
05-31-2007
|
|
|
|
RE: re.dvd rom missing
I have exactly the same problem as you do!
What I did back then was change the jumper settings to Cable Select for both
drives (before I had Master / Slave Jumper). This did the trick, but then
after a month I had the same problem again, even with System Restore I
couldn't get it to work. I have no clue what to do now.
"Martyn Woodfield" wrote:
> I have 1 pioneer DVD Writer and 1 Sony DVD Rom installed on Windows Vista
> Ultimate on a fresh install. The Motherboard is an Abit IC7 Max 3. My
> problem being that the Bios see both DVD drives on the Secondary Ribbon
> i.e. Master and Slave and when the Windows Vista installation is complete
> both drives are visible to Vista but when I reboot the system and Vista
> restarts then Vista always loses 1 of the DVD drives and only shows 1
> installed. If I go to device manager and scan for hardware changes then the
> lost drive reappears but again as soon as the computer is rebooted then
> Windows Vista loses it again. Any thoughts on this problem.
>
> Thanks Martyn.
>
>
|