Dx10 issue

I was informed by the developers over at Flagship Studios that I may
have a corrupt install of DX10 on my system. I went to reinstall DX10
but it tells me that I have the most up to date version and aborts the
install.

Does anyone know a way I can reinstall DX10?



Also, I would like to try intalling DX9c to see if it helps any. Can
someone link me to wich download I should use for this?


--
derelict360

I thought that DX10 was inbuilt in Vista and that there was no
standalone installer for it? Am I wrong? Am hitting the ms download
website to see if theres any standalone installer for DX10.


--
Dragor

My rig: Intel Core2Duo E6300 @1.86GHz, 1.5GB DDR2SDRAM 667MHz, nVidia
GeForce 6600 256MB PCI-E, ASUS P5LD2VM-SE [Intel 945 Chipset] mobo, 400
W PSU.

Link to DirectX9.0c:
http://www.microsoft.com/downloads/d...displaylang=en

See if that fixes your issues. It may not be a corrupt DX10 install (well,
it shouldn't be).

--

Dustin Harper
dharper@vistarip.com
http://www.vistarip.com | Vista Resource & Information Page

Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales...eAPostAsAnswer




"derelict360" <guest@unknown-email.com> wrote in message
news:9ca7bd3ad0ed1f96ebc22c2d11b47750@nntp-gateway.com...
>
> I was informed by the developers over at Flagship Studios that I may
> have a corrupt install of DX10 on my system. I went to reinstall DX10
> but it tells me that I have the most up to date version and aborts the
> install.
>
> Does anyone know a way I can reinstall DX10?
>
>
>
> Also, I would like to try intalling DX9c to see if it helps any. Can
> someone link me to wich download I should use for this?
>
>
> --
> derelict360

derelict360 <guest@unknown-email.com> wrote in
news:9ca7bd3ad0ed1f96ebc22c2d11b47750@nntp-gateway.com:

>
> I was informed by the developers over at Flagship Studios that I may
> have a corrupt install of DX10 on my system.

That's what they all say because they don't actually know what the problem
is. I'm surprised they didn't tell you to defrag your HDD to fix the
problem. Run chkdsk and look at the report it generates, it will tell you
if you had any corrupted files.

Thanks for the replis people. This gives me some stuff to go on for now.


They believe that the DX10 engine failure is in effect because I am
missing graphics in DX10 that are present in the DX9 engine. Here is the
original inquiry.

I actually havent tried an uninstall / reinstall yet . Ill write back
after the reinstall and defrag and all that.

> *Me:*
>
> For instance, if I cast a Personal Relocation Device in the DX9
> engine, I will see a column of light with a dark purple circle and
> active
> ripples on the floor. In DX10, the only thing I see is a column of
> light.
> There is no dark purple circle with active ripples on the floor in the
> DX10
> engine.
> Other spells and activities have a similar discrepency. In DX9, if I
> attack
> a barrell, there is an explosion effect. In DX10, when attacked, the
> barell
> will simply fragment and then dissappear.
> In addition to this, for people with the above mentioned setup (Vists
> 64 and
> DX10), the DX9 engine appears to behave much more effectively. I have
> had
> times with DX10 where i get 60 fps, just like I do with DX9.
> But 99.99% of the time, the DX10 engine behaves ineffectively. The
> engine
> will render 18-25 frames per second under normal load. In a party, in
> open
> air locations, the DX10 engine will sustain FPS levels as low as 1-10.
> This
> effectively renders the DX10 engine unplayable.


--
derelict360

derelict360 <guest@unknown-email.com> wrote in
news:611efa5d4dd9e4e98ed4e49d89188a61@nntp-gateway.com:

>
> Thanks for the replis people. This gives me some stuff to go on for now.
>
>
> They believe that the DX10 engine failure is in effect because I am
> missing graphics in DX10 that are present in the DX9 engine.

That's an easy fix. Just download DXwebsetup from Microsoft and run that
while connected to the internet.

http://www.microsoft.com/downloads/d...2da43d38-db71-
4c1b-bc6a-9b6652cd92a3&displaylang=en

derelict360 <guest@unknown-email.com> wrote in
news:9ca7bd3ad0ed1f96ebc22c2d11b47750@nntp-gateway.com:

>
> I was informed by the developers over at Flagship Studios that I may
> have a corrupt install of DX10 on my system. I went to reinstall DX10
> but it tells me that I have the most up to date version and aborts the
> install.
>
> Does anyone know a way I can reinstall DX10?

Actually, this is the response that Tech Support gives when they don't
know the answer to your inquiry.

I used to work in Cust Support for EA, Back in the EARLY days of
DirectX, we used to get tons of people calling saying, "well Gateway
said that DirectX was the problem and it didn't work", when basically
DirectX is either installed, or it's not installed. There really is no,
"working or not working", It was usually the video drivers or crappy
hardware that had no chance of running a 3D game.

Ah, good times. I miss my Voodoo2's

To answer the question that has been answered, you can't mess up DirectX
10, there's really no way to uninstall it unless you've been deleting
files from c:\windows\system32, and most people I talk to don't do that.

If you did, then Vista should stop working because Aero uses DirectX as
I understand it. /shrug Probably wrong.

http://www.microsoft.com/directx

This link has been around for nearly a decade now, it should eventually
take you to an application called "dxwebsetup.exe"

Running this application on your system installs and checks all versions
of DirectX for Vista or Windows XP/2K, and if it says, "all directx OK",
then it's all OK.

There's really no way to "corrupt" directX unless your Hard drive is
failing and causing files to be corrupted, but that's unusual because
even failing hard drives won't change files unless they are being
written, and the only time you should write or modify DirectX files is
when installing Vista or running DXWebSetup.

So, long story short. I have no idea what's going on. Update drivers,
post system specs, call it a day.

HAPPY MONDAY EVERYONE! (OK, I spilled a cup of coffee in my lap, i'm
pissy, sorry.)

--
-A.

I can assume from your description that you are reffering to Hellgate:London,
This is a known issue with Hellgate and not a Direct10 corruption issue, If
you are running an ATI card the drivers from 8.5 upwards appear to have
resolved this. If NVIDIA then again I suggest latest drivers. There is also
an issue when Anistropic filtering is turned on that corrupts the graphics on
this game. Many users have had the same issue. When i update my graphics
drivers this stopped happening for me

"derelict360" wrote:

>
> I was informed by the developers over at Flagship Studios that I may
> have a corrupt install of DX10 on my system. I went to reinstall DX10
> but it tells me that I have the most up to date version and aborts the
> install.
>
> Does anyone know a way I can reinstall DX10?
>
>
>
> Also, I would like to try intalling DX9c to see if it helps any. Can
> someone link me to wich download I should use for this?
>
>
> --
> derelict360
>