Router has not any instructions on port configuration.
And I did not see there any explanations about LPD...

So, I disabled bi-directional option - but result was the same.

"Alan Morris [MSFT]" wrote:

> Does the router manual have instructions on the proper port configuration?
>
> The manual should also have the queue name requirements if the device
> supports the LPD.
>
> I would also disable Bi-directional on the printer properties Ports tab
> since Epson's normally attempt to perform ink status on the device that is
> normally attached to the local system.
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Leonid" <Leonid@discussions.microsoft.com> wrote in message
> news:F9A8AC6D-5C0E-4534-8B89-C8BEC14C34D9@microsoft.com...
> >I have printer Epson CX3700 connecting to router (ip 192.168.1.1). I've
> > change OS from XP to Vista 32bit Business.
> > Now I can not print anithing.
> > If I install the port settings as ROW protocol (port 9100), printer starts
> > with printing normally, but it could not finish (as cycle job).
> > If I install the port setting as LPR protocol - nothing happend.
>
>
>