usb drivers in vista (sis)

Hi maybe someone here can help. built a system for vista with a FIC mainboard
with an SIS chipset. everything works great with the exception of the USB!!
the motherboard lists SIS 7002 enhanced chip for USB 2.0 and has drivers for
that on the disc. Vista only sees the chipset as a 7001 (usb 1.1) chipset.
by the hardware list the 7002 USB 2.0 should be loaded but if I manually
change them they show a hardware problem and revert back to the 7001 chip
doing a driver update.. any ideas on how to resolve this? any help would be
great

needalittle05,

Here is a web page that HP put up for its customers having USB issues, but
you can use it as USB issues are pretty much the same across the board:

http://h10025.www1.hp.com/ewfrf/wc/g...me=c008201 97

Take a look to determine whether one or more of the remedial suggestions
could apply to your situation.
--
freddy


"needalittle05" wrote:

> Hi maybe someone here can help. built a system for vista with a FIC mainboard
> with an SIS chipset. everything works great with the exception of the USB!!
> the motherboard lists SIS 7002 enhanced chip for USB 2.0 and has drivers for
> that on the disc. Vista only sees the chipset as a 7001 (usb 1.1) chipset.
> by the hardware list the 7002 USB 2.0 should be loaded but if I manually
> change them they show a hardware problem and revert back to the 7001 chip
> doing a driver update.. any ideas on how to resolve this? any help would be
> great
>

needalittle05 wrote:
> Hi maybe someone here can help. built a system for vista with a FIC mainboard
> with an SIS chipset. everything works great with the exception of the USB!!
> the motherboard lists SIS 7002 enhanced chip for USB 2.0 and has drivers for
> that on the disc. Vista only sees the chipset as a 7001 (usb 1.1) chipset.
> by the hardware list the 7002 USB 2.0 should be loaded but if I manually
> change them they show a hardware problem and revert back to the 7001 chip
> doing a driver update.. any ideas on how to resolve this? any help would be
> great

Does your BIOS have a setting for 'Legacy USB Support'? If yes, try
changing it to the opposite setting.

Hello
I think you should install an update from Microsoft, here is the website
http://www.microsoft.com/downloads/d...displaylang=en

"needalittle05" wrote:

> Hi maybe someone here can help. built a system for vista with a FIC mainboard
> with an SIS chipset. everything works great with the exception of the USB!!
> the motherboard lists SIS 7002 enhanced chip for USB 2.0 and has drivers for
> that on the disc. Vista only sees the chipset as a 7001 (usb 1.1) chipset.
> by the hardware list the 7002 USB 2.0 should be loaded but if I manually
> change them they show a hardware problem and revert back to the 7001 chip
> doing a driver update.. any ideas on how to resolve this? any help would be
> great
>