RE: Driver error on USB Stick and other USB devices

I got the same error with all USB Mass Storage devices from flash drives to
iPods. I was able to successfully get them working by uninstalling the
software for my Netgear SC101 network storage unit, which doesn't work in
Vista anyway. Perhaps there is a similar device with bad drivers on your
system mucking things up as well.

Hope this helps,

Phil

"Chris" wrote:

> After installing an upgrade to 5600 I tried to install
> - a compact flash
> - 2 different usb sticks
> - a cf card, sd card, memory stick card reader on USB
>
> All have the same issue. The USB storage driver installs but the device
> driver underneath fails with the error
> "Disk Drive"
> The drivers for this device are not installed. (Code 28)
> The parameter is incorrect.
>
> This are standard USB sticks or Compact flash cards. Do i really need a
> driver from the manufacturer for them, should those standard drivers not be
> included?
>
> the events I get are like:
> Driver Management concluded the process to install driver
> FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1. 00\058F312D81B&0 with the
> following status: 87.
>
> Any help is appreciated!

Thanks. This solved my problems. It must have been a conflict

"Phil Keogh" wrote:

> I got the same error with all USB Mass Storage devices from flash drives to
> iPods. I was able to successfully get them working by uninstalling the
> software for my Netgear SC101 network storage unit, which doesn't work in
> Vista anyway. Perhaps there is a similar device with bad drivers on your
> system mucking things up as well.
>
> Hope this helps,
>
> Phil
>
> "Chris" wrote:
>
> > After installing an upgrade to 5600 I tried to install
> > - a compact flash
> > - 2 different usb sticks
> > - a cf card, sd card, memory stick card reader on USB
> >
> > All have the same issue. The USB storage driver installs but the device
> > driver underneath fails with the error
> > "Disk Drive"
> > The drivers for this device are not installed. (Code 28)
> > The parameter is incorrect.
> >
> > This are standard USB sticks or Compact flash cards. Do i really need a
> > driver from the manufacturer for them, should those standard drivers not be
> > included?
> >
> > the events I get are like:
> > Driver Management concluded the process to install driver
> > FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> > USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1. 00\058F312D81B&0 with the
> > following status: 87.
> >
> > Any help is appreciated!

OH MY GOSH!!!!!!!!!!!! IT WORKED!!!!!!!!!!!!!!!!

THIS FIXED MY ENTIRE PROBLEM OF NOT BEING ABLE TO INSTALL MY iPOD, HP
PERSONAL MEDIA DEVICE 350GB, & MY WESTERN DIGITAL 500GB USB STORAGE.

I HAD THIS INSTALLED ON MY COMPUTER FOR MY SECONDARY NETWORK AT HOME.

PLEASE SEND THIS AS A FIX TO THE BIG DOGS AT MICROSOFT...

THANK YOU, THANK YOU, THANK YOU!!!!!!!!!!!!!!!!!!!

"Phil Keogh" wrote:

> I got the same error with all USB Mass Storage devices from flash drives to
> iPods. I was able to successfully get them working by uninstalling the
> software for my Netgear SC101 network storage unit, which doesn't work in
> Vista anyway. Perhaps there is a similar device with bad drivers on your
> system mucking things up as well.
>
> Hope this helps,
>
> Phil
>
> "Chris" wrote:
>
> > After installing an upgrade to 5600 I tried to install
> > - a compact flash
> > - 2 different usb sticks
> > - a cf card, sd card, memory stick card reader on USB
> >
> > All have the same issue. The USB storage driver installs but the device
> > driver underneath fails with the error
> > "Disk Drive"
> > The drivers for this device are not installed. (Code 28)
> > The parameter is incorrect.
> >
> > This are standard USB sticks or Compact flash cards. Do i really need a
> > driver from the manufacturer for them, should those standard drivers not be
> > included?
> >
> > the events I get are like:
> > Driver Management concluded the process to install driver
> > FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> > USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1. 00\058F312D81B&0 with the
> > following status: 87.
> >
> > Any help is appreciated!

GREAT ! I had the same issue. Netgear SC101 software was the problem. Thank
you !

"Phil Keogh" wrote:

> I got the same error with all USB Mass Storage devices from flash drives to
> iPods. I was able to successfully get them working by uninstalling the
> software for my Netgear SC101 network storage unit, which doesn't work in
> Vista anyway. Perhaps there is a similar device with bad drivers on your
> system mucking things up as well.
>
> Hope this helps,
>
> Phil
>
> "Chris" wrote:
>
> > After installing an upgrade to 5600 I tried to install
> > - a compact flash
> > - 2 different usb sticks
> > - a cf card, sd card, memory stick card reader on USB
> >
> > All have the same issue. The USB storage driver installs but the device
> > driver underneath fails with the error
> > "Disk Drive"
> > The drivers for this device are not installed. (Code 28)
> > The parameter is incorrect.
> >
> > This are standard USB sticks or Compact flash cards. Do i really need a
> > driver from the manufacturer for them, should those standard drivers not be
> > included?
> >
> > the events I get are like:
> > Driver Management concluded the process to install driver
> > FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> > USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1. 00\058F312D81B&0 with the
> > following status: 87.
> >
> > Any help is appreciated!