Autoroute 2007

I am trying to install AR2007 on my Vista PC
Installs fine, full installation.
When i try to start the program I get error "your registry settings for this
application were not copied correctly. Run Setup from the location where you
orinally installed it"
I have done this but still get the same error message, and cannot start the
program.
Please help!
John

I would reset security settings to default and try it again.

HOW TO Reset Security Settings Back to the Defaults:
http://support.microsoft.com/default...b;en-us;313222
--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales...eAPostAsAnswer
Mark L. Ferguson
..

"john9872" <john9872@discussions.microsoft.com> wrote in message
news:FEFB62DB-140B-41E2-B707-FBA1346A3D18@microsoft.com...
> I am trying to install AR2007 on my Vista PC
> Installs fine, full installation.
> When i try to start the program I get error "your registry settings for
> this
> application were not copied correctly. Run Setup from the location where
> you
> orinally installed it"
> I have done this but still get the same error message, and cannot start
> the
> program.
> Please help!
> John

"john9872" <john9872@discussions.microsoft.com> wrote in message
news:FEFB62DB-140B-41E2-B707-FBA1346A3D18@microsoft.com...
> I am trying to install AR2007 on my Vista PC
> Installs fine, full installation.
> When i try to start the program I get error "your registry settings for
> this
> application were not copied correctly. Run Setup from the location where
> you
> orinally installed it"
> I have done this but still get the same error message, and cannot start
> the
> program.
> Please help!
> John

Did you try installing it somewhere other than Program Files?
Did you run the installer 'as administrator'?
If so, have you tried compatibility mode?

--
A Professional Amateur...If anyone knew it all, none of would be here!
CarGodZeroOne@hotmail.com
Change Alpha to Numeric to reply

Thanks for the info.
I have tried running the program as administrator, and it runs fine!
However, when I save the changes to the map, and try to re-open it I get the
original error message up!
I can't run this saved file as administrator either!
Any more suggestions would be welcome!
Thanks
John

"Not Me" wrote:

> "john9872" <john9872@discussions.microsoft.com> wrote in message
> news:FEFB62DB-140B-41E2-B707-FBA1346A3D18@microsoft.com...
> > I am trying to install AR2007 on my Vista PC
> > Installs fine, full installation.
> > When i try to start the program I get error "your registry settings for
> > this
> > application were not copied correctly. Run Setup from the location where
> > you
> > orinally installed it"
> > I have done this but still get the same error message, and cannot start
> > the
> > program.
> > Please help!
> > John
>
> Did you try installing it somewhere other than Program Files?
> Did you run the installer 'as administrator'?
> If so, have you tried compatibility mode?
>
> --
> A Professional Amateur...If anyone knew it all, none of would be here!
> CarGodZeroOne@hotmail.com
> Change Alpha to Numeric to reply
>
>

Thanks for the info, but the link does not work.

"Mark L. Ferguson" wrote:

> I would reset security settings to default and try it again.
>
> HOW TO Reset Security Settings Back to the Defaults:
> http://support.microsoft.com/default...b;en-us;313222
> --
> Was this helpful? Then click the Ratings button. Voting helps the web
> interface.
> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
> Mark L. Ferguson
> .
>
> "john9872" <john9872@discussions.microsoft.com> wrote in message
> news:FEFB62DB-140B-41E2-B707-FBA1346A3D18@microsoft.com...
> > I am trying to install AR2007 on my Vista PC
> > Installs fine, full installation.
> > When i try to start the program I get error "your registry settings for
> > this
> > application were not copied correctly. Run Setup from the location where
> > you
> > orinally installed it"
> > I have done this but still get the same error message, and cannot start
> > the
> > program.
> > Please help!
> > John
>

If you installed the program to Program Files, and the program tries to save
the data to that folder or subfolder(s), Vista's 'improved security' will
block the changes.
Have you asked the software maker?

--
A Professional Amateur...If anyone knew it all, none of would be here!
CarGodZeroOne@hotmail.com
Change Alpha to Numeric to reply

"john9872" <john9872@discussions.microsoft.com> wrote in message
news:C4A17092-9007-4C3D-BE89-9AA42AC95F70@microsoft.com...
> Thanks for the info.
> I have tried running the program as administrator, and it runs fine!
> However, when I save the changes to the map, and try to re-open it I get
> the
> original error message up!
> I can't run this saved file as administrator either!
> Any more suggestions would be welcome!
> Thanks
> John
>
> "Not Me" wrote:
>
>> "john9872" <john9872@discussions.microsoft.com> wrote in message
>> news:FEFB62DB-140B-41E2-B707-FBA1346A3D18@microsoft.com...
>> > I am trying to install AR2007 on my Vista PC
>> > Installs fine, full installation.
>> > When i try to start the program I get error "your registry settings for
>> > this
>> > application were not copied correctly. Run Setup from the location
>> > where
>> > you
>> > orinally installed it"
>> > I have done this but still get the same error message, and cannot start
>> > the
>> > program.
>> > Please help!
>> > John
>>
>> Did you try installing it somewhere other than Program Files?
>> Did you run the installer 'as administrator'?
>> If so, have you tried compatibility mode?
>>
>> --
>> A Professional Amateur...If anyone knew it all, none of would be here!
>> CarGodZeroOne@hotmail.com
>> Change Alpha to Numeric to reply
>>
>>

Hmm, the software maker is Microsoft (I think they did some windows vista
thing as well!)
When I save the data it is saved to my documents (or anywhere I select) not
to the program files folder or sub folder.
It is saved as a seperate file with a .axe extension.
This program is running on other vista pc's with no problem...

"Not Me" wrote:

> If you installed the program to Program Files, and the program tries to save
> the data to that folder or subfolder(s), Vista's 'improved security' will
> block the changes.
> Have you asked the software maker?
>
> --
> A Professional Amateur...If anyone knew it all, none of would be here!
> CarGodZeroOne@hotmail.com
> Change Alpha to Numeric to reply
>
> "john9872" <john9872@discussions.microsoft.com> wrote in message
> news:C4A17092-9007-4C3D-BE89-9AA42AC95F70@microsoft.com...
> > Thanks for the info.
> > I have tried running the program as administrator, and it runs fine!
> > However, when I save the changes to the map, and try to re-open it I get
> > the
> > original error message up!
> > I can't run this saved file as administrator either!
> > Any more suggestions would be welcome!
> > Thanks
> > John
> >
> > "Not Me" wrote:
> >
> >> "john9872" <john9872@discussions.microsoft.com> wrote in message
> >> news:FEFB62DB-140B-41E2-B707-FBA1346A3D18@microsoft.com...
> >> > I am trying to install AR2007 on my Vista PC
> >> > Installs fine, full installation.
> >> > When i try to start the program I get error "your registry settings for
> >> > this
> >> > application were not copied correctly. Run Setup from the location
> >> > where
> >> > you
> >> > orinally installed it"
> >> > I have done this but still get the same error message, and cannot start
> >> > the
> >> > program.
> >> > Please help!
> >> > John
> >>
> >> Did you try installing it somewhere other than Program Files?
> >> Did you run the installer 'as administrator'?
> >> If so, have you tried compatibility mode?
> >>
> >> --
> >> A Professional Amateur...If anyone knew it all, none of would be here!
> >> CarGodZeroOne@hotmail.com
> >> Change Alpha to Numeric to reply
> >>
> >>

I don't use it, so I am shooting in the dark.
I don't suppose there is a newsgroup dedicated to that program?

--
A Professional Amateur...If anyone knew it all, none of would be here!
CarGodZeroOne@hotmail.com
Change Alpha to Numeric to reply

"john9872" <john9872@discussions.microsoft.com> wrote in message
news:CDE8725C-0875-4428-93A0-25B22EB62B8E@microsoft.com...
> Hmm, the software maker is Microsoft (I think they did some windows vista
> thing as well!)
> When I save the data it is saved to my documents (or anywhere I select)
> not
> to the program files folder or sub folder.
> It is saved as a seperate file with a .axe extension.
> This program is running on other vista pc's with no problem...
>
> "Not Me" wrote:
>
>> If you installed the program to Program Files, and the program tries to
>> save
>> the data to that folder or subfolder(s), Vista's 'improved security' will
>> block the changes.
>> Have you asked the software maker?
>>
>> --
>> A Professional Amateur...If anyone knew it all, none of would be here!
>> CarGodZeroOne@hotmail.com
>> Change Alpha to Numeric to reply
>>
>> "john9872" <john9872@discussions.microsoft.com> wrote in message
>> news:C4A17092-9007-4C3D-BE89-9AA42AC95F70@microsoft.com...
>> > Thanks for the info.
>> > I have tried running the program as administrator, and it runs fine!
>> > However, when I save the changes to the map, and try to re-open it I
>> > get
>> > the
>> > original error message up!
>> > I can't run this saved file as administrator either!
>> > Any more suggestions would be welcome!
>> > Thanks
>> > John
>> >
>> > "Not Me" wrote:
>> >
>> >> "john9872" <john9872@discussions.microsoft.com> wrote in message
>> >> news:FEFB62DB-140B-41E2-B707-FBA1346A3D18@microsoft.com...
>> >> > I am trying to install AR2007 on my Vista PC
>> >> > Installs fine, full installation.
>> >> > When i try to start the program I get error "your registry settings
>> >> > for
>> >> > this
>> >> > application were not copied correctly. Run Setup from the location
>> >> > where
>> >> > you
>> >> > orinally installed it"
>> >> > I have done this but still get the same error message, and cannot
>> >> > start
>> >> > the
>> >> > program.
>> >> > Please help!
>> >> > John
>> >>
>> >> Did you try installing it somewhere other than Program Files?
>> >> Did you run the installer 'as administrator'?
>> >> If so, have you tried compatibility mode?
>> >>
>> >> --
>> >> A Professional Amateur...If anyone knew it all, none of would be here!
>> >> CarGodZeroOne@hotmail.com
>> >> Change Alpha to Numeric to reply
>> >>
>> >>

Cheers, I appreciate your help!
I have looked for Autoroute Newsgroups but can't seem to find one!
Took me half an hour to find this one!
John

"Not Me" wrote:

> I don't use it, so I am shooting in the dark.
> I don't suppose there is a newsgroup dedicated to that program?
>
> --
> A Professional Amateur...If anyone knew it all, none of would be here!
> CarGodZeroOne@hotmail.com
> Change Alpha to Numeric to reply
>
> "john9872" <john9872@discussions.microsoft.com> wrote in message
> news:CDE8725C-0875-4428-93A0-25B22EB62B8E@microsoft.com...
> > Hmm, the software maker is Microsoft (I think they did some windows vista
> > thing as well!)
> > When I save the data it is saved to my documents (or anywhere I select)
> > not
> > to the program files folder or sub folder.
> > It is saved as a seperate file with a .axe extension.
> > This program is running on other vista pc's with no problem...
> >
> > "Not Me" wrote:
> >
> >> If you installed the program to Program Files, and the program tries to
> >> save
> >> the data to that folder or subfolder(s), Vista's 'improved security' will
> >> block the changes.
> >> Have you asked the software maker?
> >>
> >> --
> >> A Professional Amateur...If anyone knew it all, none of would be here!
> >> CarGodZeroOne@hotmail.com
> >> Change Alpha to Numeric to reply
> >>
> >> "john9872" <john9872@discussions.microsoft.com> wrote in message
> >> news:C4A17092-9007-4C3D-BE89-9AA42AC95F70@microsoft.com...
> >> > Thanks for the info.
> >> > I have tried running the program as administrator, and it runs fine!
> >> > However, when I save the changes to the map, and try to re-open it I
> >> > get
> >> > the
> >> > original error message up!
> >> > I can't run this saved file as administrator either!
> >> > Any more suggestions would be welcome!
> >> > Thanks
> >> > John
> >> >
> >> > "Not Me" wrote:
> >> >
> >> >> "john9872" <john9872@discussions.microsoft.com> wrote in message
> >> >> news:FEFB62DB-140B-41E2-B707-FBA1346A3D18@microsoft.com...
> >> >> > I am trying to install AR2007 on my Vista PC
> >> >> > Installs fine, full installation.
> >> >> > When i try to start the program I get error "your registry settings
> >> >> > for
> >> >> > this
> >> >> > application were not copied correctly. Run Setup from the location
> >> >> > where
> >> >> > you
> >> >> > orinally installed it"
> >> >> > I have done this but still get the same error message, and cannot
> >> >> > start
> >> >> > the
> >> >> > program.
> >> >> > Please help!
> >> >> > John
> >> >>
> >> >> Did you try installing it somewhere other than Program Files?
> >> >> Did you run the installer 'as administrator'?
> >> >> If so, have you tried compatibility mode?
> >> >>
> >> >> --
> >> >> A Professional Amateur...If anyone knew it all, none of would be here!
> >> >> CarGodZeroOne@hotmail.com
> >> >> Change Alpha to Numeric to reply
> >> >>
> >> >>

Never used AR, but I just found this group....
microsoft.public.uk.autoroute
on
msnews.microsoft.com


--
Vista Home Premium 32 SP1
http://get.live.com/wlmail/overview


"john9872" <john9872@discussions.microsoft.com> wrote in message
news:BFCC3E61-E7E0-440C-A7B9-93CECA888C19@microsoft.com...
> Cheers, I appreciate your help!
> I have looked for Autoroute Newsgroups but can't seem to find one!
> Took me half an hour to find this one!
> John
>
> "Not Me" wrote:
>
>> I don't use it, so I am shooting in the dark.
>> I don't suppose there is a newsgroup dedicated to that program?
>>
>> --
>> A Professional Amateur...If anyone knew it all, none of would be here!
>> CarGodZeroOne@hotmail.com
>> Change Alpha to Numeric to reply
>>
>> "john9872" <john9872@discussions.microsoft.com> wrote in message
>> news:CDE8725C-0875-4428-93A0-25B22EB62B8E@microsoft.com...
>> > Hmm, the software maker is Microsoft (I think they did some windows
>> > vista
>> > thing as well!)
>> > When I save the data it is saved to my documents (or anywhere I select)
>> > not
>> > to the program files folder or sub folder.
>> > It is saved as a seperate file with a .axe extension.
>> > This program is running on other vista pc's with no problem...
>> >
>> > "Not Me" wrote:
>> >
>> >> If you installed the program to Program Files, and the program tries
>> >> to
>> >> save
>> >> the data to that folder or subfolder(s), Vista's 'improved security'
>> >> will
>> >> block the changes.
>> >> Have you asked the software maker?
>> >>
>> >> --
>> >> A Professional Amateur...If anyone knew it all, none of would be here!
>> >> CarGodZeroOne@hotmail.com
>> >> Change Alpha to Numeric to reply
>> >>
>> >> "john9872" <john9872@discussions.microsoft.com> wrote in message
>> >> news:C4A17092-9007-4C3D-BE89-9AA42AC95F70@microsoft.com...
>> >> > Thanks for the info.
>> >> > I have tried running the program as administrator, and it runs fine!
>> >> > However, when I save the changes to the map, and try to re-open it I
>> >> > get
>> >> > the
>> >> > original error message up!
>> >> > I can't run this saved file as administrator either!
>> >> > Any more suggestions would be welcome!
>> >> > Thanks
>> >> > John
>> >> >
>> >> > "Not Me" wrote:
>> >> >
>> >> >> "john9872" <john9872@discussions.microsoft.com> wrote in message
>> >> >> news:FEFB62DB-140B-41E2-B707-FBA1346A3D18@microsoft.com...
>> >> >> > I am trying to install AR2007 on my Vista PC
>> >> >> > Installs fine, full installation.
>> >> >> > When i try to start the program I get error "your registry
>> >> >> > settings
>> >> >> > for
>> >> >> > this
>> >> >> > application were not copied correctly. Run Setup from the
>> >> >> > location
>> >> >> > where
>> >> >> > you
>> >> >> > orinally installed it"
>> >> >> > I have done this but still get the same error message, and cannot
>> >> >> > start
>> >> >> > the
>> >> >> > program.
>> >> >> > Please help!
>> >> >> > John
>> >> >>
>> >> >> Did you try installing it somewhere other than Program Files?
>> >> >> Did you run the installer 'as administrator'?
>> >> >> If so, have you tried compatibility mode?
>> >> >>
>> >> >> --
>> >> >> A Professional Amateur...If anyone knew it all, none of would be
>> >> >> here!
>> >> >> CarGodZeroOne@hotmail.com
>> >> >> Change Alpha to Numeric to reply
>> >> >>
>> >> >>