP too- but no post that I found about the problem proposed a solution
(for Vista or XP.) If I disable the "Standard Enhanced PC to USB Host
Controller", the system then locates drivers for all of the devices, but runs
them in USB 1.1 (slow!) mode.
I'm seeing this for flash storage devices (thumb drives, flash card readers,
ipod), logitech quickcam 5000, plantronics USB headset etc. Oddly, my MS
Intellimouse Explorer 3.0 and APC UPS work fine!
Anyone know what to do?
I have a ton of USB devices defined in the registry under
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB\ , but regedit does not
allow me to remove any of these.
I also unfortunately don't have a System Restore Point to back when my USB
devices were working.
If anyone has ideas for something to try, please post! Thanks, Al
|
|

01-10-2007
|
|
|
|
Re: previously working USB devices now showing as "Unknown Device"
Thanks for the help. I did try uninstalling all the various USB devices in
the Device Manager multiple times. No luck. I ended up installing a spare
PCI USB 2 card I had and am able to connect everything through there instead
of the ports on my motherboard. Looks like MS has a fix for this problem in
XP:
http://support.microsoft.com/kb/920875
Hopefully they'll release a hotfix for Vista too. Al
ps- I have XP installed on another partition, the motherboard USB jacks work
fine there, so it's definitely have software issue I'm having.
"mikeyhsd" wrote:
> have you tried uninstalling the ROOT HUBS, shutting down for 3-5 minutes,
> rebooting and allowing the system to find and reinstall the USB devices.
>
>
>
> mikeyhsd@sport.rr.com
>
>
>
> "A L" <AL@discussions.microsoft.com> wrote in message news:97982AB4-57B3-4165-93D3-84FFE87F6261@microsoft.com...
> Hello-
>
> All of a sudden a few days ago, many of my USB devices started showing as
> Unknown Devices in the Device Manager. I've read that this sometimes happens
> in WinXP too- but no post that I found about the problem proposed a solution
> (for Vista or XP.) If I disable the "Standard Enhanced PC to USB Host
> Controller", the system then locates drivers for all of the devices, but runs
> them in USB 1.1 (slow!) mode.
>
> I'm seeing this for flash storage devices (thumb drives, flash card readers,
> ipod), logitech quickcam 5000, plantronics USB headset etc. Oddly, my MS
> Intellimouse Explorer 3.0 and APC UPS work fine!
>
> Anyone know what to do?
> I have a ton of USB devices defined in the registry under
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB\ , but regedit does not
> allow me to remove any of these.
>
> I also unfortunately don't have a System Restore Point to back when my USB
> devices were working.
>
> If anyone has ideas for something to try, please post! Thanks, Al
|
|

02-26-2007
|
|
|
|
Re: previously working USB devices now showing as "Unknown Device"
I am having the same problem - how do I get the hotfix that is mentioned?
--
barb
"A L" wrote:
> Thanks for the help. I did try uninstalling all the various USB devices in
> the Device Manager multiple times. No luck. I ended up installing a spare
> PCI USB 2 card I had and am able to connect everything through there instead
> of the ports on my motherboard. Looks like MS has a fix for this problem in
> XP:
>
> http://support.microsoft.com/kb/920875
>
> Hopefully they'll release a hotfix for Vista too. Al
>
> ps- I have XP installed on another partition, the motherboard USB jacks work
> fine there, so it's definitely have software issue I'm having.
>
> "mikeyhsd" wrote:
>
> > have you tried uninstalling the ROOT HUBS, shutting down for 3-5 minutes,
> > rebooting and allowing the system to find and reinstall the USB devices.
> >
> >
> >
> > mikeyhsd@sport.rr.com
> >
> >
> >
> > "A L" <AL@discussions.microsoft.com> wrote in message news:97982AB4-57B3-4165-93D3-84FFE87F6261@microsoft.com...
> > Hello-
> >
> > All of a sudden a few days ago, many of my USB devices started showing as
> > Unknown Devices in the Device Manager. I've read that this sometimes happens
> > in WinXP too- but no post that I found about the problem proposed a solution
> > (for Vista or XP.) If I disable the "Standard Enhanced PC to USB Host
> > Controller", the system then locates drivers for all of the devices, but runs
> > them in USB 1.1 (slow!) mode.
> >
> > I'm seeing this for flash storage devices (thumb drives, flash card readers,
> > ipod), logitech quickcam 5000, plantronics USB headset etc. Oddly, my MS
> > Intellimouse Explorer 3.0 and APC UPS work fine!
> >
> > Anyone know what to do?
> > I have a ton of USB devices defined in the registry under
> > HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB\ , but regedit does not
> > allow me to remove any of these.
> >
> > I also unfortunately don't have a System Restore Point to back when my USB
> > devices were working.
> >
> > If anyone has ideas for something to try, please post! Thanks, Al
|
|

02-27-2007
|
|
|
|
Re: previously working USB devices now showing as "Unknown Device"
The set of patches that were released via Windows Updates the day that Vista
became available to consumers had the patch and it fixed my problem. I don't
remember the number unfortunately.
"barb" wrote:
> I am having the same problem - how do I get the hotfix that is mentioned?
> --
> barb
>
>
> "A L" wrote:
>
> > Thanks for the help. I did try uninstalling all the various USB devices in
> > the Device Manager multiple times. No luck. I ended up installing a spare
> > PCI USB 2 card I had and am able to connect everything through there instead
> > of the ports on my motherboard. Looks like MS has a fix for this problem in
> > XP:
> >
> > http://support.microsoft.com/kb/920875
> >
> > Hopefully they'll release a hotfix for Vista too. Al
> >
> > ps- I have XP installed on another partition, the motherboard USB jacks work
> > fine there, so it's definitely have software issue I'm having.
> >
> > "mikeyhsd" wrote:
> >
> > > have you tried uninstalling the ROOT HUBS, shutting down for 3-5 minutes,
> > > rebooting and allowing the system to find and reinstall the USB devices.
> > >
> > >
> > >
> > > mikeyhsd@sport.rr.com
> > >
> > >
> > >
> > > "A L" <AL@discussions.microsoft.com> wrote in message news:97982AB4-57B3-4165-93D3-84FFE87F6261@microsoft.com...
> > > Hello-
> > >
> > > All of a sudden a few days ago, many of my USB devices started showing as
> > > Unknown Devices in the Device Manager. I've read that this sometimes happens
> > > in WinXP too- but no post that I found about the problem proposed a solution
> > > (for Vista or XP.) If I disable the "Standard Enhanced PC to USB Host
> > > Controller", the system then locates drivers for all of the devices, but runs
> > > them in USB 1.1 (slow!) mode.
> > >
> > > I'm seeing this for flash storage devices (thumb drives, flash card readers,
> > > ipod), logitech quickcam 5000, plantronics USB headset etc. Oddly, my MS
> > > Intellimouse Explorer 3.0 and APC UPS work fine!
> > >
> > > Anyone know what to do?
> > > I have a ton of USB devices defined in the registry under
> > > HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB\ , but regedit does not
> > > allow me to remove any of these.
> > >
> > > I also unfortunately don't have a System Restore Point to back when my USB
> > > devices were working.
> > >
> > > If anyone has ideas for something to try, please post! Thanks, Al
|
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 06:57.
|
|