Sapphire Radeon 9600 Pro Atlantis - Driver wont load (Error 43)

I just want to ask did you solve your problem
if you are how did you do it??
I have the same problem
Windows has stopped this device because it has reported problems. (Code 43) Pls help!
Thx to all!

EggHeadCafe.com - .NET Developer Portal of Choice
http://www.eggheadcafe.com

I just want to ask did you solve your problem
if you are how did you do it??
I have the same problem
Windows has stopped this device because it has reported problems. (Code 43) Pls help!
Thx to all!

EggHeadCafe.com - .NET Developer Portal of Choice
http://www.eggheadcafe.com

Hey all, I'm running Windows Vista Build 6000... my Sapphire Radeon 9600 Pro
Atlantis video card driver will not load, the error info is below:

Description:
Windows was able to successfully install device driver software, but the
driver software encountered a problem when it tried to run. The problem code
is 43.

Problem signature:
Problem Event Name: PnPDeviceProblemCode
Architecture: x86
Hardware Id: PCI\VEN_1002&DEV_4150&SUBSYS_0200174B&REV_00
Setup class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
PnP problem code: 0000002B
Driver name: atikmdag.sys
Driver version: 7.1.1.537
Driver date: 12-05-2006
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033

I've tried the windows driver, and the AMD driver.... both yeild the same
result (error 43). I tried installing and uninstalling the Catalyst Control
Center several times... sometimes just the driver without the CCC. I've
actually never been able to run the CCC, I click on it and it wont start up.
I've been working on this for two days straight now... there sure seems to be
a lot of problems with video cards and vista... argh! Any help would be
greatly appreciated.

Thanks!

Ty

is the "windows driver" youre trying made for vista? im thinking probably
not.
that would be the problem if its not



"TyMitton" <TyMitton@discussions.microsoft.com> wrote in message
news:F74C6BFE-2B59-427F-93B5-7D9B40FBDEEC@microsoft.com...
> Hey all, I'm running Windows Vista Build 6000... my Sapphire Radeon 9600
> Pro
> Atlantis video card driver will not load, the error info is below:
>
> Description:
> Windows was able to successfully install device driver software, but the
> driver software encountered a problem when it tried to run. The problem
> code
> is 43.
>
> Problem signature:
> Problem Event Name: PnPDeviceProblemCode
> Architecture: x86
> Hardware Id: PCI\VEN_1002&DEV_4150&SUBSYS_0200174B&REV_00
> Setup class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
> PnP problem code: 0000002B
> Driver name: atikmdag.sys
> Driver version: 7.1.1.537
> Driver date: 12-05-2006
> OS Version: 6.0.6000.2.0.0.256.1
> Locale ID: 1033
>
> I've tried the windows driver, and the AMD driver.... both yeild the same
> result (error 43). I tried installing and uninstalling the Catalyst
> Control
> Center several times... sometimes just the driver without the CCC. I've
> actually never been able to run the CCC, I click on it and it wont start
> up.
> I've been working on this for two days straight now... there sure seems to
> be
> a lot of problems with video cards and vista... argh! Any help would be
> greatly appreciated.
>
> Thanks!
>
> Ty
>
>

TyMitton

The ATI drivers are still in beta.
If you want to try the Beta driver & CCC you will
have to uninstall all ATI drivers from you system
then install the beta driver.
Some functionality is disabled in the Beta drivers.

Best I can do, sorry.

'''''''''''''''''''''''''''''''''''''''''''''''''' '''''''''''''''''''''''''''''''''''''''''''''''''' ''''''

"TyMitton" wrote:

> Hey all, I'm running Windows Vista Build 6000... my Sapphire Radeon 9600 Pro
> Atlantis video card driver will not load, the error info is below:
>
> Description:
> Windows was able to successfully install device driver software, but the
> driver software encountered a problem when it tried to run. The problem code
> is 43.
>
> Problem signature:
> Problem Event Name: PnPDeviceProblemCode
> Architecture: x86
> Hardware Id: PCI\VEN_1002&DEV_4150&SUBSYS_0200174B&REV_00
> Setup class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
> PnP problem code: 0000002B
> Driver name: atikmdag.sys
> Driver version: 7.1.1.537
> Driver date: 12-05-2006
> OS Version: 6.0.6000.2.0.0.256.1
> Locale ID: 1033
>
> I've tried the windows driver, and the AMD driver.... both yeild the same
> result (error 43). I tried installing and uninstalling the Catalyst Control
> Center several times... sometimes just the driver without the CCC. I've
> actually never been able to run the CCC, I click on it and it wont start up.
> I've been working on this for two days straight now... there sure seems to be
> a lot of problems with video cards and vista... argh! Any help would be
> greatly appreciated.
>
> Thanks!
>
> Ty
>
>

Hi,

I've had no problems using the ATI/AMD beta drivers with this card

--
--Jonathan Maltz [Microsoft MVP - Windows Server - IIS, Virtual PC]
http://www.visualwin.com - A Windows Server 2003 visual, step-by-step
tutorial site :-)
http://vpc.visualwin.com - Does <insert OS name> work on VPC 2004? Find out
here
Only reply by newsgroup. I do not do technical support via email. Any
emails I have not authorized are deleted before I see them.


"TyMitton" <TyMitton@discussions.microsoft.com> wrote in message
news:F74C6BFE-2B59-427F-93B5-7D9B40FBDEEC@microsoft.com...
> Hey all, I'm running Windows Vista Build 6000... my Sapphire Radeon 9600
> Pro
> Atlantis video card driver will not load, the error info is below:
>
> Description:
> Windows was able to successfully install device driver software, but the
> driver software encountered a problem when it tried to run. The problem
> code
> is 43.
>
> Problem signature:
> Problem Event Name: PnPDeviceProblemCode
> Architecture: x86
> Hardware Id: PCI\VEN_1002&DEV_4150&SUBSYS_0200174B&REV_00
> Setup class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
> PnP problem code: 0000002B
> Driver name: atikmdag.sys
> Driver version: 7.1.1.537
> Driver date: 12-05-2006
> OS Version: 6.0.6000.2.0.0.256.1
> Locale ID: 1033
>
> I've tried the windows driver, and the AMD driver.... both yeild the same
> result (error 43). I tried installing and uninstalling the Catalyst
> Control
> Center several times... sometimes just the driver without the CCC. I've
> actually never been able to run the CCC, I click on it and it wont start
> up.
> I've been working on this for two days straight now... there sure seems to
> be
> a lot of problems with video cards and vista... argh! Any help would be
> greatly appreciated.
>
> Thanks!
>
> Ty
>
>

....to continue my previous post, are you using the Vista drivers from the
Vista section of the ATI site?

--
--Jonathan Maltz [Microsoft MVP - Windows Server - IIS, Virtual PC]
http://www.visualwin.com - A Windows Server 2003 visual, step-by-step
tutorial site :-)
http://vpc.visualwin.com - Does <insert OS name> work on VPC 2004? Find out
here
Only reply by newsgroup. I do not do technical support via email. Any
emails I have not authorized are deleted before I see them.


"TyMitton" <TyMitton@discussions.microsoft.com> wrote in message
news:F74C6BFE-2B59-427F-93B5-7D9B40FBDEEC@microsoft.com...
> Hey all, I'm running Windows Vista Build 6000... my Sapphire Radeon 9600
> Pro
> Atlantis video card driver will not load, the error info is below:
>
> Description:
> Windows was able to successfully install device driver software, but the
> driver software encountered a problem when it tried to run. The problem
> code
> is 43.
>
> Problem signature:
> Problem Event Name: PnPDeviceProblemCode
> Architecture: x86
> Hardware Id: PCI\VEN_1002&DEV_4150&SUBSYS_0200174B&REV_00
> Setup class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
> PnP problem code: 0000002B
> Driver name: atikmdag.sys
> Driver version: 7.1.1.537
> Driver date: 12-05-2006
> OS Version: 6.0.6000.2.0.0.256.1
> Locale ID: 1033
>
> I've tried the windows driver, and the AMD driver.... both yeild the same
> result (error 43). I tried installing and uninstalling the Catalyst
> Control
> Center several times... sometimes just the driver without the CCC. I've
> actually never been able to run the CCC, I click on it and it wont start
> up.
> I've been working on this for two days straight now... there sure seems to
> be
> a lot of problems with video cards and vista... argh! Any help would be
> greatly appreciated.
>
> Thanks!
>
> Ty
>
>

Hey, thanks for the replies. Yes, I'm using the Vista drivers... downloaded
from the vista section of the ATI site.

To respond to Troy, the Windows driver I tried is one the Windows Vista
installed itself... so I'm assuming it's for Vista.

And to respond to LoneWolf... before I install the ATI beta driver, I
uninstall the current driver, but Vista seems to auto detect it and start
re-installing the windows driver almost right away. I have however been
successful in getting the beta driver to install, but it wont load properly
(gives the error 43)... and I've never gotten the CCC to run... I just click
on it and nothing happens.

So, I'm still searching for help.... hopefully I missing something.

Thanks guys!

Ty

"Jonathan Maltz [MS-MVP]" wrote:

> ...to continue my previous post, are you using the Vista drivers from the
> Vista section of the ATI site?
>
> --
> --Jonathan Maltz [Microsoft MVP - Windows Server - IIS, Virtual PC]
> http://www.visualwin.com - A Windows Server 2003 visual, step-by-step
> tutorial site :-)
> http://vpc.visualwin.com - Does <insert OS name> work on VPC 2004? Find out
> here
> Only reply by newsgroup. I do not do technical support via email. Any
> emails I have not authorized are deleted before I see them.
>
>
> "TyMitton" <TyMitton@discussions.microsoft.com> wrote in message
> news:F74C6BFE-2B59-427F-93B5-7D9B40FBDEEC@microsoft.com...
> > Hey all, I'm running Windows Vista Build 6000... my Sapphire Radeon 9600
> > Pro
> > Atlantis video card driver will not load, the error info is below:
> >
> > Description:
> > Windows was able to successfully install device driver software, but the
> > driver software encountered a problem when it tried to run. The problem
> > code
> > is 43.
> >
> > Problem signature:
> > Problem Event Name: PnPDeviceProblemCode
> > Architecture: x86
> > Hardware Id: PCI\VEN_1002&DEV_4150&SUBSYS_0200174B&REV_00
> > Setup class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
> > PnP problem code: 0000002B
> > Driver name: atikmdag.sys
> > Driver version: 7.1.1.537
> > Driver date: 12-05-2006
> > OS Version: 6.0.6000.2.0.0.256.1
> > Locale ID: 1033
> >
> > I've tried the windows driver, and the AMD driver.... both yeild the same
> > result (error 43). I tried installing and uninstalling the Catalyst
> > Control
> > Center several times... sometimes just the driver without the CCC. I've
> > actually never been able to run the CCC, I click on it and it wont start
> > up.
> > I've been working on this for two days straight now... there sure seems to
> > be
> > a lot of problems with video cards and vista... argh! Any help would be
> > greatly appreciated.
> >
> > Thanks!
> >
> > Ty
> >
> >
>

When you removed the old driver, did you check the box
to REMOVE THE DRIVER FILES?


"TyMitton" <TyMitton@discussions.microsoft.com> wrote in message
news:82B77757-EFC0-453A-96FE-7DFB6317AE07@microsoft.com...
| Hey, thanks for the replies. Yes, I'm using the Vista drivers... downloaded
| from the vista section of the ATI site.
|
| To respond to Troy, the Windows driver I tried is one the Windows Vista
| installed itself... so I'm assuming it's for Vista.
|
| And to respond to LoneWolf... before I install the ATI beta driver, I
| uninstall the current driver, but Vista seems to auto detect it and start
| re-installing the windows driver almost right away. I have however been
| successful in getting the beta driver to install, but it wont load properly
| (gives the error 43)... and I've never gotten the CCC to run... I just click
| on it and nothing happens.
|
| So, I'm still searching for help.... hopefully I missing something.
|
| Thanks guys!
|
| Ty
|
| "Jonathan Maltz [MS-MVP]" wrote:
|
| > ...to continue my previous post, are you using the Vista drivers from the
| > Vista section of the ATI site?
| >
| > --
| > --Jonathan Maltz [Microsoft MVP - Windows Server - IIS, Virtual PC]
| > http://www.visualwin.com - A Windows Server 2003 visual, step-by-step
| > tutorial site :-)
| > http://vpc.visualwin.com - Does <insert OS name> work on VPC 2004? Find out
| > here
| > Only reply by newsgroup. I do not do technical support via email. Any
| > emails I have not authorized are deleted before I see them.
| >
| >
| > "TyMitton" <TyMitton@discussions.microsoft.com> wrote in message
| > news:F74C6BFE-2B59-427F-93B5-7D9B40FBDEEC@microsoft.com...
| > > Hey all, I'm running Windows Vista Build 6000... my Sapphire Radeon 9600
| > > Pro
| > > Atlantis video card driver will not load, the error info is below:
| > >
| > > Description:
| > > Windows was able to successfully install device driver software, but the
| > > driver software encountered a problem when it tried to run. The problem
| > > code
| > > is 43.
| > >
| > > Problem signature:
| > > Problem Event Name: PnPDeviceProblemCode
| > > Architecture: x86
| > > Hardware Id: PCI\VEN_1002&DEV_4150&SUBSYS_0200174B&REV_00
| > > Setup class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
| > > PnP problem code: 0000002B
| > > Driver name: atikmdag.sys
| > > Driver version: 7.1.1.537
| > > Driver date: 12-05-2006
| > > OS Version: 6.0.6000.2.0.0.256.1
| > > Locale ID: 1033
| > >
| > > I've tried the windows driver, and the AMD driver.... both yeild the same
| > > result (error 43). I tried installing and uninstalling the Catalyst
| > > Control
| > > Center several times... sometimes just the driver without the CCC. I've
| > > actually never been able to run the CCC, I click on it and it wont start
| > > up.
| > > I've been working on this for two days straight now... there sure seems to
| > > be
| > > a lot of problems with video cards and vista... argh! Any help would be
| > > greatly appreciated.
| > >
| > > Thanks!
| > >
| > > Ty
| > >
| > >
| >

also, the ati driver from thier site made for rtm, is dated dec 15th. I have
had trouble for the past few video versions, where installing the updated
driver does not infact update the driver the system is using, but is just
copying over the files. Usually I will go to device manager, Hit properties
on my card, update driver, then manually point the focus to the directory of
the update driver file. Haven't had a problem doing it this way in both x86
AND x64 versions i have on my box.

"dirty old man" wrote:

> When you removed the old driver, did you check the box
> to REMOVE THE DRIVER FILES?
>
>
> "TyMitton" <TyMitton@discussions.microsoft.com> wrote in message
> news:82B77757-EFC0-453A-96FE-7DFB6317AE07@microsoft.com...
> | Hey, thanks for the replies. Yes, I'm using the Vista drivers... downloaded
> | from the vista section of the ATI site.
> |
> | To respond to Troy, the Windows driver I tried is one the Windows Vista
> | installed itself... so I'm assuming it's for Vista.
> |
> | And to respond to LoneWolf... before I install the ATI beta driver, I
> | uninstall the current driver, but Vista seems to auto detect it and start
> | re-installing the windows driver almost right away. I have however been
> | successful in getting the beta driver to install, but it wont load properly
> | (gives the error 43)... and I've never gotten the CCC to run... I just click
> | on it and nothing happens.
> |
> | So, I'm still searching for help.... hopefully I missing something.
> |
> | Thanks guys!
> |
> | Ty
> |
> | "Jonathan Maltz [MS-MVP]" wrote:
> |
> | > ...to continue my previous post, are you using the Vista drivers from the
> | > Vista section of the ATI site?
> | >
> | > --
> | > --Jonathan Maltz [Microsoft MVP - Windows Server - IIS, Virtual PC]
> | > http://www.visualwin.com - A Windows Server 2003 visual, step-by-step
> | > tutorial site :-)
> | > http://vpc.visualwin.com - Does <insert OS name> work on VPC 2004? Find out
> | > here
> | > Only reply by newsgroup. I do not do technical support via email. Any
> | > emails I have not authorized are deleted before I see them.
> | >
> | >
> | > "TyMitton" <TyMitton@discussions.microsoft.com> wrote in message
> | > news:F74C6BFE-2B59-427F-93B5-7D9B40FBDEEC@microsoft.com...
> | > > Hey all, I'm running Windows Vista Build 6000... my Sapphire Radeon 9600
> | > > Pro
> | > > Atlantis video card driver will not load, the error info is below:
> | > >
> | > > Description:
> | > > Windows was able to successfully install device driver software, but the
> | > > driver software encountered a problem when it tried to run. The problem
> | > > code
> | > > is 43.
> | > >
> | > > Problem signature:
> | > > Problem Event Name: PnPDeviceProblemCode
> | > > Architecture: x86
> | > > Hardware Id: PCI\VEN_1002&DEV_4150&SUBSYS_0200174B&REV_00
> | > > Setup class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
> | > > PnP problem code: 0000002B
> | > > Driver name: atikmdag.sys
> | > > Driver version: 7.1.1.537
> | > > Driver date: 12-05-2006
> | > > OS Version: 6.0.6000.2.0.0.256.1
> | > > Locale ID: 1033
> | > >
> | > > I've tried the windows driver, and the AMD driver.... both yeild the same
> | > > result (error 43). I tried installing and uninstalling the Catalyst
> | > > Control
> | > > Center several times... sometimes just the driver without the CCC. I've
> | > > actually never been able to run the CCC, I click on it and it wont start
> | > > up.
> | > > I've been working on this for two days straight now... there sure seems to
> | > > be
> | > > a lot of problems with video cards and vista... argh! Any help would be
> | > > greatly appreciated.
> | > >
> | > > Thanks!
> | > >
> | > > Ty
> | > >
> | > >
> | >
>
>
>