In your Networking and Sharing Center, what is Password Protected Sharing
set to?
--
Cari (MS-MVP)
Windows Technologies - Printing & Imaging
http://www.coribright.com/windows

"Taylor" <Taylor@discussions.microsoft.com> wrote in message
news:85E0A8EB-8208-4D3E-8A5C-B1FD74A3978A@microsoft.com...
>I agree, however as I stated - the device works fine. It prints from every
> other bluetooth object I own, except Vista because Microsoft Vista
> requires a
> passkey for each and every connectable device. It won't allow me to say
> "This
> device does not need a passkey to print to it" except when adding it to
> the
> Bluetooth Device panel. Each time the computer prints to the device, it
> says
> "A Bluetooth Device is trying to access this computer... Click here to
> allow." Then requests a passkey. Which there is none. Entering nothing in
> results in a terminating error inside Vista.
>
> So like I asked originally... Is there a way to set BT device up to be
> connected to your Vista system and bypass the requirement for a passkey
> when
> a passkey is not required to access the device?
>
> "Cari (MS-MVP)" wrote:
>
>> It's D-Link's responsibility to support their own hardware. If this is
>> an
>> older device, your only option may be to purchase a newer unit that does
>> support Vista.
>> --
>> Cari (MS-MVP)
>> Windows Technologies - Printing & Imaging
>> http://www.coribright.com/windows
>>
>> "Taylor" <Taylor@discussions.microsoft.com> wrote in message
>> news:521F58D9-BAE1-43E5-A198-73586224AD2C@microsoft.com...
>> > Notta - They will not be supporting the Bt320 on Vista. Hence, I am
>> > here,
>> > asking for help.
>> >
>> > "Cari (MS-MVP)" wrote:
>> >
>> >> And D-Link have said what?
>> >> --
>> >> Cari (MS-MVP)
>> >> Windows Technologies - Printing & Imaging
>> >> http://www.coribright.com/windows
>> >>
>> >> "Taylor" <Taylor@discussions.microsoft.com> wrote in message
>> >> news:8042D3A1-8D84-4589-A2D6-2A331E917078@microsoft.com...
>> >> > Hi, I have a D-Link Bluetooth-320 print server that I can't get
>> >> > Vista
>> >> > to
>> >> > talk
>> >> > to correctly. I can install the printer that is on the server, and
>> >> > get
>> >> > Vista
>> >> > to recognise that the printer is out there waiting to be used, but
>> >> > each
>> >> > time
>> >> > I try to print a test page, it asks for a Passkey - which the server
>> >> > does
>> >> > not
>> >> > require.
>> >> >
>> >> > Is there a way to install the print server and print to it bypassing
>> >> > or
>> >> > disabling the requirement for a passkey? I can install the device
>> >> > under
>> >> > Bluetooth Devices without a passkey, but that doesn't stop Vista for
>> >> > asking
>> >> > for one when I attempt printing to it.
>> >>
>> >>
>>
>>