Microsoft Windows Vista Community Forums - Vistaheads
Recommended Download



Welcome to the Microsoft Windows Vista Community Forums - Vistaheads, YOUR Largest Resource for Windows Vista related information.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so , join our community today!

If you have any problems with the registration process or your account login, please contact us.

Driver Scanner

Wireless Mouse not functioning

microsoft.public.windows.vista hardware devices






Speedup My PC
Reply
  #1 (permalink)  
Old 01-07-2009
Mike92
 

Posts: n/a
Wireless Mouse not functioning

I had a wireless mouse that came with my PC and then suddenly after a
while it just stopped working and all it does when I put batteries in
it, is flash it's little red light. I press the 'connect' button on the
bottom of it but to no avail. I don't even think it's installed
correctly or something like that. It's been a while since it stopped
working. I'm not sure if I have the hand manuels for this wireless mouse
either, I'll have to look if it's required to fix it.

I'm just using a Wheel Mouse Optical USB and PS/2 Compatible in the
place of the 'broken' wireless mouse.

I'll probably just buy a new one but was wondering if there was a way
to make sure it was broken at least? I mean like where specifically can
I go to find the install directories (if that is something to look for)?


Or rather, how can I make my PC pick up the signal when I press the
'connect' button on the bottom of the mouse? It appears that a receiver
is built into the PC since whenever I use the Media Center 'remote' that
also came with my PC, a light flashes on the PC as if it was the
receiver. Am I making sense lol??

Model No. MR-0601T
Power Rating: 3V 50mA
Serial No. 7L23600174B
Version: TP
FCC ID: E8HMR-0601T

Great! Thank You Very Much


--
Mike92

If you enjoy what you do, you'll never work another day in your life.

-Master Kung
Reply With Quote
Sponsored Links
  #2 (permalink)  
Old 01-09-2009
Andrew Murray
 

Posts: n/a
Re: Wireless Mouse not functioning
Is this a laptop or PC? Can you provide full specs of the machine -
including Make and Model, also provide the operating system you're using.

Is this mouse a "generic" mouse or "branded" the same as the PC make (e.g.
Acer/Dell/HP) or is it a brand such as Microsoft or Logitech?

Generally a wireless mouse requires a receiver, that plugs into a USB port.
See the product below on www.ht.com.au:

http://www.ht.com.au/keyword/Wireles...ack/detail.hts

You mention a built-in receiver - which I suspect is not actually for the
mouse, but for the Remote control (for Media Centre/TV) and another
receiver/transmitter that enables your wireless internet (if you use that).




"Mike92" <guest@unknown-email.com> wrote in message
news:2b6f03085eeb5cff124d838e7b4c7bea@nntp-gateway.com...
>
> I had a wireless mouse that came with my PC and then suddenly after a
> while it just stopped working and all it does when I put batteries in
> it, is flash it's little red light. I press the 'connect' button on the
> bottom of it but to no avail. I don't even think it's installed
> correctly or something like that. It's been a while since it stopped
> working. I'm not sure if I have the hand manuels for this wireless mouse
> either, I'll have to look if it's required to fix it.
>
> I'm just using a Wheel Mouse Optical USB and PS/2 Compatible in the
> place of the 'broken' wireless mouse.
>
> I'll probably just buy a new one but was wondering if there was a way
> to make sure it was broken at least? I mean like where specifically can
> I go to find the install directories (if that is something to look for)?
>
>
> Or rather, how can I make my PC pick up the signal when I press the
> 'connect' button on the bottom of the mouse? It appears that a receiver
> is built into the PC since whenever I use the Media Center 'remote' that
> also came with my PC, a light flashes on the PC as if it was the
> receiver. Am I making sense lol??
>
> Model No. MR-0601T
> Power Rating: 3V 50mA
> Serial No. 7L23600174B
> Version: TP
> FCC ID: E8HMR-0601T
>
> Great! Thank You Very Much
>
>
> --
> Mike92
>
> If you enjoy what you do, you'll never work another day in your life.
>
> -Master Kung


Reply With Quote
  #3 (permalink)  
Old 01-10-2009
Mike92
 

Posts: n/a
Re: Wireless Mouse not functioning

COMPUTER MODEL: GM5664
COMPUTER MANUFACTURER: GATEWAY
OS NAME: MICROSOFT® WINDOWS VISTA™ HOME PREMIUM
|C:\WINDOWS|\DEVICE\HARDDISK0\PARTITION2

OS VERSION: 6.0.6001
SYSTEM TYPE: X86-BASED PC
TOTAL PHYSICAL MEMORY: 3070 MB
WINDOWS DIRECTORY: C:\WINDOWS
BIOS VERSION: )PHOENIX - AWARD WORKSTATIONBIOS V6.00PG
CPU: AMD PHENOM(TM) 9600 QUAD-CORE PROCESSOR
VIDEO CARD: ATI RADEON HD 2400 XT
RESOLUTION: 1680 X 1050 X 4294967296 COLORS
That sufficient? Thank you, you probably could not view my specs
because you are a guest, I apologize. Thank you for any advice you can
give.



Andrew Murray;933974 Wrote:
> Is this a laptop or PC? Can you provide full specs of the machine -
> including Make and Model, also provide the operating system you're
> using.
>
> Is this mouse a "generic" mouse or "branded" the same as the PC make
> (e.g.
> Acer/Dell/HP) or is it a brand such as Microsoft or Logitech?
>
> Generally a wireless mouse requires a receiver, that plugs into a USB
> port.
> See the product below on 'www.ht.com.au:' (http://www.ht.com.au:)
>
> 'ht.com.au | Logitech V220 Cordless Optical Mouse for Notebooks - Mouse
> - optical - wireless - RF - USB wireless receiver - black'
> (http://www.ht.com.au/keyword/Wireles...ack/detail.hts)
>
> You mention a built-in receiver - which I suspect is not actually for
> the
> mouse, but for the Remote control (for Media Centre/TV) and another
> receiver/transmitter that enables your wireless internet (if you use
> that).
>
>
>
>
> "Mike92" <guest@xxxxxx-email.com> wrote in message
> news:2b6f03085eeb5cff124d838e7b4c7bea@xxxxxx-gateway.com...> > >
> > >
> > > I had a wireless mouse that came with my PC and then suddenly after a
> > > while it just stopped working and all it does when I put batteries in
> > > it, is flash it's little red light. I press the 'connect' button on

> > the
> > > bottom of it but to no avail. I don't even think it's installed
> > > correctly or something like that. It's been a while since it stopped
> > > working. I'm not sure if I have the hand manuels for this wireless

> > mouse
> > > either, I'll have to look if it's required to fix it.
> > >
> > > I'm just using a Wheel Mouse Optical USB and PS/2 Compatible in the
> > > place of the 'broken' wireless mouse.
> > >
> > > I'll probably just buy a new one but was wondering if there was a way
> > > to make sure it was broken at least? I mean like where specifically

> > can
> > > I go to find the install directories (if that is something to look

> > for)?
> > >
> > >
> > > Or rather, how can I make my PC pick up the signal when I press the
> > > 'connect' button on the bottom of the mouse? It appears that a

> > receiver
> > > is built into the PC since whenever I use the Media Center 'remote'

> > that
> > > also came with my PC, a light flashes on the PC as if it was the
> > > receiver. Am I making sense lol??
> > >
> > > Model No. MR-0601T
> > > Power Rating: 3V 50mA
> > > Serial No. 7L23600174B
> > > Version: TP
> > > FCC ID: E8HMR-0601T
> > >
> > > Great! Thank You Very Much
> > >
> > >
> > > --
> > > Mike92
> > >
> > > If you enjoy what you do, you'll never work another day in your life.
> > >
> > > -Master Kung > >



--
Mike92

If you enjoy what you do, you'll never work another day in your life.

-Master Kung
Reply With Quote
  #4 (permalink)  
Old 01-10-2009
Mike92
 

Posts: n/a
Re: Wireless Mouse not functioning

Ok problem solved, it was soo simple of a task too...just had to press
the connect button on the bottom of the mouse and then press the one on
the receiver...heh..and that was it!!

Mike92;931908 Wrote:
> I had a wireless mouse that came with my PC and then suddenly after a
> while it just stopped working and all it does when I put batteries in
> it, is flash it's little red light. I press the 'connect' button on the
> bottom of it but to no avail. I don't even think it's installed
> correctly or something like that. It's been a while since it stopped
> working. I'm not sure if I have the hand manuels for this wireless mouse
> either, I'll have to look if it's required to fix it.
>
> I'm just using a Wheel Mouse Optical USB and PS/2 Compatible in the
> place of the 'broken' wireless mouse.
>
> I'll probably just buy a new one but was wondering if there was a way
> to make sure it was broken at least? I mean like where specifically can
> I go to find the install directories (if that is something to look for)?
>
>
> Or rather, how can I make my PC pick up the signal when I press the
> 'connect' button on the bottom of the mouse? It appears that a receiver
> is built into the PC since whenever I use the Media Center 'remote' that
> also came with my PC, a light flashes on the PC as if it was the
> receiver. Am I making sense lol??
>
> Model No. MR-0601T
> Power Rating: 3V 50mA
> Serial No. 7L23600174B
> Version: TP
> FCC ID: E8HMR-0601T
>
> Great! Thank You Very Much



--
Mike92

If you enjoy what you do, you'll never work another day in your life.

-Master Kung
Reply With Quote
  #5 (permalink)  
Old 01-12-2009
Andrew Murray
 

Posts: n/a
Re: Wireless Mouse not functioning
I'm using a newsreader, not the web interface.

"Mike92" <guest@unknown-email.com> wrote in message
news:7d7f8922f9781949103b99916b7f2fc7@nntp-gateway.com...
>
> COMPUTER MODEL: GM5664
> COMPUTER MANUFACTURER: GATEWAY
> OS NAME: MICROSOFT® WINDOWS VISTAT HOME PREMIUM
> |C:\WINDOWS|\DEVICE\HARDDISK0\PARTITION2
>
> OS VERSION: 6.0.6001
> SYSTEM TYPE: X86-BASED PC
> TOTAL PHYSICAL MEMORY: 3070 MB
> WINDOWS DIRECTORY: C:\WINDOWS
> BIOS VERSION: )PHOENIX - AWARD WORKSTATIONBIOS V6.00PG
> CPU: AMD PHENOM(TM) 9600 QUAD-CORE PROCESSOR
> VIDEO CARD: ATI RADEON HD 2400 XT
> RESOLUTION: 1680 X 1050 X 4294967296 COLORS
> That sufficient? Thank you, you probably could not view my specs
> because you are a guest, I apologize. Thank you for any advice you can
> give.
>
>
>
> Andrew Murray;933974 Wrote:
>> Is this a laptop or PC? Can you provide full specs of the machine -
>> including Make and Model, also provide the operating system you're
>> using.
>>
>> Is this mouse a "generic" mouse or "branded" the same as the PC make
>> (e.g.
>> Acer/Dell/HP) or is it a brand such as Microsoft or Logitech?
>>
>> Generally a wireless mouse requires a receiver, that plugs into a USB
>> port.
>> See the product below on 'www.ht.com.au:' (http://www.ht.com.au:)
>>
>> 'ht.com.au | Logitech V220 Cordless Optical Mouse for Notebooks - Mouse
>> - optical - wireless - RF - USB wireless receiver - black'
>> (http://www.ht.com.au/keyword/Wireles...ack/detail.hts)
>>
>> You mention a built-in receiver - which I suspect is not actually for
>> the
>> mouse, but for the Remote control (for Media Centre/TV) and another
>> receiver/transmitter that enables your wireless internet (if you use
>> that).
>>
>>
>>
>>
>> "Mike92" <guest@xxxxxx-email.com> wrote in message
>> news:2b6f03085eeb5cff124d838e7b4c7bea@xxxxxx-gateway.com...> > >
>> > >
>> > > I had a wireless mouse that came with my PC and then suddenly after a
>> > > while it just stopped working and all it does when I put batteries in
>> > > it, is flash it's little red light. I press the 'connect' button on
>> > the
>> > > bottom of it but to no avail. I don't even think it's installed
>> > > correctly or something like that. It's been a while since it stopped
>> > > working. I'm not sure if I have the hand manuels for this wireless
>> > mouse
>> > > either, I'll have to look if it's required to fix it.
>> > >
>> > > I'm just using a Wheel Mouse Optical USB and PS/2 Compatible in the
>> > > place of the 'broken' wireless mouse.
>> > >
>> > > I'll probably just buy a new one but was wondering if there was a way
>> > > to make sure it was broken at least? I mean like where specifically
>> > can
>> > > I go to find the install directories (if that is something to look
>> > for)?
>> > >
>> > >
>> > > Or rather, how can I make my PC pick up the signal when I press the
>> > > 'connect' button on the bottom of the mouse? It appears that a
>> > receiver
>> > > is built into the PC since whenever I use the Media Center 'remote'
>> > that
>> > > also came with my PC, a light flashes on the PC as if it was the
>> > > receiver. Am I making sense lol??
>> > >
>> > > Model No. MR-0601T
>> > > Power Rating: 3V 50mA
>> > > Serial No. 7L23600174B
>> > > Version: TP
>> > > FCC ID: E8HMR-0601T
>> > >
>> > > Great! Thank You Very Much
>> > >
>> > >
>> > > --
>> > > Mike92
>> > >
>> > > If you enjoy what you do, you'll never work another day in your life.
>> > >
>> > > -Master Kung > >

>
>
> --
> Mike92
>
> If you enjoy what you do, you'll never work another day in your life.
>
> -Master Kung


Reply With Quote
  #6 (permalink)  
Old 04-12-2009
remoteagents
 

Posts: n/a
Re: Wireless Mouse not functioning

If the wireless mouse is not functioning the best thing we can do is do
a power drain on the laptop and select Last Known good configuration,
and check the setting of the mouse, It will be functioning.
If it still doesn't work just power off the wireless mouse and keyboard
from USB and restart the same,

That's it will be functioning....

Regards,
Sandeep Kumar Seeram
s'andeep@remoteagents.org' (sandeep@remoteagents.org)


--
remoteagents
Reply With Quote
  #7 (permalink)  
Old 04-12-2009
John Huecksteadt
 

Posts: n/a
Re: Wireless Mouse not functioning
Thanks, Sandeep. The mouse is functioning, but

1) Rotating the wheel does not scroll content (pages, lines, etc.)
2) One cannot assign "Double-click" to a wheel press
3) One cannot automatically position the cursor the the default button in
new dialog boxes

These are all desired features in the Intellipoint software in question. I
hope this clarifies my post. Thank you. -John

"remoteagents" <guest@unknown-email.com> wrote in message
news:2b7b8ada9e6a6add0ddcfe423c7c4ff9@nntp-gateway.com...
>
> If the wireless mouse is not functioning the best thing we can do is do
> a power drain on the laptop and select Last Known good configuration,
> and check the setting of the mouse, It will be functioning.
> If it still doesn't work just power off the wireless mouse and keyboard
> from USB and restart the same,
>
> That's it will be functioning....
>
> Regards,
> Sandeep Kumar Seeram
> s'andeep@remoteagents.org' (sandeep@remoteagents.org)
>
>
> --
> remoteagents


Reply With Quote
  #8 (permalink)  
Old 04-13-2009
Bogey Man
 

Posts: n/a
Re: Wireless Mouse not functioning
It sounds like your mouse driver is corrupted.

"John Huecksteadt" <johnh@beecreek.net> wrote in message
news:e6ITd86uJHA.1916@TK2MSFTNGP02.phx.gbl...
> Thanks, Sandeep. The mouse is functioning, but
>
> 1) Rotating the wheel does not scroll content (pages, lines, etc.)
> 2) One cannot assign "Double-click" to a wheel press
> 3) One cannot automatically position the cursor the the default button
> in new dialog boxes
>
> These are all desired features in the Intellipoint software in question. I
> hope this clarifies my post. Thank you. -John
>
> "remoteagents" <guest@unknown-email.com> wrote in message
> news:2b7b8ada9e6a6add0ddcfe423c7c4ff9@nntp-gateway.com...
>>
>> If the wireless mouse is not functioning the best thing we can do is do
>> a power drain on the laptop and select Last Known good configuration,
>> and check the setting of the mouse, It will be functioning.
>> If it still doesn't work just power off the wireless mouse and keyboard
>> from USB and restart the same,
>>
>> That's it will be functioning....
>>
>> Regards,
>> Sandeep Kumar Seeram
>> s'andeep@remoteagents.org' (sandeep@remoteagents.org)
>>
>>
>> --
>> remoteagents

>

Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
wireless mouse angel81fire microsoft.public.windows.vista hardware devices 6 06-24-2008 00:39
mouse not functioning after upgrade of vista rowdy123 microsoft.public.windows.vista hardware devices 2 04-13-2008 21:38
mouse driver not functioning papapaul microsoft.public.windows.vista hardware devices 4 02-28-2008 19:02
wireless mouse steve microsoft.public.windows.vista hardware devices 1 01-26-2008 03:52
Wireless mouse ClaireG microsoft.public.windows.vista.mail 1 09-26-2007 18:41




All times are GMT +1. The time now is 08:14.




Driver Scanner - Free Scan Now

Vistaheads.com is part of the Heads Network. See also XPHeads.com , Win7Heads.com and Win8Heads.com.


Design by Vjacheslav Trushkin for phpBBStyles.com.
Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 RC 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120