Scanjet 3800 connected to Pavilion 6105a.de doesn´t scan

Installation of the german software included in setup_full_3800.exe (from
15th May 2007) for windows vista on a pavilion 6105.a works fine
(virusscanner/firewall disabled). After the installation I connected the
Scanjet 3800 via usb to the pavilion 6105.a and the scanner was detected by
the operating system. Everything seems fine, but scanning is not possible
(no error message). After pressing the scan button of the scanner HP
Scanning is launched. But after selecting the scan button in this
applikation nothing happens (no error message, no scan, simply nothing). The
scanner works fine with compaq nx8220 and vista business operation system,
the same software (from 15th May 2007) and installation procedure.

How to get the scanner running with pavilion 6105a.de and vista home
premium?

Thank you,

Dirk Lehmann

Hello,

how about remove Scanjet 3800 driver and then reinstall it via administrator
privilege.



"Dirk Lehmann" wrote:

> Installation of the german software included in setup_full_3800.exe (from
> 15th May 2007) for 6105.a workwindows vista on a pavilion s fine
> (virusscanner/firewall disabled). After the installation I connected the
> Scanjet 3800 via usb to the pavilion 6105.a and the scanner was detected by
> the operating system. Everything seems fine, but scanning is not possible
> (no error message). After pressing the scan button of the scanner HP
> Scanning is launched. But after selecting the scan button in this
> applikation nothing happens (no error message, no scan, simply nothing). The
> scanner works fine with compaq nx8220 and vista business operation system,
> the same software (from 15th May 2007) and installation procedure.
>
> How to get the scanner running with pavilion 6105a.de and vista home
> premium?
>
> Thank you,
>
> Dirk Lehmann
>

Hello,

I have done this allready. Scanner doesn´t scan.

Thank you.

Dirk

"Randy" <Randy@discussions.microsoft.com> schrieb im Newsbeitrag
news:85634427-64F6-4391-89BC-F17B792946AB@microsoft.com...
> Hello,
>
> how about remove Scanjet 3800 driver and then reinstall it via
> administrator
> privilege.
>
>
>
> "Dirk Lehmann" wrote:
>
>> Installation of the german software included in setup_full_3800.exe (from
>> 15th May 2007) for 6105.a workwindows vista on a pavilion s fine
>> (virusscanner/firewall disabled). After the installation I connected the
>> Scanjet 3800 via usb to the pavilion 6105.a and the scanner was detected
>> by
>> the operating system. Everything seems fine, but scanning is not possible
>> (no error message). After pressing the scan button of the scanner HP
>> Scanning is launched. But after selecting the scan button in this
>> applikation nothing happens (no error message, no scan, simply nothing).
>> The
>> scanner works fine with compaq nx8220 and vista business operation
>> system,
>> the same software (from 15th May 2007) and installation procedure.
>>
>> How to get the scanner running with pavilion 6105a.de and vista home
>> premium?
>>
>> Thank you,
>>
>> Dirk Lehmann
>>

Hi,

You can refer to the following hp webiste to check your printer, first.

http://h20000.www2.hp.com/bizsupport...eriesId=460531

If that doesn't work, you have to run vista in Selective Startup mode, and
check it if the Scanjet 3800 works in that mode.

Selective Startup mode
http://windowshelp.microsoft.com/Win...6d71a1033.mspx


"Randy" wrote:

> Hello,
>
> how about remove Scanjet 3800 driver and then reinstall it via administrator
> privilege.
>
>
>
> "Dirk Lehmann" wrote:
>
> > Installation of the german software included in setup_full_3800.exe (from
> > 15th May 2007) for 6105.a workwindows vista on a pavilion s fine
> > (virusscanner/firewall disabled). After the installation I connected the
> > Scanjet 3800 via usb to the pavilion 6105.a and the scanner was detected by
> > the operating system. Everything seems fine, but scanning is not possible
> > (no error message). After pressing the scan button of the scanner HP
> > Scanning is launched. But after selecting the scan button in this
> > applikation nothing happens (no error message, no scan, simply nothing). The
> > scanner works fine with compaq nx8220 and vista business operation system,
> > the same software (from 15th May 2007) and installation procedure.
> >
> > How to get the scanner running with pavilion 6105a.de and vista home
> > premium?
> >
> > Thank you,
> >
> > Dirk Lehmann
> >