Need help setting up RAID 1

Hello everyone,

Noob person needs help setting up RAID 1. I have the following hardware
and I would like some help in turning this into a RAID 1 storage vault.

Two (2) Western Digital Caviar Green 1TB 32MB HD (WD10EADS)
Vantec NexStar MX (NST-400MX-SR)

Switching Jumper 1&2 are ON
Switching Jumper 3&4 are OFF

At the moment, both drives are up and running.

If someone could point me in the right direction (link), that would be
appreciated.

Cheers


--
howwon

http://www.vantecusa.com/front/product/view_detail/370

"howwon" <guest@unknown-email.com> wrote in message
news:81b884d0f51d9f34ada3bfd9d1f1e396@nntp-gateway.com...
>
> Hello everyone,
>
> Noob person needs help setting up RAID 1. I have the following hardware
> and I would like some help in turning this into a RAID 1 storage vault.
>
> Two (2) Western Digital Caviar Green 1TB 32MB HD (WD10EADS)
> Vantec NexStar MX (NST-400MX-SR)
>
> Switching Jumper 1&2 are ON
> Switching Jumper 3&4 are OFF
>
> At the moment, both drives are up and running.
>
> If someone could point me in the right direction (link), that would be
> appreciated.
>
> Cheers
>
>
> --
> howwon

Your link goes to an enclosure that does not handle RAID 1.

DL;960161 Wrote:
> 'Welcome to Vantec – Vantec NexStar MX - NST-400MX-UFB - Dual 3.5''
> SATA to USB 2.0 and eSATA with Individual/JBOD/RAID 0 External Hard
> Drive Enclosure'
> (http://www.vantecusa.com/front/product/view_detail/370)
>
> "howwon" <guest@xxxxxx-email.com> wrote in message
> news:81b884d0f51d9f34ada3bfd9d1f1e396@xxxxxx-gateway.com...> > >
> > >
> > > Hello everyone,
> > >
> > > Noob person needs help setting up RAID 1. I have the following
> > hardware
> > > and I would like some help in turning this into a RAID 1 storage
> > vault.
> > >
> > > Two (2) Western Digital Caviar Green 1TB 32MB HD (WD10EADS)
> > > Vantec NexStar MX (NST-400MX-SR)
> > >
> > > Switching Jumper 1&2 are ON
> > > Switching Jumper 3&4 are OFF
> > >
> > > At the moment, both drives are up and running.
> > >
> > > If someone could point me in the right direction (link), that would
> > be
> > > appreciated.
> > >
> > > Cheers
> > >
> > >
> > > --
> > > howwon > >


--
howwon

I simply picked the Vantec page that appeared to resemble the enclosure you
have, If it doesnt support raid 1 you would appear to be SOL

If you are using any usb enclosure, for other than data backup, then there
is likely to be a bottle neck in the connection

"howwon" <guest@unknown-email.com> wrote in message
news:f43c5c863f73a56b115b0d96637f70cd@nntp-gateway.com...
>
> Your link goes to an enclosure that does not handle RAID 1.
>
> DL;960161 Wrote:
>> 'Welcome to Vantec â?" Vantec NexStar MX - NST-400MX-UFB - Dual 3.5''
>> SATA to USB 2.0 and eSATA with Individual/JBOD/RAID 0 External Hard
>> Drive Enclosure'
>> (http://www.vantecusa.com/front/product/view_detail/370)
>>
>> "howwon" <guest@xxxxxx-email.com> wrote in message
>> news:81b884d0f51d9f34ada3bfd9d1f1e396@xxxxxx-gateway.com...> > >
>> > >
>> > > Hello everyone,
>> > >
>> > > Noob person needs help setting up RAID 1. I have the following
>> > hardware
>> > > and I would like some help in turning this into a RAID 1 storage
>> > vault.
>> > >
>> > > Two (2) Western Digital Caviar Green 1TB 32MB HD (WD10EADS)
>> > > Vantec NexStar MX (NST-400MX-SR)
>> > >
>> > > Switching Jumper 1&2 are ON
>> > > Switching Jumper 3&4 are OFF
>> > >
>> > > At the moment, both drives are up and running.
>> > >
>> > > If someone could point me in the right direction (link), that would
>> > be
>> > > appreciated.
>> > >
>> > > Cheers
>> > >
>> > >
>> > > --
>> > > howwon > >
>
>
> --
> howwon

The enclosure that I have, Vantec NexStar MX (NST-400MX-SR), does
support RAID 1. I am looking for guidance on how to set this up.

DL;961003 Wrote:
> I simply picked the Vantec page that appeared to resemble the enclosure
> you
> have, If it doesnt support raid 1 you would appear to be SOL
>
> If you are using any usb enclosure, for other than data backup, then
> there
> is likely to be a bottle neck in the connection
>
> "howwon" <guest@xxxxxx-email.com> wrote in message
> news:f43c5c863f73a56b115b0d96637f70cd@xxxxxx-gateway.com...> > >
> > >
> > > Your link goes to an enclosure that does not handle RAID 1.
> > >
> > > DL;960161 Wrote:> > > > >
> > > >> 'Welcome to Vantec â?" Vantec NexStar MX - NST-400MX-UFB - Dual
> > > 3.5''
> > > >> SATA to USB 2.0 and eSATA with Individual/JBOD/RAID 0 External Hard
> > > >> Drive Enclosure'
> > > >> ('Welcome to Vantec – Vantec NexStar MX - NST-400MX-UFB - Dual
> > > 3.5'' SATA to USB 2.0 and eSATA with Individual/JBOD/RAID 0 External
> > > Hard Drive Enclosure'
> > > (http://www.vantecusa.com/front/product/view_detail/370))
> > > >>
> > > >> "howwon" <guest@xxxxxx-email.com> wrote in message
> > > >> news:81b884d0f51d9f34ada3bfd9d1f1e396@xxxxxx-gateway.com...> > >> > > >
> > >
> > >
> > > --
> > > howwon > >


--
howwon

How about going through this:

http://www.vantecusa.com/system/appl...ser_manual.pdf



--
David Vair
CNE, CNA, MCP, A+, N+



"howwon" <guest@unknown-email.com> wrote in message
news:1d16ea060211231554c40ded57d4b4b3@nntp-gateway.com...
>
> The enclosure that I have, Vantec NexStar MX (NST-400MX-SR), does
> support RAID 1. I am looking for guidance on how to set this up.
>
> DL;961003 Wrote:
>> I simply picked the Vantec page that appeared to resemble the enclosure
>> you
>> have, If it doesnt support raid 1 you would appear to be SOL
>>
>> If you are using any usb enclosure, for other than data backup, then
>> there
>> is likely to be a bottle neck in the connection
>>
>> "howwon" <guest@xxxxxx-email.com> wrote in message
>> news:f43c5c863f73a56b115b0d96637f70cd@xxxxxx-gateway.com...> > >
>> > >
>> > > Your link goes to an enclosure that does not handle RAID 1.
>> > >
>> > > DL;960161 Wrote:> > > > >
>> > > >> 'Welcome to Vantec â?" Vantec NexStar MX - NST-400MX-UFB - Dual
>> > > 3.5''
>> > > >> SATA to USB 2.0 and eSATA with Individual/JBOD/RAID 0 External
>> > > >> Hard
>> > > >> Drive Enclosure'
>> > > >> ('Welcome to Vantec â?" Vantec NexStar MX - NST-400MX-UFB - Dual
>> > > 3.5'' SATA to USB 2.0 and eSATA with Individual/JBOD/RAID 0 External
>> > > Hard Drive Enclosure'
>> > > (http://www.vantecusa.com/front/product/view_detail/370))
>> > > >>
>> > > >> "howwon" <guest@xxxxxx-email.com> wrote in message
>> > > >> news:81b884d0f51d9f34ada3bfd9d1f1e396@xxxxxx-gateway.com...> > >>
>> > > >> > > >
>> > >
>> > >
>> > > --
>> > > howwon > >
>
>
> --
> howwon